36-V Operational Amplifiers
Product Folder
Order Now
Technical Documents
Tools & Software
Support & Community
Reference Design
OPA187, OPA2187...
Description
Product Folder
Order Now
Technical Documents
Tools & Software
Support & Community
Reference Design
OPA187, OPA2187, OPA4187
SBOS807D – DECEMBER 2016 – REVISED DECEMBER 2018
OPAx187 0.001-µV/°C Drift, Low Power, Rail-to-Rail Output 36-V Operational Amplifiers Zero-Drift Series
1 Features
1 Low Offset Voltage: 10 µV (maximum) Zero Drift: 0.001 µV/°C Low Noise: 15 nV/√Hz PSRR: 160 dB CMRR: 140 dB AOL: 160 dB Quiescent Current: 100 µA Wide Supply Voltage: ±2.25 V to ±18 V Rail-to-Rail Output Operation Input Includes Negative Rail Low Bias Current: 100 pA (typical) EMI Filtered Inputs Microsize Packages
2 Applications
Bridge Amplifier Strain Gauge Test and Measurement Equipment Transducer Application Temperature Measurement Electronic Scales Medical Instrumentation RTD Amplifier Precision Active Filters Low-Side Current Monitoring
3 Description
The OPAx187 series operational amplifiers use autozeroing techniques to simultaneously provide lowoffset voltage (1 µV), and near zero drift over time and temperature. These miniature, high-precision, low-quiescent current amplifiers offer high-input impedance and rail-to-rail output swing within 5 mV of the rails into high-impedance loads. The input common-mode range includes the negative rail. Either single or dual supplies can be used in the range of 4.5 V to 36 V (±2.25 V to ±18 V).
The single version of the OPAx187 device is available in microsize 8-pin VSSOP, 5-pin SOT-23, and 8-pin...
Similar Datasheet