High-Brightness LED Drivers
EVALUATION KIT AVAILABLE
MAX16822A/MAX16822B
2MHz, High-Brightness LED Drivers with Integrated MOSFET
and High-Side Cu...
Description
EVALUATION KIT AVAILABLE
MAX16822A/MAX16822B
2MHz, High-Brightness LED Drivers with Integrated MOSFET
and High-Side Current Sense
General Description
The MAX16822A/MAX16822B step-down constant-current high-brightness LED (HB LED) drivers provide a cost-effective design solution for automotive interior/exterior lighting, architectural and ambient lighting, LED bulbs, and other LED illumination applications.
The MAX16822A/MAX16822B operate from a +6.5V to +65V input-voltage range and can provide an output current up to 350mA, if operated up to a temperature of +125°C, or up to 500mA, if operated up to a temperature of +105°C. A high-side current-sense resistor adjusts the output current and a dedicated pulse-width modulation (PWM) input enables pulsed LED dimming over a wide range of brightness levels.
These devices are well suited for applications requiring a wide input-voltage range. The high-side current sensing and an integrated current-setting circuitry minimize the number of external components while delivering an average output current with ±3% accuracy. A hysteretic control method ensures excellent input supply rejection and fast response during load transients and PWM dimming. The MAX16822A allows 10% current ripple and the MAX16822B allows 30% current ripple. Both devices operate up to a switching frequency of 2MHz, thus allowing the use of small-sized components.
The MAX16822A/MAX16822B offer an analog dimming feature that reduces the output current by applying an...
Similar Datasheet