ISPXPGA200E Device Datasheet

ISPXPGA200E Datasheet PDF, Equivalent

Part Number



eXpanded Programmable Logic Device


Lattice Semiconductor

Total Page 30 Pages
PDF Download
Download ISPXPGA200E Datasheet PDF

February 2010
ispXPGA® Family
Data Sheet DS1026
Non-volatile, Infinitely Reconfigurable
• Instant-on - Powers up in microseconds via
• Microprocessor configuration interface
• Program E2CMOS while operating from SRAM
on-chip E2CMOS® based memory
• No external configuration memory
Eight sysCLOCK™ Phase Locked Loops
(PLLs) for Clock Management
• Excellent design security, no bit stream to intercept
• True PLL technology
• Reconfigure SRAM based logic in milliseconds
• 10MHz to 320MHz operation
High Logic Density for System-level
• Clock multiplication and division
• Phase adjustment
• 139K to 1.25M functional gates
• Shift clocks in 250ps steps
• 160 to 496 I/O
• 1.8V, 2.5V, and 3.3V VCC operation
sysIO™ for High System Performance
• High speed memory support through SSTL and
• Up to 414Kb sysMEM™ embedded memory
High Performance Programmable Function
• Advanced buses supported through PCI, GTL+,
Unit (PFU)
• Four LUT-4 per PFU supports wide and narrow
• Standard logic supported through LVTTL,
LVCMOS 3.3, 2.5 and 1.8
• Dual flip-flops per LUT-4 for extensive pipelining
• 5V tolerant I/O for LVCMOS 3.3 and LVTTL
• Dedicated logic for adders, multipliers, multiplex-
ers, and counters
• Programmable drive strength for series termination
Flexible Memory Resources
• Programmable bus maintenance
• Multiple sysMEM Embedded RAM Blocks
– Single port, Dual port, and FIFO operation
• 64-bit distributed memory in each PFU
– Single port, Double port, FIFO, and Shift
Register operation
Flexible Programming, Reconfiguration,
and Testing
• Supports IEEE 1532 and 1149.1
Two Options Available
• High-performance sysHSI (standard part number)
• Low-cost, no sysHSI (“E-Series”)
sysHSI™ Capability for Ultra Fast Serial
• Up to 800Mbps performance
• Up to 20 channels per device
• Built in Clock Data Recovery (CDR) and
Serialization and De-serialization (SERDES)
Table 1. ispXPGA Family Selection Guide
ispXPGA 125/E ispXPGA 200/E ispXPGA 500/E ispXPGA 1200/E3
Functional Gates
Logic FFs
sysMEM Memory
Distributed Memory
20 24 40 90
sysHSI Channels1
4 8 12 20
User I/O
256 fpBGA
516 fpBGA2
256 fpBGA
516 fpBGA2
516 fpBGA2
900 fpBGA
680 fpSBGA
900 fpBGA
1. “E-Series” does not support sysHSI.
2. FH516 package was converted to F516 via PCN #09A-08.
3. Discontinued via PCN #03A-10.
© 2010 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at All other brand
or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.

Lattice Semiconductor
ispXPGA Family Data Sheet
ispXPGA Family Overview
The ispXPGA family of devices provides the ideal vehicle for the creation of high-performance logic designs that
are both non-volatile and infinitely re-programmable. Other FPGA solutions force a compromise, being either re-
programmable or non-volatile. This family couples this capability with a mainstream architecture containing the fea-
tures required for today’s system-level design.
The ispXPGA family is available in two options. The standard device supports sysHSI capability for ultra fast serial
communications while the lower-cost “E-Series” supports the same high-performance FPGA fabric without the sys-
HSI Block.
Electrically Erasable CMOS (E2CMOS) memory cells provide the ispXPGA family with non-volatile capability.
These allow logic to be functional microseconds after power is applied, allowing easy interfacing in many applica-
tions. This capability also means that expensive external configuration memories are not required and that designs
can be secured from unauthorized read back. Internal SRAM cells allow the device to be infinitely reconfigured if
desired. Both the SRAM and E2CMOS cells can be programmed and verified through the IEEE 1532 industry stan-
dard. Additionally, the SRAM cells can be configured and read-back through the sysCONFIG™ peripheral port.
The family spans the density and I/O range required for the majority of today’s logic designs, 139K to 1.25M func-
tional gates and 160 to 496 I/O. The devices are available for operation from 1.8V, 2.5V, and 3.3V power supplies,
providing easy integration into the overall system.
System-level design needs are met through the incorporation of sysMEM dual-port memory blocks, sysIO
advanced I/O support, and sysCLOCK Phase Locked Loops (PLLs). High-speed serial communications are sup-
ported through multiple sysHSI blocks, which provide clock data recovery (CDR) and serialization/de-serialization
The ispLEVER™ design tool from Lattice allows easy implementation of designs using the ispXPGA product. Syn-
thesis library support is available for major logic synthesis tools. The ispLEVER tool takes the output from these
common synthesis packages and place and routes the design in the ispXPGA product. The tool supports floor
planning and the management of other constraints within the device. The tool also provides outputs to common
timing analysis tools for timing analysis.
To increase designer productivity, Lattice provides a variety of pre-designed modules referred to as IP cores for the
ispXPGA product. These IP cores allow designers to concentrate on the unique portions of their design while using
pre-designed blocks to implement standard functions such as bus interfaces, standard communication interfaces,
and memory controllers.
Through the use of advanced technology and innovative architecture the ispXPGA FPGA devices provide design-
ers with excellent speed performance. Although design dependent, many typical designs can run at over 150MHz.
Certain designs can run at over 300MHz. Table 2 details the performance of several building blocks commonly
used by logic designers.
Table 2. ispXPGA Speed Performance for Typical Building Blocks
8:1 Asynch MUX
1:32 Asynch Demultiplexer
8 x 8 2-LL Pipelined Multiplier
32-bit Up/Down Counter
32-bit Shift Register
150 MHz
125 MHz
225 MHz
290 MHz
360 MHz

Features February 2010 Includes High- Performanc e, Low-Cost “E-Series” ispXPGA® F amily Data Sheet DS1026 DISSECLOENCTTI NDUEEVIDCES  Non-volatile, Infinite ly Reconfigurable • Instant-on - Powe rs up in microseconds via • Micropro cessor configuration interface • Prog ram E2CMOS while operating from SRAM o n-chip E2CMOS® based memory • No ext ernal configuration memory  Eight s ysCLOCK™ Phase Locked Loops (PLLs) fo r Clock Management • Excellent desig n security, no bit stream to intercept • True PLL technology • Reconfigu re SRAM based logic in milliseconds 10MHz to 320MHz operation  High L ogic Density for System-level • Cloc k multiplication and division Integrat ion • Phase adjustment • 139K to 1.25M functional gates • Shift clock s in 250ps steps • 160 to 496 I/O 1.8V, 2.5V, and 3.3V VCC operation sysIO™ for High System Performance • High speed memory support through SSTL and • Up to 414Kb sysMEM™ embedded memory HSTL  High Performance Programmable Function • Advanced bus.
Keywords ISPXPGA200E, datasheet, pdf, Lattice Semiconductor, eXpanded, Programmable, Logic, Device, SPXPGA200E, PXPGA200E, XPGA200E, ISPXPGA200, ISPXPGA20, ISPXPGA2, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute

@ 2014 :: :: Semiconductors datasheet search & download site (Privacy Policy & Contact)