TUSB320 Control Datasheet

TUSB320 Datasheet PDF, Equivalent


Part Number

TUSB320

Description

USB Type-C Configuration Channel Logic and Port Control

Manufacture

etcTI

Total Page 30 Pages
Datasheet
Download TUSB320 Datasheet


TUSB320
Product
Folder
Order
Now
Technical
Documents
Tools &
Software
Support &
Community
TUSB320, TUSB320I
SLLSEN9E – MAY 2015 – REVISED MAY 2017
TUSB320 USB Type-C™ Configuration Channel Logic and Port Control
1 Features
1 USB Type-C™ Specification 1.1
• Backward Compatible with USB Type-C
Specification 1.0
• Supports Up to 3 A of Current Advertisement and
Detection
• Mode Configuration
– Host Only – DFP (Source)
– Device Only – UFP (Sink)
– Dual Role Port – DRP
• Channel Configuration (CC)
– Attach of USB Port Detection
– Cable Orientation Detection
– Role Detection
– Type-C Current Mode (Default, Medium, High)
• VBUS Detection
• I2C or GPIO Control
• Role Configuration Control through I2C
• Supply Voltage: 2.7 V to 5 V
• Low Current Consumption
• Industrial Temperature Range of –40 to 85°C
2 Applications
• Host, Device, Dual Role Port Applications
• Mobile Phones
• Tablets and Notebooks
• USB Peripherals
SPACER
Simplified Schematic
3 Description
The TUSB320 device enables USB Type-C ports with
the configuration channel (CC) logic needed for Type-
C ecosystems. The TUSB320 device uses the CC
pins to determine port attach and detach, cable
orientation, role detection, and port control for Type-C
current mode. The TUSB320 device can be
configured as a downstream facing port (DFP),
upstream facing port (UFP) or a dual role port (DRP)
making it ideal for any application.
The TUSB320 device alternates configuration as a
DFP or UFP according to the Type-C Specifications.
The CC logic block monitors the CC1 and CC2 pins
for pullup or pulldown resistances to determine when
a USB port has been attached, the orientation of the
cable, and the role detected. The CC logic detects
the Type-C current mode as default, medium, or high
depending on the role detected. VBUS detection is
implemented to determine a successful attach in UFP
and DRP modes.
The device operates over a wide supply range and
has low-power consumption. The TUSB320 device is
available in industrial and commercial temperature
ranges.
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
TUSB320
X2QFN (12)
1.60 mm × 1.60 mm
TUSB320I
X2QFN (12)
1.60 mm × 1.60 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Sample Applications
VBUS
VBUS
Detection
CC Logic
For Mode
Configuration and
Detection
I2C
GPIOs
Controller
CC1
CC2
GPIO
Copyright © 2016, Texas Instruments Incorporated
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.

TUSB320
TUSB320, TUSB320I
SLLSEN9E – MAY 2015 – REVISED MAY 2017
www.ti.com
Table of Contents
1 Features .................................................................. 1
2 Applications ........................................................... 1
3 Description ............................................................. 1
4 Revision History..................................................... 2
5 Pin Configuration and Functions ......................... 4
6 Specifications......................................................... 5
6.1 Absolute Maximum Ratings ...................................... 5
6.2 ESD Ratings.............................................................. 5
6.3 Recommended Operating Conditions....................... 5
6.4 Thermal Information .................................................. 5
6.5 Electrical Characteristics........................................... 6
6.6 Timing Requirements ................................................ 7
6.7 Switching Characteristics .......................................... 7
7 Detailed Description .............................................. 9
7.1 Overview ................................................................... 9
7.2 Feature Description................................................. 10
7.3 Device Functional Modes........................................ 13
7.4 Programming........................................................... 15
7.5 Register Maps ......................................................... 16
8 Application and Implementation ........................ 19
8.1 Application Information............................................ 19
8.2 Typical Application .................................................. 21
8.3 Initialization Set Up ................................................ 27
9 Power Supply Recommendations...................... 27
10 Layout................................................................... 27
10.1 Layout Guidelines ................................................. 27
10.2 Layout Example .................................................... 27
11 Device and Documentation Support ................. 28
11.1 Related Links ........................................................ 28
11.2 Receiving Notification of Documentation Updates 28
11.3 Community Resources.......................................... 28
11.4 Trademarks ........................................................... 28
11.5 Electrostatic Discharge Caution ............................ 28
11.6 Glossary ................................................................ 28
12 Mechanical, Packaging, and Orderable
Information ........................................................... 28
4 Revision History
Changes from Revision D (October 2016) to Revision E
Page
• Changed RVBUS values From: MIN = 891, TYP = 900, MAX = 909 KΩ To: MIN = 855, TYP = 887, MAX = 920 KΩ ........... 7
Changes from Revision C (September 2016) to Revision D
Page
• Changed text for Pin 7 in the Pin Functions table From: "default current mode detected (H); medium or high current
mode detected (L)." To: "Refer to Table 3 for more details." ................................................................................................. 4
• Changed text for Pin 8 in the Pin Functions table From: "default or medium current mode detected (H); high current
mode detected (L)." To: "Refer to Table 3 for more details." ................................................................................................. 4
Changes from Revision B (March 2016) to Revision C
Page
• Changed pins CC1 and CC2 values From: MIN = –0.3 MAX = VDD + 0.3 To: MIN –0.3 MAX = 6 in the Absolute
Maximum Ratings ................................................................................................................................................................... 5
Changes from Revision A (June 2015) to Revision B
Page
• Added Note 1 and 2 to the Pin Functions table...................................................................................................................... 4
• Changed the DESCRIPTION of pin EN_N pin in the Pin Functions table ............................................................................. 4
• Changed the DESCRIPTION of pin VDD in the Pin Functions table ....................................................................................... 4
• Changed the MIN, TYP, and MAX values for VTH_UFP_CC_USB, VTH_UFP_CC_MED, and VTH_UFP_CC_HIGH in the Electrical
Characteristics table. .............................................................................................................................................................. 6
• Added Note 2 to the Electrical Characteristics table ............................................................................................................. 6
• Added Test Condition "See Figure 1" to VBUS_THR in the Electrical Characteristics .............................................................. 7
• Updated Timing Requirements table with new values. .......................................................................................................... 7
• Added Data hold time, Data valid time, Data valid acknowledge time, and Cbus_400kHz values to Timing Requirements
table. ....................................................................................................................................................................................... 7
• Changed the Switching Characteristics table ........................................................................................................................ 7
• Added Note: "SW must make sure..." to the Description of INTERRUPT_STATUS in Table 7 ......................................... 17
2 Submit Documentation Feedback
Copyright © 2015–2017, Texas Instruments Incorporated
Product Folder Links: TUSB320


Features Product Folder Order Now Technical Doc uments Tools & Software Support & Com munity TUSB320, TUSB320I SLLSEN9E – MAY 2015 – REVISED MAY 2017 TUSB320 U SB Type-C™ Configuration Channel Logi c and Port Control 1 Features •1 USB Type-C™ Specification 1.1 • Backwa rd Compatible with USB Type-C Specifica tion 1.0 • Supports Up to 3 A of Curr ent Advertisement and Detection • Mod e Configuration – Host Only – DFP ( Source) – Device Only – UFP (Sink) – Dual Role Port – DRP • Channel Configuration (CC) – Attach of USB Po rt Detection – Cable Orientation Dete ction – Role Detection – Type-C Cur rent Mode (Default, Medium, High) • V BUS Detection • I2C or GPIO Control Role Configuration Control through I 2C • Supply Voltage: 2.7 V to 5 V • Low Current Consumption • Industrial Temperature Range of –40 to 85°C 2 Applications • Host, Device, Dual R ole Port Applications • Mobile Phones • Tablets and Notebooks • USB Peripherals SPACER Simplified Schematic 3 Description The TUSB320 device enables USB T.
Keywords TUSB320, datasheet, pdf, etcTI, USB, Type-C, Configuration, Channel, Logic, and, Port, Control, USB320, SB320, B320, TUSB32, TUSB3, TUSB, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)