T599 Capacitor Datasheet

T599 Datasheet PDF, Equivalent


Part Number

T599

Description

Organic Capacitor

Manufacture

KEMET

Total Page 21 Pages
PDF Download
Download T599 Datasheet PDF


T599
KEMET Organic Capacitor (KO-CAP®) – Automotive Grade
T591, T598, & T599 High Humidity & High Temperature
Automotive Grade Polymer Electrolytic, 2.5 – 50 VDC
Overview
The KEMET Organic Capacitor (KO-CAP) is a solid
electrolytic capacitor with a conductive polymer cathode,
capable of delivering very low ESR and an improved
capacitance retention at high frequencies. KO-CAP
combines the low ESR of the multilayer ceramic, the high
capacitance of aluminum electrolytic and the volumetric
efficiency of tantalum into a single surface mount
package. Unlike liquid electrolyte-based capacitors,
KO-CAP has a very long operational life and a high ripple
current capabilities.
The T591/T598/T599 High Humidity and High Temperature
Polymer Electrolytic capacitors deliver higher capacitance
and ESR stability under harsh environmental conditions.
Enhancements to the design and selected material upgrades
were introduced to deliver 500 hours (T591) or 1,000
hours (T598, T599) at 85°C/85% RH rated voltage and to
fully comply with the AEC-Q200 qualification testing with
maximum operational temperature life up to 125°C and
150°C respectively. These capacitors are manufactured in
an ISO TS 16949 certified plant and are subjected to PPAP/
PSW, as well as change control.
Benefits
• Ultra low ESR
• Full compliance with AEC–Q200 qualification test plan
(T598 125°C, T599 150°C)
• Qualification plan based on AEC–Q200 with 85°C/85% RH
load specification limited to 500 hours (T591)
• Extended endurance test qualification for T598,
up to 2,000 hours 125°C
• TS 16949 certified plant
• Subject to PPAP/PSW and change control
• Meets or exceeds EIA standard 535BAAC
• Tape & Reel standard packaging per EIA 481
• Halogen-free epoxy and RoHS compliant
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
Applications
Typical applications include decoupling and filtering in a variety of market segments, with special emphasis in automotive
applications such as infotainment, ADAS, chassis and safety, as well as powertrain, where harsh conditions, such as high
humidity and temperature, are a concern.
Environmental Compliance
RoHS compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder. Halogen-free.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
One world. One KEMET
T2073_T59X • 10/25/2019 1

T599
KEMET Organic Capacitor (KO-CAP®) – Automotive Grade
T591, T598 & T599 High Humidity & High Temperature Automotive Grade Polymer Electrolytic, 2.5 – 50 VDC
K-SIM
For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMET’s K-SIM software. KEMET
K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels.
Ordering Information
T 59X
Capacitor
Class
Series
T = Tantalum
591 = 500 Hours
load humidity
598 = AEC-Q200
qualified (125°C)
599 = AEC-Q200
qualified (150°C)
D 107 M 010 A T E025
Case Capacitance Capacitance Rated Voltage Failure Rate/ Termination
Size Code (pF) Tolerance
(VDC)
Design
Finish
ESR
Packaging
(C-Spec)
B
First two
M = ±20%
D
digits
K = ±10%
V represent
X significant
figures. Third
digit specifies
number of
zeros.
2R5 = 2.5
006 = 6.3
010 = 10
016 = 16
020 = 20
025 = 25
035 = 35
050 = 50
A = N/A
T = 100%
Tin (Sn)
Maximum
ESR in
mΩ,
025 = 25
Blank = 7" Reel
7280 = 13" Reel
Performance Characteristics
Item
Operating Temperature
Rated Capacitance Range
Capacitance Tolerance
Rated Voltage Range
DF (120 Hz)
ESR (100 kHz)
Leakage Current
Performance Characteristics
−55°C to 105°C/125°C/150°C
10 – 470 µF at 120 Hz/25°C
K Tolerance (10%), M Tolerance (20%)
2.5 – 50 V
Refer to Part Number Electrical Specification Table
Refer to Part Number Electrical Specification Table
≤ 0.1 CV (µA) at rated voltage after 5 minutes
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2073_T59X • 10/25/2019 2


Features KEMET Organic Capacitor (KO-CAP®) – A utomotive Grade T591, T598, & T599 High Humidity & High Temperature Automotive Grade Polymer Electrolytic, 2.5 – 50 VDC Overview The KEMET Organic Capaci tor (KO-CAP) is a solid electrolytic ca pacitor with a conductive polymer catho de, capable of delivering very low ESR and an improved capacitance retention a t high frequencies. KO-CAP combines the low ESR of the multilayer ceramic, the high capacitance of aluminum electroly tic and the volumetric efficiency of ta ntalum into a single surface mount pack age. Unlike liquid electrolyte-based ca pacitors, KO-CAP has a very long operat ional life and a high ripple current ca pabilities. The T591/T598/T599 High Hu midity and High Temperature Polymer Ele ctrolytic capacitors deliver higher cap acitance and ESR stability under harsh environmental conditions. Enhancements to the design and selected material upg rades were introduced to deliver 500 ho urs (T591) or 1,000 hours (T598, T599) at 85°C/85% RH rated voltage .
Keywords T599, datasheet, pdf, KEMET, Organic, Capacitor, 599, 99, 9, T59, T5, T, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)