LSP10480LLS Module Datasheet

LSP10480LLS Datasheet, PDF, Equivalent


Part Number

LSP10480LLS

Description

Surge Protection Module

Manufacture

Littelfuse

Total Page 3 Pages
Datasheet
Download LSP10480LLS Datasheet


LSP10480LLS
LSP10 Module Series
Surge Protection Module
LED Lighting Surge Protection Module > LSP10
RoHS
Agency Approvals
Agency
Standard
UL1449
Agency File Number
E320116
Applications
• Outdoor and Commercial
LED Lighting
• Roadway lighting
• Traffic lighting
• Digital signage
• Wash wall lighting
• Parking garage/lot lighting
• Flood lighting
• Tunnel lighting
• Street lighting
Additional Information
Description
The Littelfuse LSP10 thermally protected Surge Protective
Device is a self-protected device which is specially designed
to be used in outdoor and commercial LED lighting fixtures
for transient overvoltage protection. It is constructed with
Littelfuse thermally protected varistor technology. Its built-in
thermal disconnect function provides additional protection
to prevent catastrophic failure and fire hazard even under the
extreme circumstances of varistor end-of-life or sustaining
over voltage conditions. LSP10 series connected option
allows clear indication of thermal fault protection by discon-
necting power to luminaire thereby signally SPD module
replacement. The LSP10 SPD facilitates customer’s product
compliance to IEEE C62.41.2 Location Category C High and
US Dept of Energy MSSLC Model Spec.
Features
• 20kA Maximum
Discharge Current
(Imax)m 8/20us
• Meets ANSI C82.77-5-
2015: Location C High
• Meets ANSI C136.2-
2015: Extreme Level
• Meets IEEE C62.41.2:
Location Category C High
• Meets US Dept.
of Energy MSSLC
Model Spec.
• Parallel or Series
connected options
• Thermally protected
Notes:
1. Self-declared compliance.
• IP66 rated, dust-tight
and water resistant
• IEC61643-11 Class
II/ EN61643-11 Type
2 Compliant1
• 240Vac and 277Vac parts
are available for Class I
and Class II installation
based on IEC luminaire
protection classes.
Please see details in Part
Numbering System.
• CE Mark - Meets the
requirements of Low
Voltage and RoHS
European Directives.
Datasheet
Resources
Samples
Absolute Maximum Ratings
• For ratings of individual members of a series, see Device Ratings and Specifications chart
LSP10 Series
Units
Continous
AC Voltage Range (VM(AC)RMS)
Continuous Current*
Transient
Maximum Discharge Current 8/20μs Waveform (Imax)
Nominal Discharge Current 8/20µs Waveform (In)
Operating Ambient Temperature Range (TA)
Storage Temperature Range (TSTG)
Isolation Voltage Capability (When the thermal disconnect opens)
Insulation Resistance
150 to 510
5
20,000
10,000
-45 to +85
-45 to +110
600
>1,000
V
A
A
A
°C
°C
V
Note: * = Max. continuous current for series connection.
CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in
the operational sections of this specification is not implied.
© 2019 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/03/19

LSP10480LLS
Surge Protection Module
LED Lighting Surge Protection Module > LSP10
LSP10 Series Device Ratings & Specifications
Part Number8
LSP10120*
Operating
Voltage
(VAC)
120
LSP10240*
240
LSP10277*
277
LSP10347*
347
LSP10480*
LSP10240LL*
480
L-L:240
L-N/G:120
MCOV/Uc
(VAC)6
150
Maximum
Discharge
Current
(Imax)(A)3
20,000
Nominal
Discharge
Current
(In)(A)2
10,000
275
20,000
10,000
320
20,000
10,000
420
20,000
10,000
510
L-L:275
L-N/G:150
20,000
20,000
10,000
10,000
MLV
(V)4
L-N:740
L-G:740
N-G:670
L-N:1130
L-G:1130
N-G:1060
L-N:1330
L-G:1330
N-G:1260
L-N:1750
L-G:1750
N-G:1680
L-N:2020
L-G:2020
N-G:1960
L-L:1130
L-N/G:740
Up Safety Compliance
(V)5
IEC/EN 61643-117
UL1449
900 -
X
1200
X
X
1400
X
X
1900
-
X
2100
L-L:1200
L-N/G:900
-
-
-
X
X
X
LSP10480LLP
L-L:480
L-N/G:277
L-L:510
L-N/G:320
20,000
10,000
L-L:2020
L-N/G:1330
L-L:2100
L-N/G:1400
-
-
X
X
LSP10480LLS
L-L:480
L-N/G:277
L-L:510
L-N/G:320
20,000
10,000
L-L:2030
L-N/G:1480
L-L:2100
L-N/G:1400
-
-
X
X
Notes:
1. 5A max. continuous current for series connection.
2. Nominal Discharge Current (In)(A): The nominal discharge current is a measure of the SPDs endurance capability; 15 impulses of discharge current uses the 8/20us current waveform.
3. Maximum Discharge Current (Imax)(A): The maximum discharge current is a measure of the SPDs maximum capability; single impulse of discharge current uses the 8/20us current waveform. All Devices pass maximum discharge
current with possible, safe opening of thermal disconnect.
4. MLV – UL1449 Measured limiting voltage; the highest value of residual voltage measurements during the application of impulses of 8/20us nominal discharge current (In); an average voltage value of 15 impulses.
5. Up – IEC 61643-11 Voltage protection level; the highest value of residual voltage measurements during the application of impulses of 8/20us nominal discharge current (In); a rounding voltage value of maximum measurement.
6. MCOV/UC: Maximum Continuous Operating Voltage - maximum r.m.s. voltage that could be continuously applied to the SPD.
7. The series modules can be used in parallel connections for the indication circuit connection.
8. * = - P or PM
9. Repetitive Surge Withstanding: 15 strikes at 10,000A (8/20us) with steady MLV/Up.
10. LSP10480* passed Operational Voltage Test (552Vac, 30 minutes) based on UL 1449 4th edition clause 43.
Figure 1. Repetitive Surge Capability for LSP10
100000
10000
Number of Pulses
1
2
15
1000
100
102
103
104
105
106
10
1
10 
20
100 1000
Impulse Duration (µsecs)
10000
Strikes
1
2
15
100
1,000
10,000
100,000
1,000,000
Pulse Rating
(8x20µSec)
Surge
20,000A
15,000A
10,000A
3,000A
1,600A
650A
400A
240A
© 2019 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/03/19


Features LSP10 Module Series Surge Protection Mo dule LED Lighting Surge Protection Modu le > LSP10 RoHS Agency Approvals Age ncy Standard UL1449 Agency File Numbe r E320116 Applications • Outdoor a nd Commercial LED Lighting • Roadway lighting • Traffic lighting • Di gital signage • Wash wall lighting • Parking garage/lot lighting • F lood lighting • Tunnel lighting • Street lighting Additional Informatio n Description The Littelfuse LSP10 th ermally protected Surge Protective Devi ce is a self-protected device which is specially designed to be used in outdoo r and commercial LED lighting fixtures for transient overvoltage protection. I t is constructed with Littelfuse therma lly protected varistor technology. Its built-in thermal disconnect function pr ovides additional protection to prevent catastrophic failure and fire hazard e ven under the extreme circumstances of varistor end-of-life or sustaining over voltage conditions. LSP10 series connected option allows clear indication of the.
Keywords LSP10480LLS, datasheet, pdf, Littelfuse, Surge, Protection, Module, SP10480LLS, P10480LLS, 10480LLS, LSP10480LL, LSP10480L, LSP10480, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)