TSM0509S Converters Datasheet

TSM0509S Datasheet PDF, Equivalent


Part Number

TSM0509S

Description

DC/DC Converters

Manufacture

TRACO

Total Page 5 Pages
PDF Download
Download TSM0509S Datasheet PDF


TSM0509S
DC/DC Converters
TSM Series, 1 Watt
Features
SMD package (SOIC-14/18)
Construction in lead frame technology
Isolated single and dual output
I/O isolation 1‘000 VDC
High efficiency
Operating temperature –40°C to +85°C
Reflow solder temperature up to 245°C
High accuracy of Pin co-planarity
Available in tape and reel package
Lead free design, RoHS compliant
3-year product warranty
The TSM series are isolated DC/DC converters with 1W output power implemented
in a molded plastic package with a pin accuracy suitable for automated SMD-
production. The devices can be soldered without any problems in a high tempera-
ture lead free solder process. With their small footprint these converters are the
economical solution for point of load power conversion, ground loop elimination,
noise reduction and digital interface applications.
Models
Ordercode
TSM 0505S
TSM 0509S
TSM 0512S
TSM 0515S
TSM 0505D
TSM 0512D
TSM 0515D
TSM 1205S
TSM 1209S
TSM 1212S
TSM 1215S
TSM 1205D
TSM 1212D
TSM 1215D
TSM 2405S
TSM 2409S
TSM 2412S
TSM 2415S
TSM 2405D
TSM 2412D
TSM 2415D
Input voltage
5 VDC ±10%
12 VDC ±10%
24 VDC ±10%
http://www.tracopower.com
Output voltage
5 VDC
9 VDC
12 VDC
15 VDC
±5 VDC
±12 VDC
±15 VDC
5 VDC
9 VDC
12 VDC
15 VDC
±5 VDC
±12 VDC
±15 VDC
5 VDC
9 VDC
12 VDC
15 VDC
±5 VDC
±12 VDC
±15 VDC
Output current max.
200 mA
110 mA
80 mA
65 mA
±100 mA
±40 mA
±30 mA
200 mA
110 mA
80 mA
65 mA
±100 mA
±40 mA
±30 mA
200 mA
110 mA
80 mA
65 mA
±100 mA
±40 mA
±30 mA
Efficiency typ.
80 %
78 %
80 %
81 %
75 %
79 %
79 %
81 %
78 %
81 %
82 %
75 %
80 %
80 %
81 %
78 %
81 %
82 %
75 %
80 %
80 %
Page 1 of 5

TSM0509S
DC/DC Converters
TSM Series
1 Watt
Input Specifications
Input current no load / full load
5 Vin models: 30 mA / 260 mA typ.
12 Vin models: 15 mA / 110 mA typ.
24 Vin models: 8 mA / 55 mA typ.
Surge voltage (1 sec. max.)
5 Vin models: 9 V max.
12 Vin models: 18 V max.
24 Vin models: 30 V max.
Reverse voltage protection 0.3 A max.
Reflected input ripple current can be reduced by ext. 1–2.2 µF polyester film
capacitor
Input filter internal capacitors
Output Specifications
Voltage set accuracy ±3 %
Voltage balance (dual output models) ±1 % max.
Regulation
– Input variation 1.2 % / 1 % change Vin
– Load variation 20 – 100 % 10 % max.
Ripple and noise (20 MHz Bandwidth) 120 mVpk-pk max.
Temperature coefficient ±0.02 %/°C
Short circuit protection limited 1 sec. max.
Capacitive load
single output models: 22 µF max.
dual output models: 10 µF max.
General Specifications
Temperature ranges
– Operating (see also enclosed derating curve) –40°C to +85°C (no derating)
– Storage –55°C to +125°C
Humidity (non condensing) 95 % rel H max.
Reliability, calculated MTBF (MIL-HDBK-217F, at+25°C, ground benign) >2’000’000 h
Isolation voltage (60 sec.) – Input/Output 1‘000 VDC
Isolation capacity
– Input/Output 40 pF typ.
Isolation resistance
– Input/Output >1‘000 Mohm
Switching frequency 100 kHz typ. (frequency modulation)
Frequency change over line and load ±30 %
Environmental compliance – Reach www.tracopower.com/products/reach-declaration.pdf
– RoHS RoHS directive 2011/65/EU
Physical Specifications
Casing material epoxy molding compound
(flammability to UL 94V-0 rated)
Package weight
single output models: 1.5 g (0.053 oz), 1.8 g (0.064 oz) for 24 Vin
dual output models: 1.8 g (0.064 oz), 2.2 g (0.078 oz) for 24 Vin
Moisture sensitivity level 3
Reflow soldering profile (IPC/JEDEC J-STD-020D) peak temp. 245°C (10 sec. max.)
217°C for 90 sec. max. Convection reflow
solder process is recommended
Packaging www.tracopower.com/overview/tsm
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 2 of 5


Features DC/DC Converters TSM Series, 1 Watt Fea tures ◆ SMD package (SOIC-14/18) ◆ Construction in lead frame technology ◆ Isolated single and dual output I/O isolation 1‘000 VDC ◆ High efficiency ◆ Operating temperature –40°C to +85°C ◆ Reflow solder t emperature up to 245°C ◆ High accur acy of Pin co-planarity ◆ Available in tape and reel package ◆ Lead free design, RoHS compliant ◆ 3-year pro duct warranty The TSM series are isola ted DC/DC converters with 1W output pow er implemented in a molded plastic pack age with a pin accuracy suitable for au tomated SMDproduction. The devices can be soldered without any problems in a h igh temperature lead free solder proces s. With their small footprint these con verters are the economical solution for point of load power conversion, ground loop elimination, noise reduction and digital interface applications. Models Ordercode TSM 0505S TSM 0509S TSM 051 2S TSM 0515S TSM 0505D TSM 0512D TSM 0515D TSM 1205S TSM 1209S TSM 1212S TSM 1215S TSM 1205D.
Keywords TSM0509S, datasheet, pdf, TRACO, DC/DC, Converters, SM0509S, M0509S, 0509S, TSM0509, TSM050, TSM05, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)