Low Noise Amplifier
Data Sheet
FEATURES
Low noise figure: 1.8 dB P1dB output power: 14.5 dBm PSAT output power: 17.5 dBm High gain: 15 dB Ou...
Description
Data Sheet
FEATURES
Low noise figure: 1.8 dB P1dB output power: 14.5 dBm PSAT output power: 17.5 dBm High gain: 15 dB Output IP3: 29 dBm Supply voltage: VDD = 7 V at 70 mA 50 Ω matched input/output (I/O) 32-lead, 5 mm × 5 mm LFCSP package: 25 mm2
APPLICATIONS
Test instrumentation High linearity microwave radios VSAT and SATCOM Military and space
GENERAL DESCRIPTION
The HMC1049LP5E is a GaAs MMIC low noise amplifier (LNA) that operates between 0.3 GHz and 20 GHz. This LNA provides 15 dB of small signal gain, 1.8 dB noise figure, and an IP3 output of 29 dBm, yet requires only 70 mA from a 7 V supply. The P1dB output power of 14.5 dBm enables the LNA to function as a local oscillator (LO) driver for balanced, I/Q, or
GaAs, pHEMT, MMIC, Low Noise Amplifier, 0.3 GHz to 20 GHz HMC1049LP5E
FUNCTIONAL BLOCK DIAGRAM
32 NC 31 NC 30 ACG1 29 NC 28 NC 27 NC 26 NC 25 NC
NC 1 VDD 2 NC 3 GND 4 RFIN 5 NC 6 NC 7 NC 8
HMC1049LP5E
24 NC 23 NC 22 GND 21 RFOUT/VDD 20 NC 19 NC 18 NC 17 NC
NC 9 NC 10 NC 11 NC 12 VGG 13 NC 14 ACG3 15 ACG2 16
16798-002
Figure 1.
image rejection mixers. VDD can also be applied to Pin 21, although Pin 21 requires a bias tee with VDD = 4 V. The HMC1049LP5E amplifier I/Os are internally matched to 50 Ω, and the device is supplied in a compact, leadless 5 mm × 5 mm LFCSP package.
Rev. B
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for an...
Similar Datasheet