APA2107LSECK-J4-PRV Lamp Datasheet

APA2107LSECK-J4-PRV Datasheet PDF, Equivalent


Part Number

APA2107LSECK-J4-PRV

Description

Right Angle Surface LED Lamp

Manufacture

Kingbright

Total Page 4 Pages
Datasheet
Download APA2107LSECK-J4-PRV Datasheet


APA2107LSECK-J4-PRV
APA2107LSECK/J4-PRV
2.1 x 0.6 mm Right Angle Surface LED Lamp
DESCRIPTIONS
The Orange source color devices are made with
AlGaInP Light Emitting Diode.
Electrostatic discharge and power surge could
damage the LEDs
It is recommended to use a wrist band or
anti-electrostatic glove when handling the LEDs
All devices, equipments and machineries must be
electrically grounded
FEATURES
2.1 x 1.0 x 0.6 mm right angle SMD LED, 0.6 mm thickness
Low power consumption
Wide viewing angle
Ideal for backlight and indicator
Package: 2000 pcs / reel
Moisture sensitivity level: 3
Tinned pads for improved solderability
RoHS compliant
APPLICATIONS
Backlight
Status indicator
Home and smart appliances
Wearable and portable devices
Healthcare applications
ATTENTION
Observe precautions for handling
electrostatic discharge sensitive devices
PACKAGE DIMENSIONS
RECOMMENDED SOLDERING PATTERN
(units : mm; tolerance : ± 0.1)
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to
change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SELECTION GUIDE
Part Number
Emitting Color
(Material)
Lens Type
APA2107LSECK/J4-PRV
Super Bright Orange
(AlGaInP)
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous flux: +/-15%.
* Luminous intensity value is traceable to CIE127-2007 standards.
Water Clear
© 2017 Kingbright. All Rights Reserved. Spec No: DSAN8376 / 1203014434 Rev No: V.3A Date: 07/15/2017
Iv (mcd) @ 2mA [2]
Min.
Typ.
80 150
*20 *40
Viewing Angle [1]
2θ1/2
140°
Page 1 / 4

APA2107LSECK-J4-PRV
ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C
Parameter
Symbol
Emitting Color
Wavelength at Peak Emission IF = 2mA
Dominant Wavelength IF = 2mA
Spectral Bandwidth at 50% Φ REL MAX
IF = 2mA
Capacitance
λpeak
λdom [1]
Δλ
C
Super Bright Orange
Super Bright Orange
Super Bright Orange
Super Bright Orange
Min.
-
-
-
-
Forward Voltage IF = 2mA
VF [2]
Super Bright Orange
1.5
Reverse Current (VR = 5V)
IR
Super Bright Orange
-
Notes:
1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd : ±1nm. )
2. Forward voltage: ±0.1V.
3. Wavelength value is traceable to CIE127-2007 standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.
APA2107LSECK/J4-PRV
Value
Typ.
611
605
17
27
1.8
-
Max.
-
-
-
-
2.1
10
Unit
nm
nm
nm
pF
V
uA
ABSOLUTE MAXIMUM RATINGS at TA=25°C
Parameter
Symbol
Value
Power Dissipation
PD 84
Reverse Voltage
VR 5
Junction Temperature
Tj
115
Operating Temperature
Top -40 to +85
Storage Temperature
Tstg -40 to +85
DC Forward Current
Peak Forward Current
IF
IFM [1]
30
150
Electrostatic Discharge Threshold (HBM)
-
3000
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
© 2017 Kingbright. All Rights Reserved. Spec No: DSAN8376 / 1203014434 Rev No: V.3A Date: 07/15/2017
Unit
mW
V
°C
°C
°C
mA
mA
V
Page 2 / 4


Features APA2107LSECK/J4-PRV 2.1 x 0.6 mm Right A ngle Surface LED Lamp DESCRIPTIONS The Orange source color devices are made w ith AlGaInP Light Emitting Diode. Elect rostatic discharge and power surge coul d damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All device s, equipments and machineries must be e lectrically grounded FEATURES 2.1 x 1.0 x 0.6 mm right angle SMD LED, 0.6 mm t hickness Low power consumption Wide vie wing angle Ideal for backlight and indi cator Package: 2000 pcs / reel Moisture sensitivity level: 3 Tinned pads for i mproved solderability RoHS compliant AP PLICATIONS Backlight Status indicator H ome and smart appliances Wearable and p ortable devices Healthcare applications ATTENTION Observe precautions for hand ling electrostatic discharge sensitive devices PACKAGE DIMENSIONS RECOMMENDED SOLDERING PATTERN (units : mm; toleran ce : ± 0.1) Notes: 1. All dimensions a re in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless .
Keywords APA2107LSECK-J4-PRV, datasheet, pdf, Kingbright, Right, Angle, Surface, LED, Lamp, PA2107LSECK-J4-PRV, A2107LSECK-J4-PRV, 2107LSECK-J4-PRV, APA2107LSECK-J4-PR, APA2107LSECK-J4-P, APA2107LSECK-J4-, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)