JTF1224S15

DC-DC 8-15 Watts JTF Series xppower.com High Power Density Wide 4:1 Input Range Operating Temperature -40 ºC to +105 ºC Single & Dual Outputs Standard Remote On/Off 1600 VDC Isolation 3 Year Warranty Specification Input Input Voltage Range Input Current Input Filter Input Reflected Ripple Current Input Surge 24 V (9-36 VDC) 48 V (18-75 VDC) See table Pi network 20 mA pk-pk through 12 µH inductor and 47 µF capacitor, 5 Hz to 20 MHz 24 V models: 50 VDC for 100 ms (1 second for 12 W versions) 48 V models: 100 VDC for 100 ms (1 second for 12 W versions) Output Output Voltage See table Minimum Load No minimum load required Initial Set Accuracy ±1.0% max for JTF15, ±1.2% for others Start Up Delay 20 ms typical Line Regulation ±0.2% max single, ±0.5% dual Load Regulation ±0.5% max single, ±1.0% max dual Cross Regulation ±5% on dual output models (see note 2) Transient Response <3% max deviation, recovery to within 1% in 250 µs for a 25% load change Ripple & Noise 85 mV pk-pk, 20 MHz bandwidth for JTF08, JTF10 and JTF12, 60 mV pk-pk 20 MHz bandwidth for JTF15 (see note 3) Overload Protection 150% of full load typical for JTF08 & JTF15, 170% of full load typical for JTF10 & JTF12 Overvoltage Protection 3.3 V models: 3.9 V typical 5 V models: 6.2 V typical 12 V models: 15 V typical 15 V models: 18 V typical ±5 V models: ±6.2 V typical ±12 V models: ±15 V typical ±15 V models: ±18 V typical Short Circuit Protection...