DatasheetsPDF.com

TES2-0511H Dataheets PDF



Part Number TES2-0511H
Manufacturers TRACO
Logo TRACO
Description DC/DC Converter
Datasheet TES2-0511H DatasheetTES2-0511H Datasheet (PDF)

DC/DC Converter TES 2H Series, 2 Watt • I/O isolation voltage 1'500 VDC • Unregulated device • Single and dual output models • Input voltage 5, 12 and 24 VDC • High efficiency up to 80% • Operating Temperature range -40 to +90°C • High accuracy of pin co-planarity • Qualified for leadfree reflow solder process according IPC/JEDEC J-STD-020E • Available in tape and reel package • 3-year product warranty Models Order Code TES 2-0510H TES 2-0511H TES 2-0512H TES 2-0521H TES 2-0522H TES 2-0523H T.

  TES2-0511H   TES2-0511H


Document
DC/DC Converter TES 2H Series, 2 Watt • I/O isolation voltage 1'500 VDC • Unregulated device • Single and dual output models • Input voltage 5, 12 and 24 VDC • High efficiency up to 80% • Operating Temperature range -40 to +90°C • High accuracy of pin co-planarity • Qualified for leadfree reflow solder process according IPC/JEDEC J-STD-020E • Available in tape and reel package • 3-year product warranty Models Order Code TES 2-0510H TES 2-0511H TES 2-0512H TES 2-0521H TES 2-0522H TES 2-0523H TES 2-1210H TES 2-1211H TES 2-1212H TES 2-1222H TES 2-1223H TES 2-2410H TES 2-2411H TES 2-2412H TES 2-2422H TES 2-2423H Input Voltage Range 4.5 - 5.5 VDC (5 VDC nom.) 10.8 - 13.2 VDC (12 VDC nom.) 21.6 - 26.4 VDC (24 VDC nom.) With their small footprint these 2 Watt DC/DC converters are an ideal and economical solution for many applications where an isolated voltage is required. Typical applications are ground loop elimination, noise reduction, voltage isolation in digital interfaces and voltage conversion in distributed power systems. With a new package design these converters are qualified for the higher temperatures requested by lead-free reflow solder processes. For automated SMD production lines the devices can be supplied in standard tape and reel package. Output 1 Vnom Imax 3.3 VDC 500 mA 5 VDC 400 mA 12 VDC 165 mA +5 VDC 200 mA +12 VDC 83 mA +15 VDC 66 mA 3.3 VDC 500 mA 5 VDC 400 mA 12 VDC 165 mA +12 VDC 83 mA +15 VDC 66 mA 3.3 VDC 500 mA 5 VDC 400 mA 12 VDC 165 mA +12 VDC 83 mA +15 VDC 66 mA Output 2 Vnom Imax –5 VDC –12 VDC –15 VDC 200 mA 83 mA 66 mA –12 VDC –15 VDC 83 mA 66 mA –12 VDC –15 VDC 83 mA 66 mA Efficiency typ. 70 % 73 % 77 % 74 % 76 % 76 % 72 % 75 % 79 % 80 % 80 % 72 % 75 % 79 % 79 % 79 % www.tracopower.com November 30, 2022 Page 1 / 5 TES 2H Series, 2 Watt Input Specifications Input Current - At no load - At full load Surge Voltage Under Voltage Lockout Recommended Input Fuse Input Filter 5 Vin models: 60 mA typ. 12 Vin models: 30 mA typ. 24 Vin models: 15 mA typ. 5 Vin models: 500 mA typ. 12 Vin models: 200 mA typ. 24 Vin models: 100 mA typ. 5 Vin models: 9 VDC max. (1 s max.) 12 Vin models: 18 VDC max. (1 s max.) 24 Vin models: 30 VDC max. (1 s max.) 5 Vin models: 8 VDC typ. 12 Vin models: 16 VDC typ. 24 Vin models: 34 VDC typ. (The need of an external fuse has to be assessed in the final application.) Internal Capacitor Output Specifications Voltage Set Accuracy Regulation - Input Variation (1% Vin step) Ripple and Noise Capacitive Load - Load Variation - Voltage Balance (symmetrical load) - 20 MHz Bandwidth - single output - dual output Minimum Load Temperature Coefficient Start-up Time Short Circuit Protection ±3% max. (at 60% load, 3.3 & 5 Vout models) ±3% max. (at 100% load, other output models) single output models: 1.5% max. dual output models: 1.5% max. See application note: www.tracopower.com/overview/tes2h dual output models: 1% max. 120 mVp-p max. 3.3 Vout models: 47 µF max. 5 Vout models: 47 µF max. 12 Vout models: 10 µF max. 5 / -5 Vout models: 10 / 10 µF max. 12 / -12 Vout models: 4.7 / 4.7 µF max. 15 / -15 Vout models: 4.7 / 4.7 µF max. 2 % of Iout max. (Operation at lower load will not damage the converter, but it may not meet all specifications) ±0.02 %/K max. 50 ms max. Limited 0.5 s max., Automatic recovery EMC Specifications EMI Emissions - Conducted Emissions - Radiated Emissions EN 55032 class A (with external filter) EN 55032 class A (with external filter) External filter proposal: www.tracopower.com/overview/tes2h General Specifications Relative Humidity Temperature Ranges - Operating Temperature - Case Temperature - Storage Temperature Power Derating - High Temperature Cooling System Switching Frequency Insulation System 95% max. (non condensing) –40°C to +90°C +105°C max. –50°C to +125°C 4 %/K above 80°C See application note: www.tracopower.com/overview/tes2h Natural convection (20 LFM) 50 - 120 kHz (PFM) 100 kHz typ. (PFM) Functional Insulation All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com November 30, 2022 Page 2 / 5 Isolation Test Voltage Isolation Resistance Isolation Capacitance - Input to Output, 60 s - Input to Output, 1 s - Input to Output, 500 VDC - Input to Output, 100 kHz, 1 V Reliability Moisture Sensitivity (MSL) Washing Process Housing Material Pin Material Pin Foundation Plating Pin Surface Plating Housing Type Mounting Type Connection Type Footprint Type - Calculated MTBF Soldering Profile Weight - single output - dual output Environmental Compliance - REACH Declaration - RoHS Declaration Supporting Documents Overview Link (for additional Documents) TES 2H Series, 2 Watt 1'500 VDC 1'800 VDC 10'000 MΩ min. 60 pF typ. 100 pF max. 2'000'000 h (MIL-HDBK-217F, ground benign) Level 2 (J-STD-033C) Not allowed (vent-.


TES2-0510H TES2-0511H TES2-0512H


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)