DC-DC Converter
DC-DC
6 Watts JTE Series
xppower.com
• 4:1 Input Range • DIP-24 Plastic Case • Operating Temperature -40 °C to +100 °C...
Description
DC-DC
6 Watts JTE Series
xppower.com
4:1 Input Range DIP-24 Plastic Case Operating Temperature -40 °C to +100 °C Single & Dual Outputs Optional Metal Case 1500 VDC Isolation, 3000 VDC Option 3 Year Warranty
Specification
Input
Input Voltage Range
24 V (9-36 VDC) 48 V (18-75 VDC)
Input Current
See table
Input Filter
Pi network
Input Reflected Ripple 20 mA pk-pk through 12 µH inductor and 4.7 µF capacitor
Input Surge
24 V models 50 VDC for 100 ms 48 V models 100 VDC for 100 ms
Under Voltage Lockout 24 V models on >8.5 V, off <8.0 V
48 V models on >16.5 V, off <15.5 V
Output
Output Voltage
See table
Output Voltage Balance ±2% max, dual output models
Initial Set Accuracy ±2% max
Minimum Load
No minimum load required
Line Regulation
±0.5% max
Load Regulation
±1.2% max for single output and ±5% max for dual output from 10-100%
Cross Regulation
±5% max on dual output models (see note 4)
Start Up Delay
20 ms typical
Ripple & Noise
80 mV pk-pk (100 mV for D24 models), 20 MHz bandwidth (see note 5)
Transient Response
<3% max deviation, recovery to within 1% in 300 µs for a 25% load change (4% max. deviation for S3V3 models)
Overload Protection 135% - 185% of Full Load
Short Circuit Protection Trip & restart (Hiccup mode), auto recovery
Maximum Capacitive See table Load
Temperature Coefficient
±0.02/°C max
General
Efficiency Isolation Voltage
Isolation Capacitance Isolation Resistance Switching...
Similar Datasheet