DG309 Switches Datasheet

DG309 Datasheet PDF, Equivalent


Part Number

DG309

Description

Quad / SPST Analog Switches

Manufacture

Maxim Integrated

Total Page 4 Pages
PDF Download
Download DG309 Datasheet PDF


DG309
19-3926; Rev 0; 3/91
Quad, SPST Analog Switches
_______________General Description
The DG308A/DG309 are quad, single-pole-single-throw
(SPST) analog switches. The DG308A is normally open
(SPST, NO), while the DG309 is normally closed (SPST,
NC). Both parts feature fast switching speeds and low on-
resistance over the analog range. Other features include a
turn-on time under 120ns, a turn-off time under 90ns, and a
channel on-resistance of 60. CMOS inputs provide
reduced input loading and very low leakage currents.
Both parts feature a 44V maximum breakdown voltage rat-
ing that allows 30V peak-to-peak switch-off blocking
capacity. The DG308A/DG309 can be used with split sup-
plies (±5V to ±20V) or a single positive supply (+5V to
+30V), while retaining CMOS-logic-compatible inputs.
________________________Applications
Sample-and-Hold Circuits
Test Equipment
Communications Systems
PBX, PABX
Guidance and Control Systems
Heads-Up Displays
Military Radios
__________Typical Operating Circuit
____________________________Features
o 60rDS(ON)
o Single/Bipolar-Supply Operation
o CMOS Logic Compatible
o Monolithic, Low-Power CMOS Design
______________Ordering Information
PART
TEMP. RANGE PIN-PACKAGE
DG308ACJ
0°C to +70°C
16 Plastic DIP
DG308ACY
0°C to +70°C
16 Narrow SO
DG308ACK
0°C to +70°C
16 CERDIP
DG308AC/D
0°C to +70°C
Dice*
DG308ADJ
-40°C to +85°C
16 Plastic DIP
DG308ADY
-40°C to +85°C
16 Narrow SO
DG308ADK
-40°C to +85°C
16 CERDIP
DG308AAK
-55°C to +125°C 16 CERDIP**
DG309CJ
0°C to +70°C
16 Plastic DIP
DG309CY
0°C to +70°C
16 Narrow SO
DG309CK
0°C to +70°C
16 CERDIP
DG309C/D
0°C to +70°C
Dice*
DG309DJ
-40°C to +85°C
16 Plastic DIP
DG309DY
-40°C to +85°C
16 Narrow SO
DG309DK
-40°C to +85°C
16 CERDIP
DG309AK
-55°C to +125°C 16 CERDIP**
* Contact factory for dice specifications.
** Contact factory for availability and processing to MIL-STD-883.
______Pin Configuration/Truth Table
VIN ±10V 5k * 1
2
3
-15V 4
5
10k 6
7
*8
DG308A
DG309
16 * 40k
15
14
13 +15V
12
11 20k
10
9*
5k
VOUT
PROGRAMMABLE-GAIN AMPLIFIER
* PINS 1, 8, 9, AND 16 ARE LOGIC-CONTROL INPUTS.
TOP VIEW
IN1 1
D1 2
S1 3
V- 4
GND 5
S4 6
D4 7
IN4 8
LOGIC
0
1
DG308A
DG309
16 IN2
15 D2
14 S2
13 V+ (SUBSTRATE)
12 N.C.
11 S3
10 D3
9 IN3
DIP/SO
TRUTH TABLE
DG308A
OFF
ON
DG309
ON
OFF
________________________________________________________________ Maxim Integrated Products 1
For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800

DG309
Quad, SPST Analog Switches
ABSOLUTE MAXIMUM RATINGS
Voltage Referenced to V-
V+ ....................................................................................+44V
GND .................................................................................+25V
Digital Inputs VS, VD................(V- - 2V) to (V+ + 2V) or 20mA,
whichever occurs first
Current into Any Terminal (except S or D) ..........................30mA
Continuous Current (S or D)................................................20mA
Peak Current (S or D)
(pulsed at 1ms, 10% duty cycle max) ............................70mA
Continuous Power Dissipation (TA = +70°C) (Note 1)
Plastic DIP (derate 10.53mW/°C above +70°C)............842mW
Narrow SO (derate 8.70mW/°C above +70°C) .............696mW
CERDIP (derate 10.00mW/°C above +70°C) ................800mW
Operating Temperature Ranges
DG308AC_/DG309C_ .........................................0°C to +70°C
DG308AD_/DG309D_ ......................................-40°C to +85°C
DG308AAK/DG309AK ...................................-55°C to +125°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10sec) .............................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(V+ = 15V, V- = -15V, TA = TMIN to TMAX, unless otherwise noted.) (Note 2)
PARAMETER SYMBOL
CONDITIONS
SWITCH
Analog Signal Range VANALOG
Drain-Source
On-Resistance
rDS(ON)
VIN = 11V (DG308A),
VIN = 3.5V (DG309),
IS = 1mA,
VD = 10V or -10V
Source-Off
Leakage Current
IS(OFF)
VIN = 3.5V (DG308A),
VIN = 11V (DG309),
VS = 14V, VD = -14V
VIN = 3.5V (DG308A),
VIN = 11V (DG309),
VS = -14V, VD = 14V
Drain-Off
Leakage Current
ID(OFF)
VIN = 3.5V (DG308A),
VIN = 11V (DG309),
VS = 14V, VD = -14V
VIN = 3.5V (DG308A),
VIN = 11V (DG309),
VS = -14V, VD = 14V
Drain-On
Leakage Current
ID(ON)
VIN =11V (DG308A),
VIN = 3.5V (DG309),
VS = VD = +14V
VIN = 11V (DG308A),
VIN = 3.5V (DG309),
VS = VD = -14V
INPUT
Input Current with
Input Voltage High
IINH VIN = 15V
Input Current with
Input Voltage Low
IINL VIN = 0V
TA = +25°C
TA = +25°C,
TMIN
TA = TMAX
TA = +25°C
TA = TMAX
TA = +25°C
TA = TMAX
TA = +25°C
TA = TMAX
TA = +25°C
TA = TMAX
TA = +25°C
TA = TMAX
TA = +25°C
TA = TMAX
TA = +25°C,
TMAX
TA = +25°C,
TMAX
DG30_AK
MIN TYP MAX
-15 15
60 100
95 150
-1 0.1 1
-100
100
-1 -0.1 1
-100
100
-1 0.1 1
-100
100
-1 0.1 1
-100
100
-2 0.1 2
-200
200
-2 0.1 2
-200
200
-1 0.001 1
-1 -0.001 1
DG30_C/D
MIN TYP MAX
UNITS
-15 15
60 100
80 125
-5 0.1
-100
-5 0.1
-100
-5 0.1
-100
-5 0.1
-100
-5 0.1
-200
-5 0.1
-200
5
100
5
100
5
100
5
100
5
200
5
200
V
nA
nA
nA
-1 0.001 1
-1 0.001 1
µA
µA
2 _______________________________________________________________________________________


Features 19-3926; Rev 0; 3/91 Quad, SPST Analog Switches DG308A/DG309 _______________ General Description The DG308A/DG309 ar e quad, single-pole-single-throw (SPST) analog switches. The DG308A is normall y open (SPST, NO), while the DG309 is n ormally closed (SPST, NC). Both parts f eature fast switching speeds and low on resistance over the analog range. Other features include a turn-on time under 120ns, a turn-off time under 90ns, and a channel on-resistance of 60Ω. CMOS inputs provide reduced input loading an d very low leakage currents. Both parts feature a 44V maximum breakdown voltag e rating that allows 30V peak-to-peak s witch-off blocking capacity. The DG308A /DG309 can be used with split supplies (±5V to ±20V) or a single positive su pply (+5V to +30V), while retaining CMO S-logic-compatible inputs. ____________ ____________Applications Sample-and-Hol d Circuits Test Equipment Communication s Systems PBX, PABX Guidance and Contro l Systems Heads-Up Displays Military Radios __________Typical Opera.
Keywords DG309, datasheet, pdf, Maxim Integrated, Quad, /, SPST, Analog, Switches, G309, 309, 09, DG30, DG3, DG, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)