TES2-0512H Converter Datasheet

TES2-0512H Datasheet PDF, Equivalent


Part Number

TES2-0512H

Description

DC/DC Converter

Manufacture

TRACO

Total Page 4 Pages
Datasheet
Download TES2-0512H Datasheet


TES2-0512H
DC/DC Converter
TES 2H Series, 2 Watt
Small SMD package with standard
footprint
I/O isolatoin voltage 1500 VDC
Unregulated device
Single and dual output models
Input voltage 5, 12 and 24 VDC
High efficiency up to 80%
Operating Temperature range
-40 to +85°C
High accuracy of pin co-planarity
Qualified for leadfree reflow solder
process according IPC/JEDEC
J-STD-020D
Available in tape and reel package
3-year product warranty
With their small footprint these 2 Watt DC/DC converters are an ideal
and economical solution for many applications where an isolated volt-
age is required. Typical applications are ground loop elimination, noise
reduction, voltage isolation in digital interfaces and voltage conversion
in distributed power systems. With a new package design these con-
verters are qualified for the higher temperatures requested by lead-
free reflow solder processes. For automated SMD production lines the
devices can be supplied in standard tape and reel package.
Models
Order code
TES 2-0510H
TES 2-0511H
TES 2-0512H
TES 2-0521H
TES 2-0522H
TES 2-0523H
ModTeElSs 2-1210H
TES 2-1211H
TES 2-1212H
TES 2-1222H
TES 2-1223H
TES 2-2410H
TES 2-2411H
TES 2-2412H
TES 2-2422H
TES 2-2423H
Input voltage
5 VDC ±10%
(5 VDC nominal)
12 VDC ±10%
(12 VDC nominal)
24 VDC ±10%
(24 VDC nominal)
Output voltage
3.3 VDC
5.0 VDC
12 VDC
±5 VDC
±12 VDC
±15 VDC
3.3 VDC
5.0 VDC
12 VDC
±12 VDC
±15 VDC
3.3 VDC
5.0 VDC
12 VDC
±12 VDC
±15 VDC
Output current max.
500 mA
400 mA
165 mA
±200 mA
±83 mA
±66 mA
500 mA
400 mA
165 mA
±83 mA
±66 mA
500 mA
400 mA
165 mA
±83 mA
±66 mA
Efficiency typ.
70 %
73 %
77 %
74 %
76 %
76 %
72 %
75 %
79 %
80 %
80 %
72 %
75 %
79 %
79 %
79 %
http://www.tracopower.com
Page 1 of 4

TES2-0512H
TES 2H Series, 2 Watt
Input Specifications
Input current no load / full load
5 Vin; 3.3 VDC model: 60 mA / 470 mA typ.
5 Vin; other models: 60 mA / 540 mA typ.
12 Vin; 3.3 VDC model: 30 mA / 190 mA typ.
12 Vin; other models: 30 mA / 210 mA typ.
24 Vin; 3.3 VDC model: 15 mA / 95 mA typ.
24 Vin; other models: 15 mA / 110 mA typ.
Surge voltage (1 sec. max.)
5 Vin models: 9 V max.
12 Vin models: 18 V max.
24 Vin models: 30 V max.
Under voltage shut down
12 Vin models: 8 VDC typ.
24 Vin models: 16 VDC typ.
48 Vin models: 34 VDC typ.
Reverse voltage protection 0.3 A max.
Input filter internal capacitor
Output Specifications
Voltage set accuracy see graphs below
Voltage balance (dual output models, balanced load) 1 % max.
Regulation
– Input variation 1.2 % / 1 % change Vin
– Load variation 0 – 100 %
see graphs below
Minimum load not required
Ripple and noise (20 MHz Bandwidth) 120 mVp-p max.
Temperature coefficient ±0.02 %/K typ.
Short circuit protection limited 0.5s max.
Capacitive load
3.3 & 5.0 VDC models: 47 µF max.
12 & ±5 VDC models: 10 µF max.
±12 & ±15 VDC models: 4.7 µF max.
General Specifications
Temperature ranges
– Operating (convection cooling 20LFM, 0,1m/s) –40°C to +85°C
– Case temperature +95°C max.
– Storage temperature –40°C to +125°C
Derating (convection cooling) 4 %/K above 75°C
Humidity (non condensing) 95 % rel H max.
Reliability, calculated MTBF (MIL-HDBK-217F at +25°C, ground benign) >2‘000‘000 h
Isolation voltage (60 sec.) 1’500 VDC
Isolation capacitance (100 kHz, 1V) 60 pF typ.
Isolation resistance (500 VDC) >10 Gohm
Switching frequency 50 to 120 kHz typ. (depend on load)
Physical Specifications
Casing material plastic (UL94V-0 rated)
Weight
single output models: 1.5 g (0.05 oz)
dual output models: 2.2 g (0.08 oz)
Lead-free reflow solder process as per J-STD-020BD.1 (www.jedec.org)
Moisture sensivity level (MSL) level 2 as per J-STD-033B.1 (to find at:
www.jedec.org - free registration required)
Washing process not recommended. Product non-hermetical
Environmental compliance – Reach www.tracopower.com/products/reach-declaration.pdf
– RoHS RoHS directive 2011/65/EU
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 2 of 4


Features DC/DC Converter TES 2H Series, 2 Watt • Small SMD package with standard footprint • I/O isolatoin voltage 1 500 VDC • Unregulated device • Si ngle and dual output models • Input voltage 5, 12 and 24 VDC • High effi ciency up to 80% • Operating Tempera ture range -40 to +85°C • High ac curacy of pin co-planarity • Qualifi ed for leadfree reflow solder process according IPC/JEDEC J-STD-020D • A vailable in tape and reel package • 3-year product warranty With their sma ll footprint these 2 Watt DC/DC convert ers are an ideal and economical solutio n for many applications where an isolat ed voltage is required. Typical applica tions are ground loop elimination, nois e reduction, voltage isolation in digit al interfaces and voltage conversion in distributed power systems. With a new package design these converters are qua lified for the higher temperatures requ ested by leadfree reflow solder process es. For automated SMD production lines the devices can be supplied in standard tape an.
Keywords TES2-0512H, datasheet, pdf, TRACO, DC/DC, Converter, ES2-0512H, S2-0512H, 2-0512H, TES2-0512, TES2-051, TES2-05, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)