MSP430FR2110

MSP430FR2111, MSP430FR2110, MSP430FR2100, MSP430FR2000 SLASE78E – AUGUST 2016 – REVISED JUNE 2021 MSP430FR21xx, MSP430FR2000 Mixed-Signal Microcontrollers 1 Features Embedded microcontroller – 16-bit RISC architecture up to 16 MHz – Wide supply voltage range from 3.6 V down to 1.8 V (minimum supply voltage is restricted by SVS levels, see the SVS specifications) Optimized low-power modes (at 3 V) – Active mode: 120 µA/MHz – Standby LPM3.5 with VLO: 1 µA Real-time clock (RTC) counter (LPM3.5 with 32768-Hz crystal): 1 µA – Shutdown (LPM4.5): 34 nA without SVS High-performance analog – 8-channel 10-bit analog-to-digital converter (ADC) Integrated temperature sensor Internal 1.5-V reference Sample-and-hold 200 ksps – Enhanced comparator (eCOMP) Integrated 6-bit DAC as reference voltage Programmable hysteresis Configurable high-power and low-power modes Low-power ferroelectric RAM (FRAM) – Up to 3.75KB of nonvolatile memory – Built-in error correction code (ECC) – Configurable write protection – Unified memory of program, constants, and storage – 1015 write cycle endurance – Radiation resistant and nonmagnetic Intelligent digital peripherals – One 16-bit timer with three capture/compare registers (Timer_B3) – One 16-bit counter-only RTC counter – 16-bit cyclic redundancy checker (CRC) Enhanced serial communications – Enhanced USCI A (eUSCI_A) supports UART, IrDA, and SPI Clock system (CS) – On-chip 32-kHz RC oscillator (REFO) – On-chip 16-MHz digita...