O3HF Oscillator Datasheet

O3HF Datasheet PDF, Equivalent


Part Number

O3HF

Description

SMD Oscillator

Manufacture

Fox Electronics

Total Page 2 Pages
Datasheet
Download O3HF Datasheet


O3HF
3.2x2.5mm 32.768 kHz SMD Oscillator O3HF
(former F32K Series)
DATASHEET
HCMOS Output
Stability of -170 ~ +10 PPM
Temperature Range of -40ºC to +85ºC
ELECTRICAL CHARACTERISTICS
PARAMETERS
MAX (unless otherwise noted)
Frequency Range (FO)
Temperature Range
Operating (TOPR)
Storage
(TSTG)
Frequency Tolerance @ 25ºC
32.768kHz
-40 ~ +85°C
-55 ~ +125°C
+5 ± 20 PPM
Frequency Stability, ref. 25°C
-170 ~ +10PPM
Supply Voltage (VDD)
3.3V±10% (Std.)
1.5V~5.5V (Usable)
Input Current (IDD) (no load)
Output Symmetry (50% VDD)
Rise/Fall Time (TR/TF)
(20%/80% VDD Levels)
Output Voltage (VOL)
(VOH)
Output Load
(HCMOS)
1.5 uA
40% ~ 60%
200 nS
0.4V Max
VDD – 0.4V Min
15 pF
Start-up Time (TS)
(VDD) = 1.5 ~ 5.5V, Ta = -40°C ~ +85°C
Maximum Soldering Temp / Time
1 Second
260°C / 10 Seconds
Moisture Sensitivity Level (MSL)
1
Termination Finish
Au over Ni
Seal Method
Seam Seal
Lead (Pb) Free
Yes
ROHS/REACH Compliant
Yes
ENABLE / DISABLE FUNCTION
Pin1 Output (pin 3)
OPEN 1
Active
‘1’ Level VIH 80%VDD
‘0’ Level VIL 20%VDD
Active
High Z
1 An internal pull-up resistor from pin 1 to pin 4 allows active output if pin 1 is left open
3.2 ± 0.1
#4 #3
2.5 ± 0.1
#1 #2
1.0 Max
1.2
#1 #2
1.0
#4 #3 0.75
1.0
Recommended
Solder Pad Layout
1.3
1.1
#1
0.8
1.0
All dimensions are in millimeters.
Pin Connections
#1 E/D
#3 Output
#2 GND
#4 VDD
Notes:
*A 0.01μF capacitor should be placed between VDD (Pin 4) and GND (Pin2) to minimize power supply line noise.
*Dimensional drawing is for reference to critical specifications defined by size measurements.
Certain non-critical visual attributes, such as side castellations, reference pin shape, etc. may vary
© Copyright 2019 Fox Electronics. All rights reserved
Title / Description: O3HF SERIES STANDARD SPECIFICATIONS
Drawing Number: 100565
Size: A
Part Number:
Cage: 61429
Draftsperson: MAJ
Approved: BEC
Revision Date: 4/11/2019
Page 1 of 2

O3HF
3.2x2.5mm 32.768 kHz SMD Oscillator O3HF
(former F32K Series)
DATASHEET
A
Ф1.5
Tape Specifications (millimeters)
BCDE F
Reel Qty.
Options
4.0 4.0 3.5 8.0 1.4 -T3 = 3,000*
*default
-T1 = 1,000
Reel Specifications (millimeters)
GH I J K L
2.5 Ф13 Ф22 Ф60 Ф178 8.0
M
1.6
Available Options & Part Identification
Example: F O3HF C Y M 0.032768
F O3HF C Y M 0.032768
Fox
Model Number
Voltage
Stability
Operating
Frequency (MHz)
C = 3.3V ± 10%
Y = -170 ~ +10PPM
Temperature
M = -40 to +85°C
Corporate Headquarters
5570 Enterprise Parkway
Fort Myers, FL 33905
http://www.FOXONLINE.com
Sales
1-888-GET-2-FOX (1-888-438-2369)
or
1-239-693-0099
http://www.FOXONLINE.com/repdisty
Tech Support
http://www.FOXONLINE.com/email
Product use: Fox Electronics reserves the right to modify the products and/or specifications described herein at any time and at Fox Electronics'
sole discretion. All information in this document, including descriptions of product features and performance, is subject to change without notice.
Performance specifications and the operating parameters of the described products are determined in the independent state and are not
guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or
warranty of any kind, whether express or implied, including, but not limited to, the suitability of Fox Electronics' products for any particular purpose,
an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide
and does not convey any license under intellectual property rights of Fox Electronics or any third parties.
Fox Electronics' products are not intended for use in applications involving extreme environmental conditions or in life support systems or
similar devices where the failure or malfunction of a Fox Electronics product can be reasonably expected to significantly affect the health or
safety of users. Anyone using a Fox Electronics product in such a manner does so at their own risk, absent an express, written agreement by
Fox Electronics.
Fox Electronics and the Fox logo are registered trademarks of Fox Electronics. Product specification is subject to change without notice.
Other trademarks and service marks used herein, including protected names, logos and designs, are the property of Fox Electronics or their
respective third party owners.
© Copyright 2019 Fox Electronics. All rights reserved
Title / Description: O3HF SERIES STANDARD SPECIFICATIONS
Drawing Number: 100565
Size: A
Part Number:
Cage: 61429
Draftsperson: MAJ
Approved: BEC
Revision Date: 4/11/2019
Page 2 of 2


Features 3.2x2.5mm 32.768 kHz SMD Oscillator O3HF (former F32K Series) DATASHEET • HC MOS Output • Stability of -170 ~ +10 PPM • Temperature Range of -40ºC to +85ºC ELECTRICAL CHARACTERISTICS PAR AMETERS MAX (unless otherwise noted) Frequency Range (FO) Temperature Range Operating (TOPR) Storage (TSTG) Fr equency Tolerance @ 25ºC 32.768kHz -4 0 ~ +85°C -55 ~ +125°C +5 ± 20 PPM Frequency Stability, ref. 25°C -170 ~ +10PPM Supply Voltage (VDD) 3.3V±10 % (Std.) 1.5V~5.5V (Usable) Input Curr ent (IDD) (no load) Output Symmetry (5 0% VDD) Rise/Fall Time (TR/TF) (20%/8 0% VDD Levels) Output Voltage (VOL) ( VOH) Output Load (HCMOS) 1.5 uA 40% ~ 60% 200 nS 0.4V Max VDD – 0.4V Min 15 pF Start-up Time (TS) (VDD) = 1.5 ~ 5.5V, Ta = -40°C ~ +85°C Maximum Sol dering Temp / Time 1 Second 260°C / 1 0 Seconds Moisture Sensitivity Level ( MSL) 1 Termination Finish Au over Ni Seal Method Seam Seal Lead (Pb) Fre e Yes ROHS/REACH Compliant Yes ENABLE / DISABLE FUNCTION Pin1 Output (pin 3) .
Keywords O3HF, datasheet, pdf, Fox Electronics, SMD, Oscillator, 3HF, HF, F, O3H, O3, O, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)