MSP430FR6888

Product Folder Order Now Technical Documents Tools & Software Support & Community MSP430FR6889, MSP430FR68891, MSP430FR6888, MSP430FR6887 MSP430FR5889, MSP430FR58891, MSP430FR5888, MSP430FR5887 SLASE32C – AUGUST 2014 – REVISED AUGUST 2018 MSP430FR688x(1), MSP430FR588x(1) Mixed-Signal Microcontrollers 1 Device Overview 1.1 Features 1 Embedded Microcontroller – 16-Bit RISC Architecture up to 16-MHz Clock – Wide Supply Voltage Range From 3.6 V Down to 1.8 V (Minimum Supply Voltage is Restricted by SVS Levels, See the SVS Specifications) Optimized Ultra-Low-Power Modes – Active Mode: Approximately 100 µA/MHz – Standby (LPM3 With VLO): 0.4 µA (Typical) – Real-Time Clock (RTC) (LPM3.5): 0.35 µA (Typical) (1) – Shutdown (LPM4.5): 0.02 µA (Typical) Ultra-Low-Power Ferroelectric RAM (FRAM) – Up to 128KB of Nonvolatile Memory – Ultra-Low-Power Writes – Fast Write at 125 ns per Word (64KB in 4 ms) – Unified Memory = Program + Data + Storage in One Single Space – 1015 Write Cycle Endurance – Radiation Resistant and Nonmagnetic Intelligent Digital Peripherals – 32-Bit Hardware Multiplier (MPY) – Three-Channel Internal Direct Memory Access (DMA) – RTC With Calendar and Alarm Functions – Five 16-Bit Timers With up to 7 Capture/Compare Registers Each – 16-Bit and 32-Bit Cyclic Redundancy Checker (CRC16, CRC32) High-Performance Analog – Extended Scan Interface (ESI) for Background Water, Heat, and Gas Volume Measurement – 16-Channel Analog Comparator – 12-Bit Analog-to-Digita...