UCC27527 Logic Datasheet

UCC27527 Datasheet, PDF, Equivalent


Part Number

UCC27527

Description

CMOS Input Threshold Logic

Manufacture

etcTI

Total Page 30 Pages
Datasheet
Download UCC27527 Datasheet


UCC27527
Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
UCC27527, UCC27528
SLUSBD0E – JUNE 2013 – REVISED DECEMBER 2014
UCC2752x Dual 5-A High-Speed Low-Side Gate Driver Based on
CMOS Input Threshold Logic
1 Features
1 Industry-Standard Pin Out
• Two Independent Gate-Drive Channels
• 5-A Peak Source and Sink Drive Current
• CMOS Input Logic Threshold
(Function of Supply Voltage on VDD Pins)
• Hysteretic Logic Thresholds for High Noise
Immunity
• Independent Enable Function for Each Output
• Inputs and Enable Pin Voltage Levels Not
Restricted by VDD Pin Bias Supply Voltage
• 4.5-V to 18-V Single Supply Range
• Outputs Held Low During VDD UVLO (Ensures
Glitch-Free Operation at Power Up and Power
Down)
• Fast Propagation Delays (17-ns Typical)
• Fast Rise and Fall Times (7-ns and 6-ns Typical)
• 1-ns Typical Delay Matching Between 2 Channels
• Outputs Held in Low When Inputs Floating
• SOIC-8, and 3-mm x 3-mm WSON-8 Package
Options
• Operating Temperature Range of –40°C to 140°C
• –5-V Negative Voltage Handling Capability on
Input Pins
2 Applications
• Switch-Mode Power Supplies
• DC-to-DC Converters
• Motor Control, Solar Power
• Gate Drive for Emerging Wideband Gap Power
Devices Such as GaN
3 Description
The UCC2752x family of devices are dual-channel,
high-speed, low-side gate driver devices capable of
effectively driving MOSFET and IGBT power
switches. Using a design that inherently minimizes
shoot-through current, UCC2752x can deliver high-
peak current pulses of up to 5-A source and 5-A sink
into capacitive loads along with rail-to-rail drive
capability and extremely small propagation delay
typically 17 ns. In addition, the drivers feature
matched internal propagation delays between the two
channels which are very well suited for applications
requiring dual-gate drives with critical timing, such as
synchronous rectifiers. The input pin thresholds are
based on CMOS logic, which is a function of the VDD
supply voltage. Wide hysteresis between the high and
low thresholds offers excellent noise immunity. The
Enable pins are based on TTL and CMOS compatible
logic, independent of VDD supply voltage.
Device Information(1)
PART NUMBER PACKAGE
BODY SIZE (NOM)
UCC27527
WSON (8)
SOIC (8)
3.00 mm x 3.00 mm
4.90 mm x 3.91 mm
UCC27528
WSON (8)
SOIC (8)
3.00 mm x 3.00 mm
4.90 mm x 3.91 mm
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
Dual Input Configuration
Dual Non-Inverting Inputs
INA- 1
UCC27527
8 INA+ ENA 1
UCC2752 8
8 ENB
INB- 2
GND 3
OUTB 4
7 INB+
INA 2
GND 3
6 OUTA
5 VDD
INB 4
7 OUTA
6 VDD
5 OUTB
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.

UCC27527
UCC27527, UCC27528
SLUSBD0E – JUNE 2013 – REVISED DECEMBER 2014
www.ti.com
Table of Contents
1 Features .................................................................. 1
2 Applications ........................................................... 1
3 Description ............................................................. 1
4 Revision History..................................................... 2
5 Description (continued)......................................... 4
6 Pin Configuration and Functions ......................... 4
7 Specifications......................................................... 5
7.1 Absolute Maximum Ratings ...................................... 5
7.2 Handling Ratings....................................................... 5
7.3 Recommended Operating Conditions....................... 5
7.4 Thermal Information .................................................. 6
7.5 Electrical Characteristics........................................... 6
7.6 Switching Characteristics .......................................... 7
7.7 Typical Characteristics .............................................. 8
8 Detailed Description ............................................ 11
8.1 Overview ................................................................. 11
8.2 Functional Block Diagram ....................................... 11
8.3 Feature Description................................................. 12
8.4 Device Functional Modes........................................ 17
9 Application and Implementation ........................ 18
9.1 Application Information............................................ 18
9.2 Typical Application .................................................. 18
10 Power Supply Recommendations ..................... 23
11 Layout................................................................... 23
11.1 Layout Guidelines ................................................. 23
11.2 Layout Example .................................................... 24
11.3 Thermal Considerations ........................................ 25
12 Device and Documentation Support ................. 26
12.1 Related Links ........................................................ 26
12.2 Trademarks ........................................................... 26
12.3 Electrostatic Discharge Caution ............................ 26
12.4 Glossary ................................................................ 26
13 Mechanical, Packaging, and Orderable
Information ........................................................... 26
4 Revision History
Changes from Revision D (July 2013) to Revision E
Page
• Added Handling Rating table, Feature Description section, Device Functional Modes, Application and
Implementation section, Power Supply Recommendations section, Layout section, Device and Documentation
Support section, and Mechanical, Packaging, and Orderable Information section ............................................................... 1
Changes from Revision C (June 2013) to Revision D
Page
• Added OUTA, OUTB voltage field and values. ...................................................................................................................... 5
• Changed table note from "Values are verified by characterization and are not production tested." to "Values are
verified by characterization on bench."................................................................................................................................... 5
• Changed Bias Current TYP values from 170 µA to 180 µA. .................................................................................................. 6
Changes from Revision B (January 2013) to Revision C
Page
• Changed UCC27527 packaging options ................................................................................................................................ 4
• Added UCC27527 Bias Current specifications....................................................................................................................... 6
• Added an updated Output Stage section. ............................................................................................................................ 15
• Added UCC2752X Gate Driver Output Structure image ...................................................................................................... 15
• Added updated Drive Current and Power Dissipation section. ............................................................................................ 21
• Added a PSW... equation. .................................................................................................................................................... 21
Changes from Revision A (December 2012) to Revision B
Page
• Changed Feature bullet from "-5-V Negative Voltage Handling Capability on Input and Enable Pins" to -5-V
Negative Voltage Handling Capability on Input Pins"............................................................................................................. 1
2 Submit Documentation Feedback
Copyright © 2013–2014, Texas Instruments Incorporated
Product Folder Links: UCC27527 UCC27528


Features Product Folder Sample & Buy Technical Documents Tools & Software Support & Community UCC27527, UCC27528 SLUSBD0E – JUNE 2013 – REVISED DECEMBER 2014 UCC2752x Dual 5-A High-Speed Low-Side Gate Driver Based on CMOS Input Thresho ld Logic 1 Features •1 Industry-Stan dard Pin Out • Two Independent Gate-D rive Channels • 5-A Peak Source and S ink Drive Current • CMOS Input Logic Threshold (Function of Supply Voltage o n VDD Pins) • Hysteretic Logic Thresh olds for High Noise Immunity • Indepe ndent Enable Function for Each Output Inputs and Enable Pin Voltage Levels Not Restricted by VDD Pin Bias Supply Voltage • 4.5-V to 18-V Single Supply Range • Outputs Held Low During VDD UVLO (Ensures Glitch-Free Operation at Power Up and Power Down) • Fast Propa gation Delays (17-ns Typical) • Fast Rise and Fall Times (7-ns and 6-ns Typi cal) • 1-ns Typical Delay Matching Be tween 2 Channels • Outputs Held in Lo w When Inputs Floating • SOIC-8, and 3-mm x 3-mm WSON-8 Package Options • Operating Temperatu.
Keywords UCC27527, datasheet, pdf, etcTI, CMOS, Input, Threshold, Logic, CC27527, C27527, 27527, UCC2752, UCC275, UCC27, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)