ASSR-1410

ASSR-1410, ASSR-1411 and ASSR-1420 General-Purpose, Form A, Solid State Relay (Photo MOSFET) (60V/0.6A/1Ω) Data Sheet Description The Broadcom® ASSR-14XX Series consists of an AlGaAs infrared light-emitting diode (LED) input stage optically coupled to a high-voltage output detector circuit. The detector consists of a high-speed photovoltaic diode array and driver circuitry to switch on/off two discrete high-voltage MOSFETs. The relay turns on (contact closes) with a minimum input current of 3 mA through the input LED. The relay turns off (contact opens) with an input voltage of 0.8V or less. The single-channel configurations, ASSR-1410 and ASSR1411, are equivalent to 1 Form A Electromechanical Relays (EMR), and the dual-channel configuration, ASSR-1420, is equivalent to 2 Form A EMR. They are available in 4-pin SO, 6-pin DIP, 8-pin DIP and Gull Wing Surface Mount for DIP packages. Their electrical and switching characteristics are specified over the temperature range of –40°C to +85°C. They are used for general-purpose switching of signals and low-power AC/DC loads. ASSR-1411 enables AC/DC and DC-only output connections. For DC-only connection, the output current, IO, increases to 1.2A and the on-resistance, R(ON) reduces to 0.5Ω. CAUTION! It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. Features  Compact solid-state bidirectional signal switch  Single and du...