|
|
HAC60A150 Mount Datasheet |
|
|
| Part Number | HAC60A150 |
| Description | Panel Mount |
| Manufacture | Crydom |
| Total Page | 7 Pages |
| PDF Download |
DatasPahneleMeoutnt
HAC Series
• Load Voltage range 24 to 660 VAC
• Output rating up to 150 Arms
• Zero Voltage or Instantaneous Turn-on options
• AC or DC input control options
• Locking Input Connector
• Optional Transient Protection & installed Thermal Pad
PRODUCT SELECTION
Control Voltage
3-32 VDC
90-140 VAC
150-270 VAC
AVAILABLE OPTIONS
Series
HAC
150 A
HAC24D150 ,HAC60D150
HAC24B150 ,HAC60B150
HAC24A150 ,HAC60A150
Control Voltage
A: 150-270 VAC
B: 90-140 VAC
D: 4-32 VDC
Overvoltage Protection
Blank: Not Included
P: Included (6)
Switching Type
Blank: Zero Voltage Turn-On
-10: Instantaneous Turn-On (5)
24 A 150 P H -10
Operating Voltage
24: 24-280 VAC
60: 48-660 VAC
Rated Load Current
150: 150 Amps
Thermal Pad
Blank: Not Included
H: Included
Required for valid part number
For options only and not required for valid part number
OUTPUT SPECIFICATIONS (1)
Description
Operating Voltage (47-63Hz) [Vrms]
Transient Overvoltage [Vpk]
Maximum Off-State Leakage Current @ Rated Voltage [mA]
Maximum Off-State dv/dt @ Maximum Rated Voltage [V/µSec]
Maximum Load Current [Arms](2)
Minimum Load Current [Arms]
Maximum Surge Current [Apk] 1 Cycle 50/60 Hz
Maximum I²t for fusing (10msec)/(8.33msec)[A²sec]
Maximum On-State Voltage Drop @ Rated Current [Vrms]
Thermal Resistance Juncti on to Case (Rjc) [°C/W]
Minimum Power Factor (with Maximum load)
Wire Size max (solid/stranded) [AWG/ IEC mm²] (3)
Output Terminal Nut Torque Range [in lb (Nm)
HP Rating UL 508/IEC60957 [HP (KW)]: 240 VAC
HP Rating UL 508/IEC60947 [HP (KW)]: 480 VAC
HAC24x150
24-280
600
1
500
150
0.15
1670/1750
13950/12709
1.15
0.15
0.5
2/0 / 67.4
225-300 (25.4-33.9)
10 (7.5)
N/A
HAC60x150
48-660
1200
1
500
150
0.15
1670/1750
13950/12709
1.15
0.15
0.5
2/0 / 67.4
225-300 (25.4-33.9)
N/A
25 (18.75)
Do not forget to visit us at: www.crydom.com
Copyright © 2016 Crydom Inc. Specifications subject to change without notice.
|
DatasPahneleMeoutnt
INPUT SPECIFICATIONS (1)
Description
Control Voltage Range
Minimum Turn-Off Voltage
Must Turn-Off Voltage
Minimum Input Current (for on-state) [mA]
Maximum Input Current [mA]
Nominal Input Impedance [Ohms]
Maximum Turn-On Time [msec] (4)
Maximum Turn-Off Time [msec]
HACxxD150
4-32 VDC (10)
4 VDC
1 VDC
9
15
Current Regulated
½ Cycle
½ Cycle
HACxxA150
150-270 VAC
150 VAC
10 VAC
6
10
Current Regulated
20
30
GENERAL SPECIFICATIONS (1)
Description
Dielectric Strength, Input/Output (50/60Hz)
Dielectric Strength, Input/Output/Base (50/60Hz)
Minimum Insulation Resistance (@ 500 V DC)
Maximum Capacitance, Input/Output
Ambient Operating Temperature Range
Ambient Storage Temperature Range
Weight (typical) lbs/grams
Housing Material
SSR Mounting Torque Range [in lbs/Nm]
LED Input Status Indicator (color)
Humidity
Input Terminal (7)
GENERAL NOTES
(1) All parameters at 25°C unless otherwise specified.
(2) Heat sinking required, see derating curves.
(3) TRM3/0 lug terminal must be used.
(4) Turn-on time for Instantaneous turn-on versions is 0.02 msec.
(5) Instantaneous turn-on version is not recommended for capacitive loads. Use zero turn-on only.
(6) Output will self-trigger (450-600Vpk for HAC24 and 900-1200Vpk for HAC60), not suitable for capacitive loads.
(7) Connector/Plug Not included. See Suggested Mating Connectors/Plugs
(8) Elective Overvoltage Protection, “P” option.
(9) Load can be wired to either SSR output terminal 1 or 2.
(10) Increase minimum voltage by 1V for operations from -20 to -30°C
Parameters
3750 Vrms
2500 Vrms
109 Ohm
10 pF
-30 to 80 °C
-40 to 125 °C
0.75/340.2
PBT 30% GF, UL 94 V-0
18-20 (2-2.2)
YES (Green)
85% non-condensing
Detachable barrier strip
HACxxB150
90-140 VAC
90 VAC
10 VAC
7
12
Current Regulated
20
30
WIRING DIAGRAM
AC
V
L2 ( )
Load
L1 ( )
LOAD SIDE
L2
L1
SOLID STATE CONTACTOR
HAC60D150
INPUT 4-32 VDC
STATUS
Input Current vs Input Voltage
Standard Regulated “DC” Inputs
25
20
15
10
5
0
0 5 10 15 20 25 30
DC Input Voltage
(- / )
(+ / )
Do not forget to visit us at: www.crydom.com
Copyright © 2016 Crydom Inc. Specifications subject to change without notice.
|
| Features | DatasPahneleMeoutnt HAC Series • Load Voltage range 24 to 660 VAC • Output rating up to 150 Arms • Zero Voltage or Instantaneous Turn-on options • AC or DC input control options • Lockin g Input Connector • Optional Transien t Protection & installed Thermal Pad P RODUCT SELECTION Control Voltage 3-32 V DC 90-140 VAC 150-270 VAC AVAILABLE OPT IONS Series HAC 150 A HAC24D150 ,HAC60 D150 HAC24B150 ,HAC60B150 HAC24A150 ,HA C60A150 Control Voltage A: 150-270 VAC B: 90-140 VAC D: 4-32 VDC Overvoltage Protection Blank: Not Included P: Incl uded (6) Switching Type Blank: Zero Vo ltage Turn-On -10: Instantaneous Turn-O n (5) 24 A 150 P H -10 Operating Volt age 24: 24-280 VAC 60: 48-660 VAC Rate d Load Current 150: 150 Amps Thermal P ad Blank: Not Included H: Included Req uired for valid part number For options only and not required for valid part n umber OUTPUT SPECIFICATIONS (1) Descrip tion Operating Voltage (47-63Hz) [Vrms] Transient Overvoltage [Vpk] Maximum Off-State Leakage Current @ Rated Volt. |
| Keywords | HAC60A150, datasheet, pdf, Crydom, Panel, Mount, AC60A150, C60A150, 60A150, HAC60A15, HAC60A1, HAC60A, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute |
|
|
| @ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact) |