JTH1524S05

DC-DC 15 Watts JTH Series xppower.com 4:1 Input Range 1500 VDC Isolation Efficiency up to 86% -40 °C to +100 °C Operating Temperature UL Approved Optional Remote On/Off Single & Dual Outputs 3 Year Warranty Specification Input Input Voltage Range Input Current Input Filter Input Reflected Ripple Current Input Surge Undervoltage Lockout 24 V (9-36 VDC) 48 V (18-72 VDC) See table Pi network 35 mA rms through 12 µH inductor 24 V models 40 VDC for 100 ms 48 V models 80 VDC for 100 ms 24 V models ON 8.6 V, OFF 8 VDC typical 48 V models ON 16.0 V, OFF 14 V typical Output Output Voltage See table Minimum Load No minimum load required Line Regulation ±0.5% Load Regulation ±0.5% 10-100% load, ±1.0% 10% load Cross Regulation ±5% on dual output models (see note 3) Setpoint Accuracy ±1% Start Up Delay <10 ms Start Up Rise Time <20 ms Ripple & Noise 75 mV pk-pk 20 MHz bandwidth Transient Response 3% max deviation, recovery to within 1% in 200 µs for 25% load change Temperature Coefficient 0.02%/°C Overvoltage Protection None Overcurrent Protection 140% typical of full load at nominal input Short Circuit Protection Trip & restart (hiccup mode), auto recovery Remote On/Off Optional (see application note) Maximum Capacitive See table Load General Efficiency Isolation Isolation Resistance Isolation Capacitance Switching Frequency Power Density MTBF See table 1500 VDC Input to Output 1000 VDC I...