www.vishay.com
SMP3V3 thru SMP36A
Vishay General Semiconductor
Surface Mount TRANSZORB® Transient Voltage Suppressors
eSMP® Series
SMP (DO-220AA)
Anode
Cathode
DESIGN SUPPORT TOOLS click logo to get started
Models
Available
PRIMARY CHARACTERISTICS
VBR uni-directional VWM PPPM IFSM
TJ max. Polarity
4.10 V to 44.2 V 3.3 V to 36 V 400 W 40 A 150 °C Uni-directional
Package
SMP (DO-220AA)
FEATURES
• Very low profile - typical height of 1.0 mm • Ideal for automated placement • Available in uni-directional • 400 W peak pulse power capability with a
10/1000 μs waveform • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Meets MSL level 1, per J-STD-020, LF maximum peak
of 260 °C • Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, and telecommunication.
MECHANICAL DATA Case: SMP (DO-220AA) Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS-compliant, and industrial grade Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 2 whisker test Polarity: color band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Peak pulse power dissipation with a 10/1000 μs waveform (fig. 1) (1)(2) Peak pulse current with a 10/1000 μs waveform (1) Peak forward surge current 10 ms single half sine-wave (2) Maximum instantaneous forward voltage at 25 A (3)
PPPM IPPM IFSM VF
Operating junction and storage temperature range
TJ, TSTG
Notes
(1) Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2 (2) Mounted on 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads to each terminal (3) Pulse test: 300 μs pulse width, 1 % duty cycle
VALUE 400
See table next page 40 2.5
-55 to +150
UNIT W A A V °C
Revision: 10-Aug-2018
1 Document Number: 88481
For technical questions within your region:
[email protected],
[email protected],
[email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
www.vishay.com
SMP3V3 thru SMP36A
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
DEVICE TYPE
DEVICE MARKING
CODE
BREAKDOWN
VOLTAGE VBR AT IT (1)
(V)
MIN.
MAX.
TEST
CURRENT
IT (mA)
STAND-OFF
VOLTAGE VWM (V)
MAXIMUM REVERSE LEAKAGE
AT VWM ID (μA) (3)
SMP3V3
AC 4.10 5.10 1.0 3.3 200
SMP5.0A
AE 6.40 7.07 10 5.0 150
SMP6.0A
AG 6.67 7.37 10 6.0 600
SMP6.5A
AK 7.22 7.98 10 6.5 100
SMP7.0A
AM 7.78 8.60
10
7.0
50
SMP7.5A
AN 8.33 9.21 1.0
7.5
50
SMP8.0A
AR 8.89 9.83 1.0
8.0
20
SMP11A
AZ 12.2 13.5 1.0
11
1.0
SMP12A
BE 13.3 14.7 1.0
12
1.0
SMP13A
BG 14.4 15.9 1.0
13
1.0
SMP14A
BK 15.6 17.2 1.0
14
1.0
SMP15A
BM 16.7 18.5 1.0
15
1.0
SMP16A
BP 17.8 19.7 1.0
16
1.0
SMP17A
BR 18.9 20.9 1.0
17
1.0
SMP18A
BT 20.0 22.1 1.0
18
1.0
SMP20A
BV 22.2 24.5 1.0
20
1.0
SMP22A
BX 24.4 26.9 1.0
22
1.0
SMP24A
BZ 26.7 29.5 1.0
24
1.0
SMP26A
CE 28.9 31.9 1.0
26
1.0
SMP28A
CG 31.1 34.4 1.0
28
1.0
SMP30A
CK 33.3 36.8 1.0
30
1.0
SMP33A
CM 36.7 40.6 1.0
33
1.0
SMP36A
CP 40.0 44.2 1.0
36
1.0
Notes
(1) VBR measured after IT applied for 300 μs, IT = square wave pulse or equivalent (2) Surge current waveform per fig. 3 and derate per fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35
MAXIMUM PEAK PULSE
SURGE CURRENT IPPM (A) (2)
54.8 43.5 38.8 35.7 33.3 31.0 29.4 22.0 20.1 18.6 17.2 16.4 15.4 14.5 13.7 12.3 11.3 10.3 9.5 8.8 8.3 7.5 6.9
MAXIMUM CLAMPING VOLTAGE AT
IPPM VC (V)
7.3 9.2 10.3 11.2 12.0 12.9 13.6 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Typical thermal resistance, junction to lead (1)
RJL
Typical thermal resistance, junction to ambient (2)
RJA
Notes
(1) Mounted on PCB with 5.0 mm x 5.0 mm copper pad areas attached to each terminal (2) Mounted on minimum recommended pad layout
LIMIT 50 250
UNIT °C/W °C/W
ORDERING INFORMATION (Example)
PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE
SMP3V3-M3/84A
0.024
84A
SMP3V3-M3/85A
0.024
85A
SMP11A-M3/84A
0.024
84A
SMP11A-M3/85A
0.024
85A
BASE QUANTITY 3000 10 000 3000 10 000
DELIVERY MODE 7" diameter plastic tape and reel 13" diameter plastic tape and reel 7" diameter plastic tape and reel 13" diameter plastic tape and reel
Revision: 10-Aug-2018
2 Document Number: 88481
For technical questions within your region:
[email protected],
[email protected],
[email protected]
THIS DO.