TEN40-2411E Converter Datasheet

TEN40-2411E Datasheet PDF, Equivalent


Part Number

TEN40-2411E

Description

DC/DC Converter

Manufacture

TRACO

Total Page 4 Pages
Datasheet
Download TEN40-2411E Datasheet


TEN40-2411E
DC/DC Converter
TEN 40E Series, 40 Watt
Developed to maximize quality in a cost
efficient design
Excellent temperature capabilities
2” x 1” metal package (6-side shielded)
Wide 2:1 input voltage range:
9-18, 18-36, 36-75 VDC
Minimal heat development due to high
efficiencies up to 93%
Operating temperature range -40 to
+85°C
1600 VDC I/O-isolation
Remote On/Off and Trim function
Protection against short circuit,
overvoltage and overtemperature
3-year product warranty
UL 62368-1 IEC 62368-1
The TEN 40E is rounding out Traco Power’s existing 40 Watt product range.
Driven by current market trends this series was developed to maximize quality
and cost efficiency in one product. Due to a new design approach the TEN 40E
thus offers a cost efficient solution with not only no concession on quality or re-
liability but even improved specifications compared to its predecessor. It comes
in a standard 2” x 1” metal package with a 2:1 input voltage range. High effi-
ciencies of up to 93% allow for an operating temperature range (natural con-
vection) of -40 to +70°C without power derating (model dependent). Certified
according to the latest IT standard (IEC/EN/UL 62368-1) and equipped with
additional features like remote on/off function and protection against short cir-
cuit, overvoltage and over temperature the TEN 40E series is suitable for many
industrial applications.
Models
Order Code
TEN 40-1210E
TEN 40-1211E
TEN 40-1212E
TEN 40-1213E
TEN 40-1215E
TEN 40-1222E
TEN 40-1223E
TEN 40-1225E
TEN 40-2410E
TEN 40-2411E
TEN 40-2412E
TEN 40-2413E
TEN 40-2415E
TEN 40-2422E
TEN 40-2423E
TEN 40-2425E
TEN 40-4810E
TEN 40-4811E
TEN 40-4812E
TEN 40-4813E
TEN 40-4815E
TEN 40-4822E
TEN 40-4823E
TEN 40-4825E
Input Voltage
Range
9 - 18 VDC
(12 VDC nom.)
18 - 36 VDC
(24 VDC nom.)
36 - 75 VDC
(48 VDC nom.)
Output 1
Vnom
Imax
3.3 VDC
12'200 mA
5 VDC
8'000 mA
12 VDC
3'333 mA
15 VDC
2'666 mA
24 VDC
1'666 mA
+12 VDC
1'666 mA
+15 VDC
1'333 mA
+24 VDC
833 mA
3.3 VDC
12'200 mA
5 VDC
8'000 mA
12 VDC
3'333 mA
15 VDC
2'666 mA
24 VDC
1'666 mA
+12 VDC
1'666 mA
+15 VDC
1'333 mA
+24 VDC
833 mA
3.3 VDC
12'200 mA
5 VDC
8'000 mA
12 VDC
3'333 mA
15 VDC
2'666 mA
24 VDC
1'666 mA
+12 VDC
1'666 mA
+15 VDC
1'333 mA
+24 VDC
833 mA
Output 2
Vnom
Imax
–12 VDC
–15 VDC
–24 VDC
1'666 mA
1'333 mA
833 mA
–12 VDC
–15 VDC
–24 VDC
1'666 mA
1'333 mA
833 mA
–12 VDC
–15 VDC
–24 VDC
1'666 mA
1'333 mA
833 mA
Efficiency
typ.
89 %
90 %
91 %
91 %
90 %
90 %
90 %
91 %
90 %
92 %
92 %
93 %
91 %
91 %
91 %
91 %
90 %
91 %
92 %
92 %
92 %
91 %
91 %
92 %
www.tracopower.com
October 16, 2019
Page 1 / 4

TEN40-2411E
TEN 40E Series, 40 Watt
Options
TEN-HS1
- Heat-sink with clamps
on demand
- Models with factory assembled heat-sink
(backorder with MOQ
non stocking item) - Models with inverse remote control
Input Specifications
Input Current
- At no load
Surge Voltage
Under Voltage Lockout
Recommended Input Fuse
Input Filter
12 Vin models: 20 mA typ.
24 Vin models: 15 mA typ.
48 Vin models: 10 mA typ.
12 Vin models: 25 VDC max. (1 s max.)
24 Vin models: 50 VDC max. (1 s max.)
48 Vin models: 100 VDC max. (1 s max.)
12 Vin models: 7 VDC min. / 8 VDC typ. / 8.8 VDC max.
24 Vin models: 15 VDC min. / 16 VDC typ. / 17.5 VDC max.
48 Vin models: 32 VDC min. / 33 VDC typ. / 35 VDC max.
12 Vin models: 8'000 mA (fast acting)
24 Vin models: 4'000 mA (slow blow)
48 Vin models: 2'000 mA (slow blow)
Internal Pi-Type
Output Specifications
Output Voltage Adjustment
Voltage Set Accuracy
Regulation
Ripple and Noise
(20 MHz Bandwidth)
- Input Variation (Vmin - Vmax)
- Load Variation (0 - 100%)
- Cross Regulation
(25% / 100% asym. load)
- single output
Capacitive Load
- dual output
- single output
- dual output
Minimum Load
Temperature Coefficient
Start-up Time
Short Circuit Protection
Output Current Limitation
–10% to +20% (By external trim resistor) (15 &
24 Vout models)
±10% (By external trim resistor) (other models)
(Single models only)
See application note: www.tracopower.com/overview/ten40e
Output power must not exceed rated power!
±1% max.
single output models: 0.2% max.
single output models: 0.3% max.
dual output models: 0.5% max. (Output 1)
0.5% max. (Output 2)
dual output models: 5% max.
3.3 Vout models: 75 mVp-p typ.
5 Vout models: 75 mVp-p typ.
12 Vout models: 100 mVp-p typ.
15 Vout models: 100 mVp-p typ.
24 Vout models: 150 mVp-p typ.
12 / -12 Vout models: 100 / 100 mVp-p typ.
15 / -15 Vout models: 100 / 100 mVp-p typ.
24 / -24 Vout models: 150 / 150 mVp-p typ.
3.3 Vout models: 22'000 µF max.
5 Vout models: 12'000 µF max.
12 Vout models: 2'000 µF max.
15 Vout models: 1'300 µF max.
24 Vout models: 490 µF max.
12 / -12 Vout models: 980 / 980 µF max.
15 / -15 Vout models: 630 / 630 µF max.
24 / -24 Vout models: 250 / 250 µF max.
Not required
±0.02 %/K max.
30 ms typ. / 60 ms max.
Continuous, Automatic recovery
150% typ. of Iout max.
All specifications valid at nominal voltage, full load and +25°C after warm-up time unless otherwise stated.
www.tracopower.com
October 16, 2019
Page 2 / 4


Features DC/DC Converter TEN 40E Series, 40 Watt • Developed to maximize quality in a cost efficient design • Excellent temperature capabilities • 2” x 1 metal package (6-side shielded) • Wide 2:1 input voltage range: 9-18, 18 -36, 36-75 VDC • Minimal heat develop ment due to high efficiencies up to 93% • Operating temperature range -40 to +85°C • 1600 VDC I/O-isolation • Remote On/Off and Trim function • Pro tection against short circuit, overvolt age and overtemperature • 3-year prod uct warranty UL 62368-1 IEC 62368-1 Th e TEN 40E is rounding out Traco Power s existing 40 Watt product range. Driv en by current market trends this series was developed to maximize quality and cost efficiency in one product. Due to a new design approach the TEN 40E thus offers a cost efficient solution with n ot only no concession on quality or rel iability but even improved specificatio ns compared to its predecessor. It come s in a standard 2” x 1” metal package with a 2:1 input voltage range. High efficiencies of.
Keywords TEN40-2411E, datasheet, pdf, TRACO, DC/DC, Converter, EN40-2411E, N40-2411E, 40-2411E, TEN40-2411, TEN40-241, TEN40-24, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)