Gate Driver. UCC27524 Datasheet

UCC27524 Driver. Datasheet pdf. Equivalent

UCC27524 Datasheet
Recommendation UCC27524 Datasheet
Part UCC27524
Description Low-Side Gate Driver
Feature UCC27524; Product Folder Sample & Buy Technical Documents Tools & Software Support & Community UCC27523, .
Manufacture etcTI
Datasheet
Download UCC27524 Datasheet





Texas Instruments UCC27524
Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
UCC27523, UCC27524, UCC27525, UCC27526
SLUSAQ3G – NOVEMBER 2011 – REVISED APRIL 2015
UCC2752x Dual 5-A High-Speed, Low-Side Gate Driver
1 Features
1 Industry-Standard Pinout
• Two Independent Gate-Drive Channels
• 5-A Peak Source and Sink-Drive Current
• Independent-Enable Function for Each Output
• TTL and CMOS Compatible Logic Threshold
Independent of Supply Voltage
• Hysteretic-Logic Thresholds for High Noise
Immunity
• Inputs and Enable Pin-Voltage Levels Not
Restricted by VDD Pin Bias Supply Voltage
• 4.5-V to 18-V Single-Supply Range
• Outputs Held Low During VDD-UVLO, (Ensures
Glitch-Free Operation at Power up and Power
Down)
• Fast Propagation Delays (13-ns Typical)
• Fast Rise and Fall Times (7-ns and 6-ns Typical)
• 1-ns Typical Delay Matching Between Two
Channels
• Two Outputs are in Parallel for Higher Drive
Current
• Outputs Held Low When Inputs Floating
• PDIP (8), SOIC (8), MSOP (8) PowerPAD™ and
3-mm × 3-mm WSON-8 Package Options
• Operating Temperature Range of –40°C to 140°C
2 Applications
• Switched-Mode Power Supplies
• DC-DC Converters
• Motor Control, Solar Power
• Gate Drive for Emerging Wide Band-Gap Power
Devices such as GaN
3 Description
The UCC2752x family of devices are dual-channel,
high-speed, low-side gate-driver devices capable of
effectively driving MOSFET and IGBT power
switches. Using a design that inherently minimizes
shoot-through current, UCC2752x can deliver high-
peak current pulses of up to 5-A source and 5-A sink
into capacitive loads along with rail-to-rail drive
capability and extremely small propagation delay
(typically 13 ns). In addition, the drivers feature
matched internal propagation delays between the two
channels. These delays are very well suited for
applications requiring dual-gate drives with critical
timing, such as synchronous rectifiers. This also
enables connecting two channels in parallel to
effectively increase current-drive capability or driving
two switches in parallel with one input signal. The
input pin thresholds are based on TTL and CMOS
compatible low-voltage logic, which is fixed and
independent of the VDD supply voltage. Wide
hysteresis between the high and low thresholds offers
excellent noise immunity.
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
SOT-23 (8)
4.90 mm × 3.91 mm
UCC27523
HVSSOP (8)
WSON (8)
3.00 mm × 3.00 mm
SOT-23 (8)
4.90 mm × 3.91 mm
UCC27524
HVSSOP (8)
WSON (8)
3.00 mm × 3.00 mm
PDIP (8)
9.81 mm × 6.35 mm
SOT-23 (8)
4.90 mm × 3.91 mm
UCC27525
HVSSOP (8)
WSON (8)
3.00 mm × 3.00 mm
UCC27526
WSON (8)
3.00 mm × 3.00 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Dual Inverting Inputs
ENA 1
UCC27523
8 ENB
Pin Configuration
Dual Non-Inverting Inputs
One Inverting and One
Non-Inverting Input
ENA 1
UCC27524
8 ENB
ENA 1
UCC27525
8 ENB
Dual Input Configuration
INA- 1
UCC27526
8 INA+
INA 2
GND 3
INB 4
7 OUTA
6 VDD
5 OUTB
INA 2
GND 3
INB 4
7 OUTA
6 VDD
5 OUTB
INA 2
GND 3
INB 4
7 OUTA
6 VDD
5 OUTB
INB- 2
GND 3
OUTB 4
7 INB+
6 OUTA
5 VDD
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.



Texas Instruments UCC27524
UCC27523, UCC27524, UCC27525, UCC27526
SLUSAQ3G – NOVEMBER 2011 – REVISED APRIL 2015
www.ti.com
Table of Contents
1 Features .................................................................. 1
2 Applications ........................................................... 1
3 Description ............................................................. 1
4 Revision History..................................................... 2
5 Description (continued)......................................... 4
6 Pin Configuration and Functions ......................... 4
7 Specifications......................................................... 6
7.1 Absolute Maximum Ratings ...................................... 6
7.2 ESD Ratings.............................................................. 6
7.3 Recommended Operating Conditions....................... 6
7.4 Thermal Information .................................................. 6
7.5 Electrical Characteristics........................................... 7
7.6 Switching Characteristics .......................................... 8
7.7 Typical Characteristics .............................................. 9
8 Detailed Description ............................................ 12
8.1 Overview ................................................................. 12
8.2 Functional Block Diagrams ..................................... 12
8.3 Feature Description................................................. 13
8.4 Device Functional Modes........................................ 20
9 Application and Implementation ........................ 21
9.1 Application Information............................................ 21
9.2 Typical Application .................................................. 21
10 Power Supply Recommendations ..................... 26
11 Layout................................................................... 26
11.1 Layout Guidelines ................................................. 26
11.2 Layout Example .................................................... 27
11.3 Thermal Considerations ........................................ 27
12 Device and Documentation Support ................. 29
12.1 Related Links ........................................................ 29
12.2 Trademarks ........................................................... 29
12.3 Electrostatic Discharge Caution ............................ 29
12.4 Glossary ................................................................ 29
13 Mechanical, Packaging, and Orderable
Information ........................................................... 29
4 Revision History
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
Changes from Revision F (May, 2013) to Revision G
Page
• Added Pin Configuration and Functions section, ESD Ratings table, Feature Description section, Device Functional
Modes, Application and Implementation section, Power Supply Recommendations section, Layout section, Device
and Documentation Support section, and Mechanical, Packaging, and Orderable Information section .............................. 1
• Changed UCC2752X Gate Driver Output Structure image. ................................................................................................. 17
Changes from Revision E (June 2012) to Revision F
Page
• Added 0.5 to PSW equation in Drive Current and Power Dissipation section ....................................................................... 24
Changes from Revision D (April 2012) to Revision E
Page
• Added OUTA, OUTB voltage field and values. ...................................................................................................................... 6
• Changed table note from "Values are verified by characterization and are not production tested." to "Values are
verified by characterization on bench."................................................................................................................................... 6
• Added note, "Values are verified by characterization and are not production tested." .......................................................... 6
• Changed Switching Time tPW values from 10 ns and 25 ns to 15 ns and 25 ns ns. .............................................................. 7
• Changed Functional Block Diagrams images....................................................................................................................... 12
• Changed Slow Input Signal Figure 33.................................................................................................................................. 18
2 Submit Documentation Feedback
Copyright © 2011–2015, Texas Instruments Incorporated
Product Folder Links: UCC27523 UCC27524 UCC27525 UCC27526



Texas Instruments UCC27524
www.ti.com
UCC27523, UCC27524, UCC27525, UCC27526
SLUSAQ3G – NOVEMBER 2011 – REVISED APRIL 2015
Changes from Revision C (March 2012) to Revision D
Page
• Changed Inputs (INA, INB, INA+, INA–, INB+, INB-) section to include UCC2752X (D, DGN, DSD) information. ............... 7
• Added Inputs (INA, INB, INA+, INA-, INB+, INB-) UCC27524P ONLY section. .................................................................... 7
• Changed Enable (ENA, ENB) section to include UCC2752X (D, DGN, DSD) information.................................................... 7
• Added ENABLE (ENA, ENB) UCC27524P ONLY section. .................................................................................................... 7
Changes from Revision B ( December 2011) to Revision C
Page
• Added ROH note in the Outputs (OUTA, OUTB) section. ....................................................................................................... 7
• Added an updated Output Stage section. ............................................................................................................................ 17
• Added UCC2752X Gate Driver Output Structure image ...................................................................................................... 17
• Added an updated Low Propagation Delays and Tightly Matched Outputs section. ........................................................... 18
• Added Slow Input Signal Combined with Differences in Input Threshold Voltage image. ................................................... 18
• Added updated Drive Current and Power Dissipation section. ............................................................................................ 23
• Added a PSW... equation. .................................................................................................................................................... 24
Changes from Revision A (November 2011) to Revision B
Page
• Changed Supply start threshold row to include two temperature ranges............................................................................... 7
• Changed Minimum operating voltage after supply start min and max values from 3.6 V to 4.2 V to 3.40 V and 4.40 V. ..... 7
• Changed Supply voltage hysteresis typ value from 0.35 to 0.30. .......................................................................................... 7
• Changed UCC27526 Block Diagram drawing. ..................................................................................................................... 13
• Changed UCC27526 Channel A in Inverting and Channel B in Non-Inverting Configuration drawing. ............................... 21
Changes from Original (November 2011) to Revision A
Page
• Changed data sheet status to Production Data...................................................................................................................... 1
Copyright © 2011–2015, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: UCC27523 UCC27524 UCC27525 UCC27526
3





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)