2A Load Switch
TCK206G, TCK207G, TCK208G
TOSHIBA CMOS Linear Integrated Circuit Silicon Monolithic
TCK206G, TCK207G, TCK208G
0.75 V, 2A...
Description
TCK206G, TCK207G, TCK208G
TOSHIBA CMOS Linear Integrated Circuit Silicon Monolithic
TCK206G, TCK207G, TCK208G
0.75 V, 2A Load Switch IC with Reverse Current Blocking in Ultra Small Package
The TCK206G, TCK207G and TCK208G are 0.75 V ultra low voltage load switch ICs for a power management with slew rate control driver and reverse current blocking(SW OFF state) function.
Switch ON resistance is only 18.4 mΩ (typ.) at 0.75 V, -1.5 A condition and output current is available up to 2.0 A (DC). TCK207G and TCK208G feature output auto-discharge function.
These devices are available in 0.5 mm pitch ultra small package WCSP4C (0.9 mm x 0.9 mm, t: 0.5 mm (typ.)). Thus, these devices are ideal for portable applications that require high-density board assembly such as cellular phone.
Weight : 0.9 mg ( typ.)
Feature
Low input voltage operation: VIN = 0.75 to 3.6 V High output current: IOUT (DC) = 2.0 A Low ON resistance :
RON = 18.1 mΩ (typ.) at VIN = 3.3 V, -1.5 A RON = 18.2 mΩ (typ.) at VIN = 1.2 V, -1.5 A RON = 18.4 mΩ (typ.) at VIN = 0.75 V, -1.5 A Built in Slew rate control driver Built in Reverse current blocking(SW OFF state) Built in Auto-discharge (TCK207G and TCK208G) Active High and Pull down connection between CONTROL and GND (TCK206G and TCK207G) Active Low (TCK208G) Ultra small package : WCSP4C (0.9 mm x 0.9 mm, t: 0.5 mm)
WCSP4C
Pin Assignment(Top view)
VIN CONTROL (A2) (B2)
Top marking
6L: TCK206G 7L: TCK207G 8L: TCK208G
VOUT (A1)
GND (B1)
© 20...
Similar Datasheet