Dual Link LVDS Repeater
THC63LVD1027_Rev.4.00_E
THC63LVD1027
Dual Link LVDS Repeater
General Descrip...
Description
THC63LVD1027_Rev.4.00_E
THC63LVD1027
Dual Link LVDS Repeater
General Description
The THC63LVD1027 LVDS(Low Voltage Differential Signaling) repeater is designed to support pixel data transmission between Host and Flat Panel Display up to WUXGA resolution. THC63LVD1027 receives the dual link LVDS data streams and transmits the LVDS data through various line rate conversion modes, Dual Link Input / Dual Link Output, Single Link Input / Dual Link Output, and Dual Link Input / Single Link Output.
Features
30bits/pixel dual link LVDS Receiver 30bits/pixel dual Link LVDS Transmitter Operating Temperature Range : -40ºC~85ºC Wide LVDS input skew margin: ± 480ps at 75MHz Accurate LVDS output timing: ± 250ps at 75MHz Reduced swing LVDS output mode supported to
suppress the system EMI
Various line rate conversion modes supported
Dual link input / Dual link output [clkout=1x clkin] Single link input / Dual link output [clkout=1/2x clkin] Dual link input / Single link output [clkout=2x clkin]
Distribution (signal duplication) mode supported Power down mode supported 3.3V single voltage power supply No external components required for PLLs 64pin TSSOP with Exposed PAD (0.5mm lead pitch)
Block Diagram
Figure 1. Block Diagram
Copyright©2015 THine Electronics, Inc.
1
THine Electronics, Inc. Security E
THC63LVD1027_Rev.4.00_E Pin Diagram
Figure 2. Pin Diagram
Copyright©2015 ...
Similar Datasheet