Oven Controlled Crystal Oscillator
OX-502
Oven Controlled Crystal Oscillator
Options5
OX-502
Features
• 6-Pin SMD package • Fast warm-up • Frequency ...
Description
OX-502
Oven Controlled Crystal Oscillator
Options5
OX-502
Features
6-Pin SMD package Fast warm-up Frequency Range, 10 MHz to 40 MHz Standard freq: 10, 12.8, 20, 24.576, 25, 30.72 MHz High Relability (based on fully intergrated Design) Low Power
Applications
Base stations 5G & 4 G) Test equipment Small Cell Military communication equipment Stratum 3 SyncE; 1588
Performance Specifications
Parameter vs. operating temperature range (referenced to +25°C)
Frequency Stabilities1 10 to 40 MHz
Min Typical Max
Units
-20 +20 ppb -10 +10 ppb -20 +20 ppb
Condition -40 to +85°C -40 to +85°C -40 to +95°C
slope Initial tolerance vs. supply voltage change vs. load change vs. aging / day vs. aging / year vs. aging / 10 years Holdover drift
Start up time Warm-up time
Loop bandwith for wander generation compliance
-2
+2 ppb/°C
@ Temp stab. +-10ppb
-0.5 +0.5 ppm
-10 +10 ppb
-10 +10 ppb
-5
±2 +5
ppb
500
+500
ppb
-3 3 ppm
at time of shipment, nominal EFC LoVaSd±5±%5%stsattaictic
after 30 days of operation after 30 days of operation after 30 days of operation
5 ppb over 24 hours, constant temperature (<±1°C) ; after 30 days continous opperation
200 msec
3 minutes to ±20ppb of final frequency (1 hour reading) @ +25°C
3 mHz MTIE compliant with GR‐1244 Fig 5‐5 TDEV compliant with GR‐ 1244 Fig 5‐4 ;
measurement setup: oscillator stabilized 24 hours at Constant Temperature (±1°C, still air), data collected over 100,000 seconds at 1 second ...
Similar Datasheet