MSP430FR5967

Product Folder Order Now Technical Documents Tools & Software Support & Community Reference Design MSP430FR5969, MSP430FR59691, MSP430FR5968, MSP430FR5967 MSP430FR5959, MSP430FR5958, MSP430FR5957 MSP430FR5949, MSP430FR5948, MSP430FR5947, MSP430FR59471 SLAS704G – OCTOBER 2012 – REVISED AUGUST 2018 MSP430FR596x, MSP430FR594x Mixed-Signal Microcontrollers 1 Device Overview 1.1 Features 1 Embedded Microcontroller – 16-Bit RISC Architecture up to 16‑MHz Clock – Wide Supply Voltage Range From 3.6 V Down to 1.8 V (Minimum Supply Voltage is Restricted by SVS Levels, See the SVS Specifications) Optimized Ultra-Low-Power Modes – Active Mode: Approximately 100 µA/MHz – Standby (LPM3 With VLO): 0.4 µA (Typical) – Real-Time Clock (LPM3.5): 0.25 µA (Typical) (1) – Shutdown (LPM4.5): 0.02 µA (Typical) Ultra-Low-Power Ferroelectric RAM (FRAM) – Up to 64KB of Nonvolatile Memory – Ultra-Low-Power Writes – Fast Write at 125 ns Per Word (64KB in 4 ms) – Unified Memory = Program + Data + Storage in One Single Space – 1015 Write Cycle Endurance – Radiation Resistant and Nonmagnetic Intelligent Digital Peripherals – 32-Bit Hardware Multiplier (MPY) – 3-Channel Internal DMA – Real-Time Clock (RTC) With Calendar and Alarm Functions – Five 16-Bit Timers With up to Seven Capture/Compare Registers Each – 16-Bit Cyclic Redundancy Checker (CRC) High-Performance Analog – 16-Channel Analog Comparator – 12-Bit Analog-to-Digital Converter (ADC) With Internal Reference and Sample-and-Hold an...