|
|
SP5003 Filter Datasheet |
|
|
| Part Number | SP5003 |
| Description | 4 Channel Common Mode Filter |
| Manufacture | Littelfuse |
| Total Page | 4 Pages |
| Datasheet |
TVS Diode Array (SPA®Diodes)
General Purpose ESD Protection - SP5003 Series
SP5003 Series 4ChannelCommonModeFilter
RoHS Pb GREEN
Description
The SP5003 Series is a highly integrated Common Mode
Filter (CMF) providing both ESD protection and EMI
common mode noise filtering for systems using high
speed differential serial interfaces, such as MIPI D-PHY or
HDMI.
The SP5003 Series can protect and filter two differential
line pairs in a small RoHS-compliant TDFN-10 package, with
cost and space savings over discrete solutions.
Pinout
In 1+ 1
In 1- 2
G ND 3
In 2+ 4
In 2- 5
1 0 Out 1+
9 Out 1-
8 G ND
7 Out 2+
6 Out 2-
Note :This drawing is not to scale.
Functional Block Diagram
Pin1
External Pin2
(Connector)
Pin4
Pin5
Pin10
Pin9
Internal
(ASIC)
Pin7
Pin6
Pin3 Pin8
Features
• Large differential
bandwidth > 4.0 GHz
• High Common Mode
Stop Band Attenuation:
> 16 dB at 900 MHz
• Common Mode Imped
ance: Zc: 32Ω at 100 MHz
• TDFN-10 2.50mm ×
2.00mm × 0.75mm
package with 0.50mm
lead pitch
• ±15kV ESD protection
per channel (IEC 61000-
4-2 Level 4, contact
discharge)
• RoHS-compliant, Lead-
free packaging
• Moisture Sensitivity Level
(MSL-1)
Applications
• HDMI/DVI Display in
Mobile Phones
• MIPI D-PHY (CSI-2, DSI,
etc) in Mobile Phones and
Digital Still Cameras
© 2019 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 09/23/19
|
TVS Diode Array (SPA®Diodes)
General Purpose ESD Protection - SP5003 Series
Absolute Maximum Ratings
Symbol
Parameter
Value
Units
IDC
DC Current Per Line
100
mA
PDC
DC Package Power Rating
0.5
Watts
TOP
Operating Temperature
-40 to 125
°C
TSTOR
Storage Temperature
-55 to 150
°C
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the component. This is a stress only rating and operation of the component at these or any other conditions above those
indicated in the operational sections of this specification is not implied.
Electrical Characteristics (TOP=25ºC)
Parameter
Symbol
Test Conditions
Channel Resistance
Total Channel Capacitance
Reverse Standoff Voltage
Breakdown Voltage
Forward Voltage at IF
Reverse Leakage Current
RCH
CTOTAL
VRWM
VBR
VF
ILEAK
Pins 1−10, 2−9, 4−7 and 5−6
VI/O
=
1.65VDC
f=1MHz,
Reverse
30mVAC
Bias;
IT=1mA
IF=1mA
VLeak=+3.3V
Positive (tp=8/20µs)
Dynamic Resistance2 3
RDYN Negative (tp=8/20µs)
TLP, tp=100ns, I/O to GND
ESD Withstand Voltage1 2
Differential Mode Cutoff
Frequency2
Common Mode Impedance
Common Mode Stop Band
Attenuation2
VESD
F3dB
ZC
Fatten
IEC 61000-4-2 (Contact Discharge)
IEC 61000-4-2 (Air Discharge)
ZSOURCE=50 Ω, ZLOAD50 Ω
@100MHz
f=900MHz
Notes:
1. ESD zapping at I/O pins (1,2,4,5) with respect to GND.
2. Guaranteed by design.
3. Transmission Line Pulse (TLP) with 100ns width and 200ps rise time.
Min
6.0
0.4
±15
±30
Typ
3.5
0.8
8.0
0.7
0.01
1.36
0.6
0.42
4.0
32
16
Max
5.0
1.3
5.0
10.0
1.5
0.10
Units
Ω
pF
V
V
V
µA
Ω
kV
kV
GHz
Ω
dB
Differential Mode Attenuation vs. Frequency
0
−1
−2
−3
−4
−5
−6
−7
−8
−9
−10
1
10 100 1000
Frequency (MHz)
10000
Common Mode Attenuation vs. Frequency
0
−5
−10
−15
−20
−25
−30
−35
−40
1
10 100 1000
Frequency (MHz)
10000
© 2019 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 09/23/19
|
| Features | TVS Diode Array (SPA®Diodes) General Pu rpose ESD Protection - SP5003 Series SP 5003 Series 4ChannelCommonModeFilter R oHS Pb GREEN Description The SP5003 Se ries is a highly integrated Common Mode Filter (CMF) providing both ESD protec tion and EMI common mode noise filterin g for systems using high speed differen tial serial interfaces, such as MIPI D- PHY or HDMI. The SP5003 Series can prot ect and filter two differential line pa irs in a small RoHS-compliant TDFN-10 p ackage, with cost and space savings ove r discrete solutions. Pinout In 1+ 1 In 1- 2 G ND 3 In 2+ 4 In 2- 5 1 0 Out 1+ 9 Out 18 G ND 7 Out 2+ 6 Out 2- No te :This drawing is not to scale. Funct ional Block Diagram Pin1 External Pin2 (Connector) Pin4 Pin5 Pin10 Pin9 Inte rnal (ASIC) Pin7 Pin6 Pin3 Pin8 Featu res • Large differential bandwidth > 4.0 GHz • High Common Mode Stop Band Attenuation: > 16 dB at 900 MHz • Com mon Mode Imped ance: Zc: 32Ω at 100 MH z • TDFN-10 2.50mm × 2.00mm × 0.75mm package with 0.50mm lead pitch • . |
| Keywords | SP5003, datasheet, pdf, Littelfuse, 4, Channel, Common, Mode, Filter, P5003, 5003, 003, SP500, SP50, SP5, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute |
|
| @ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact) |