MSP430FG6625 Microcontrollers Datasheet

MSP430FG6625 Datasheet PDF, Equivalent


Part Number

MSP430FG6625

Description

Mixed-Signal Microcontrollers

Manufacture

etcTI

Total Page 30 Pages
PDF Download
Download MSP430FG6625 Datasheet PDF


MSP430FG6625
Product
Folder
Order
Now
Technical
Documents
Tools &
Software
Support &
Community
MSP430FG6626, MSP430FG6625
MSP430FG6426, MSP430FG6425
SLAS874A – MAY 2015 – REVISED SEPTEMBER 2018
MSP430FG662x, MSP430FG642x Mixed-Signal Microcontrollers
1 Device Overview
1.1 Features
1
• Low Supply Voltage Range:
3.6 V Down to 1.8 V
• Ultra-Low Power Consumption
– Active Mode (AM):
All System Clocks Active:
250 µA/MHz at 8 MHz, 3.0 V, Flash Program
Execution (Typical)
– Standby Mode (LPM3):
Watchdog With Crystal, and Supply Supervisor
Operational, Full RAM Retention, Fast Wakeup:
3.2 µA at 2.2 V, 3.4 µA at 3.0 V (Typical)
– Shutdown RTC Mode (LPM3.5):
Shutdown Mode, Active Real-Time Clock With
Crystal:
0.9 µA at 3.0 V (Typical)
– Shutdown Mode (LPM4.5):
0.2 µA at 3.0 V (Typical)
• Wake up From Standby Mode in 3 µs (Typical)
• 16-Bit RISC Architecture, Extended Memory, up to
20-MHz System Clock
• Flexible Power-Management System
– Fully Integrated LDO With Programmable
Regulated Core Supply Voltage
– Supply Voltage Supervision, Monitoring, and
Brownout
• Unified Clock System
– FLL Control Loop for Frequency Stabilization
– Low-Power Low-Frequency Internal Clock
Source (VLO)
– Low-Frequency Trimmed Internal Reference
Source (REFO)
– 32-kHz Crystals (XT1)
– High-Frequency Crystals up to 32 MHz (XT2)
• Four 16-Bit Timers With 3, 5, or 7
Capture/Compare Registers
1.2 Applications
• Analog Sensor Systems
• Digital Sensor Systems
• Hand-Held Meters
• Two Universal Serial Communication Interfaces
– USCI_A0 and USCI_A1 Each Support
– Enhanced UART With Automatic Baud-Rate
Detection
– IrDA Encoder and Decoder
– Synchronous SPI
– USCI_B0 and USCI_B1 Each Support
– I2C
– Synchronous SPI
• Full-Speed Universal Serial Bus (USB)
– Integrated USB-PHY
– Integrated 3.3-V and 1.8-V USB Power System
– Integrated USB-PLL
– Eight Input and Eight Output Endpoints
• Continuous-Time Sigma-Delta 16-Bit Analog-to-
Digital Converter (ADC) With Internal Reference
With 10 External Analog Inputs, 6 Single-Ended
and 4 Selectable as Differential or Single-Ended
• Dual Low-Power Operational Amplifiers
• Quad Low-Impedance Ground Switches
• Dual 12-Bit Digital-to-Analog Converters (DACs)
With Synchronization
• Voltage Comparator
• Integrated LCD Driver With Contrast Control for up
to 160 Segments
• Hardware Multiplier Supports 32-Bit Operations
• Serial Onboard Programming, No External
Programming Voltage Needed
• Six-Channel Internal DMA
• Real-Time Clock (RTC) Module With Supply
Voltage Backup Switch
Device Comparison Summarizes Family Members
• Medical Diagnostic Meters
• Hand-Held Industrial Testers
• Measurement Equipment
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.

MSP430FG6625
MSP430FG6626, MSP430FG6625
MSP430FG6426, MSP430FG6425
SLAS874A – MAY 2015 – REVISED SEPTEMBER 2018
www.ti.com
1.3 Description
The TI MSP family of ultra-low-power microcontrollers consists of several devices featuring different sets
of peripherals targeted for various applications. The architecture, combined with five low-power modes, is
optimized to achieve extended battery life in portable measurement applications. The device features a
powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code
efficiency. The digitally controlled oscillator (DCO) allows the device to wake up from low-power modes to
active mode in 3 µs (typical).
The MSP430FG6626 and MSP430FG6625 are microcontrollers with a high-performance 16-bit analog-to-
digital converter (ADC), dual 12-bit digital-to-analog converters (DACs), dual operational amplifiers, a
comparator, two universal serial communication interfaces (USCIs), USB 2.0, a hardware multiplier, DMA,
four 16-bit timers, a real-time clock (RTC) module with alarm capabilities, an LCD driver, and up to 73 I/O
pins.
The MSP430FG6426 and MSP430FG6425 are microcontrollers with a high-performance 16-bit ADC, dual
12-bit DACs, dual low-power operational amplifiers, a comparator, two USCIs, a 3.3-V LDO, a hardware
multiplier, DMA, four 16-bit timers, an RTC module with alarm capabilities, an LCD driver, and up to 73 I/O
pins.
Typical applications for these devices include analog and digital sensor systems, hand-held meters, such
as medical diagnostic meters, measurement equipment, and hand-held industrial testers.
For complete module descriptions, see the MSP430F5xx and MSP430F6xx Family User's Guide.
PART NUMBER
Device Information(1)
PACKAGE
BODY SIZE(2)
MSP430FG6626IPZ
PZ (100)
14 mm × 14 mm
MSP430FG6626IZQW
ZQW (113)
7 mm × 7 mm
(1) For the most current part, package, and ordering information for all available devices, see the Package
Option Addendum in Section 9, or see the TI website at www.ti.com.
(2) The sizes shown here are approximations. For the package dimensions with tolerances, see the
Mechanical Data in Section 9.
2 Device Overview
Copyright © 2015–2018, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: MSP430FG6626 MSP430FG6625 MSP430FG6426 MSP430FG6425


Features Product Folder Order Now Technical Doc uments Tools & Software Support & Com munity MSP430FG6626, MSP430FG6625 MSP4 30FG6426, MSP430FG6425 SLAS874A – MAY 2015 – REVISED SEPTEMBER 2018 MSP430 FG662x, MSP430FG642x Mixed-Signal Micro controllers 1 Device Overview 1.1 Fea tures 1 • Low Supply Voltage Range: 3 .6 V Down to 1.8 V • Ultra-Low Power Consumption – Active Mode (AM): All S ystem Clocks Active: 250 µA/MHz at 8 M Hz, 3.0 V, Flash Program Execution (Typ ical) – Standby Mode (LPM3): Watchdog With Crystal, and Supply Supervisor Op erational, Full RAM Retention, Fast Wak eup: 3.2 µA at 2.2 V, 3.4 µA at 3.0 V (Typical) – Shutdown RTC Mode (LPM3. 5): Shutdown Mode, Active Real-Time Clo ck With Crystal: 0.9 µA at 3.0 V (Typi cal) – Shutdown Mode (LPM4.5): 0.2 µ A at 3.0 V (Typical) • Wake up From S tandby Mode in 3 µs (Typical) • 16-B it RISC Architecture, Extended Memory, up to 20-MHz System Clock • Flexible Power-Management System – Fully Integrated LDO With Programmable Regulated Core Supply Volt.
Keywords MSP430FG6625, datasheet, pdf, etcTI, Mixed-Signal, Microcontrollers, SP430FG6625, P430FG6625, 430FG6625, MSP430FG662, MSP430FG66, MSP430FG6, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)