Document
DC/DC Converter
TEN 40WIE Series, 40 Watt
• Developed to maximize quality in a cost
efficient design
• Excellent temperature capabilities
• 2” x 1” metal package (6-side shielded)
• Wide 4:1 input voltage range:
9-36, 18-75 VDC
• Minimal heat development due to high
efficiencies up to 93%
• Operating temperature range -40 to
+85°C
• 1600 VDC I/O-isolation
• Remote On/Off and Trim function
• Protection against short circuit,
overvoltage and overtemperature
• 3-year product warranty
UL 62368-1 IEC 62368-1
The TEN 40WIE is rounding out Traco Power’s existing 40 Watt product range. Driven by current market trends this series was developed to maximize quality and cost efficiency in one product. Due to a new design approach the TEN 40WIE thus offers a cost efficient solution with not only no concession on quality or reliability but even improved specifications compared to its predecessor. It comes in a standard 2” x 1” metal package with a 4:1 input voltage range. High efficiencies of up to 93% allow for an operating temperature range (natural convection) of -40 to +70°C without power derating (model dependent). Certified according to the latest IT standard (IEC/EN/UL 62368-1) and equipped with additional features like remote on/off function and protection against short circuit, overvoltage and over temperature the TEN 40WIE series is suitable for many industrial applications.
Models
Order Code
TEN 40-2410WIE TEN 40-2411WIE TEN 40-2412WIE TEN 40-2413WIE TEN 40-2415WIE TEN 40-2422WIE TEN 40-2423WIE TEN 40-2425WIE TEN 40-4810WIE TEN 40-4811WIE TEN 40-4812WIE TEN 40-4813WIE TEN 40-4815WIE TEN 40-4822WIE TEN 40-4823WIE TEN 40-4825WIE
Input Voltage Range
9 - 36 VDC (24 VDC nom.)
18 - 75 VDC (48 VDC nom.)
Output 1
Vnom
Imax
3.3 VDC
12'200 mA
5 VDC
8'000 mA
12 VDC
3'333 mA
15 VDC
2'666 mA
24 VDC
1'666 mA
+12 VDC
1'666 mA
+15 VDC
1'333 mA
+24 VDC
833 mA
3.3 VDC 5 VDC
12'200 mA 8'000 mA
12 VDC
3'333 mA
15 VDC
2'666 mA
24 VDC
1'666 mA
+12 VDC
1'666 mA
+15 VDC
1'333 mA
+24 VDC
833 mA
Output 2
Vnom
Imax
–12 VDC –15 VDC –24 VDC
1'666 mA 1'333 mA 833 mA
–12 VDC –15 VDC –24 VDC
1'666 mA 1'333 mA 833 mA
Efficiency typ. 90 % 92 % 92 % 93 % 91 % 91 % 91 % 91 % 90 % 91 % 92 % 92 % 92 % 91 % 91 % 92 %
Options
TEN-HS1
- Optional Heat Sink with Height = 0.22 inch: www.tracopower.com/products/ten-hs1.pdf
TEN-HS8
- Optional Heat Sink with Height = 0.3 inch: www.tracopower.com/products/ten-hs8.pdf
- Optional Heat Sink with Height = 0.8 inch: www.tracopower.com/products/ten-hs10.pdf
on demand
- Optional Heat Sink with Height = 0.5 inch: www.tracopower.com/products/ten-hs9.pdf
(backorder with MOQ
non stocking item) - Optional models with factory assembled heat-sink
- Optional models with inverse remote control
www.tracopower.com
November 30, 2022
Page 1 / 5
TEN 40WIE Series, 40 Watt
Input Specifications
Input Current
- At no load
Surge Voltage
Under Voltage Lockout
Recommended Input Fuse
Input Filter
24 Vin models: 15 mA typ. 48 Vin models: 10 mA typ. 24 Vin models: 50 VDC max. (1 s max.) 48 Vin models: 100 VDC max. (1 s max.) 24 Vin models: 7 VDC min. / 8 VDC typ. / 8.8 VDC max. 48 Vin models: 15 VDC min. / 16 VDC typ. / 17.5 VDC max. 24 Vin models: 8'000 mA (fast acting) 48 Vin models: 4'000 mA (slow blow)
(The need of an external fuse has to be assessed in the final application.) Internal Pi-Type
Output Specifications
Output Voltage Adjustment
Voltage Set Accuracy Regulation
Ripple and Noise (20 MHz Bandwidth)
- Input Variation (Vmin - Vmax)
- Load Variation (0 - 100%)
- Cross Regulation (25% / 100% asym. load)
- single output
Capacitive Load
- dual output - single output
- dual output
Minimum Load Temperature Coefficient Start-up Time Short Circuit Protection Output Current Limitation Overvoltage Protection
Transient Response
- Response Time
–10% to +20% (15 & 24 Vout models) ±10% (other models) (Single models only) (By external trim resistor) See application note: www.tracopower.com/overview/ten40wie Output power must not exceed rated power! ±1% max.
single output models: 0.2% max. dual output models: 0.2% max.
single output models: 0.3% max. dual output models: 0.5% max. (Output 1) 0.5% max. (Output 2) dual output models: 5% max.
3.3 Vout models: 75 mVp-p typ. 5 Vout models: 75 mVp-p typ.
12 Vout models: 100 mVp-p typ. 15 Vout models: 100 mVp-p typ. 24 Vout models: 150 mVp-p typ. 12 / -12 Vout models: 100 / 100 mVp-p typ. 15 / -15 Vout models: 100 / 100 mVp-p typ. 24 / -24 Vout models: 150 / 150 mVp-p typ. 3.3 Vout models: 22'000 µF max.
5 Vout models: 12'000 µF max. 12 Vout models: 2'000 µF max. 15 Vout models: 1'300 µF max. 24 Vout models: 490 µF max. 12 / -12 Vout models: 980 / 980 µF max. 15 / -15 Vout models: 630 / 630 µF max. 24 / -24 Vout models: 250 / 250 µF max.
Not required
±0.02 %/K max.
30 ms typ. / 60 ms max.
Continuous, Automatic recovery
150% typ. of Iout max.
125% typ. of Vout nom..