Document
DC-DC
6 Watts JTE Series
xppower.com
• 4:1 Input Range • DIP-24 Plastic Case • Operating Temperature -40 °C to +100 °C • Single & Dual Outputs • Optional Metal Case • 1500 VDC Isolation, 3000 VDC Option • 3 Year Warranty
Specification
Input
Input Voltage Range
• 24 V (9-36 VDC) 48 V (18-75 VDC)
Input Current
• See table
Input Filter
• Pi network
Input Reflected Ripple • 20 mA pk-pk through 12 µH inductor and 4.7 µF capacitor
Input Surge
• 24 V models 50 VDC for 100 ms 48 V models 100 VDC for 100 ms
Under Voltage Lockout • 24 V models on >8.5 V, off <8.0 V
48 V models on >16.5 V, off <15.5 V
Output
Output Voltage
• See table
Output Voltage Balance • ±2% max, dual output models
Initial Set Accuracy • ±2% max
Minimum Load
• No minimum load required
Line Regulation
• ±0.5% max
Load Regulation
• ±1.2% max for single output and ±5% max for dual output from 10-100%
Cross Regulation
• ±5% max on dual output models (see note 4)
Start Up Delay
• 20 ms typical
Ripple & Noise
• 80 mV pk-pk (100 mV for D24 models), 20 MHz bandwidth (see note 5)
Transient Response
• <3% max deviation, recovery to within 1% in 300 µs for a 25% load change (4% max. deviation for S3V3 models)
Overload Protection • 135% - 185% of Full Load
Short Circuit Protection • Trip & restart (Hiccup mode), auto recovery
Maximum Capacitive • See table Load
Temperature Coefficient
• ±0.02/°C max
General
Efficiency Isolation Voltage
Isolation Capacitance Isolation Resistance Switching Frequency Power Density MTBF
• See table • 1500 VDC Input to Output, for optional
high isolation version 3000 VDC input to output add suffix ‘-H’ to model number 1000 VDC Input to Case 1000 VDC Output to Case • 1000 pF typical input to output
• 109Ω • 330 kHz typical • 15 W/in3 • >800 kHrs to MIL-HDBK-217F
at 25 °C, GB
Environmental
Operating Temperature • -40 °C to +100 °C, derate from 100% load at +60 °C to no load at +100 °C
Case Temperature
• +100 °C max
Storage Temperature • -55 °C to +125 °C
Cooling
• Natural convection
Operating Humidity • Up to 95%, non-condensing
EMC
Emissions ESD Immunity
Radiated immunity EFT/Burst Surge Conducted Immunity Magnetic Fields
• EN55022 class A conducted • EN61000-4-2, Level 3
8 kV air discharge Perf Criteria B, 6 kV contact discharge Perf Criteria B • EN61000-4-3, 10 V/m, Perf Criteria A • EN61000-4-4, level 3, Perf Criteria A* • EN61000-4-5, level 2, Perf Criteria A* • EN61000-4-6, 10 Vrms, Perf Criteria A • EN61000-4-8, 1 A/m, Perf Criteria A
Safety
Safety Approvals
• UL60950-1, CAN/CSA C22.2 No.60950-1
* External input capacitor required, 220µF/100V
DC-DC
Models and Ratings
JTE06
Input Voltage 9-36 V
18-75 V
Output Voltage
3.3 V 5.0 V 12.0 V 15.0 V 24.0 V ±3.3 V ±5.0 V ±12.0 V ±15.0 V ±24.0 V
3.3 V 5.0 V 12.0 V 15.0 V 24.0 V ±3.3 V ±5.0 V ±12.0 V ±15.0 V ±24.0 V
Output Current
1400 mA 1200 mA 500 mA 400 mA
250 mA ±909 mA ±600 mA ±250 mA ±200 mA ±125 mA
1400 mA 1200 mA 500 mA 400 mA
250 mA ±909 mA ±600 mA ±250 mA.