TPS25200-Q1

Product Folder Sample & Buy Technical Documents Tools & Software Support & Community TPS25200-Q1 SLVSCU5 – MARCH 2015 TPS25200-Q1 5-V eFuse With Precision Adjustable Current Limit and Overvoltage Clamp 1 Features 1 Qualified for Automotive Applications AEC-Q100 Qualified With the Following Results: – Device HBM Classification Level 2 – Device CDM Classification Level C5 2.5-V to 6.5-V Operation 20-V Continuous VIN (Absolute Maximum) 7.6-V Input Overvoltage Shutoff 5.25-V to 5.55-V Fixed Overvoltge Clamp 0.6-μs Overvoltage Lockout Response 3.5-μs Short-Circuit Response 67-mΩ High-Side MOSFET Accurate 2.5-A Minimum, 2.9-A Maximum and 2.1-A Minimum, 2.5-A Maximum Setting (Including Resistor) ±6.3% Current-Limit Accuracy at 2.7 A Reverse Current Blocking While Disabled Built-in Soft Start Pin-to-Pin Compatible with TPS2553 3 Description The TPS25200-Q1 device is a 5-V eFuse with a precision current-limit and overvoltage clamp. The device provides robust protection for load and source during overvoltage and overcurrent events. The TPS25200-Q1 device is an intelligent protected load-switch with a VIN value tolerant to 20 V. In the event that an incorrect voltage is applied at the IN pin, the output clamps to 5.4 V to protect the load. If the voltage at the IN pin exceeds 7.6 V, the device disconnects the load to prevent damage to the device, load, or both. The TPS25200-Q1 device has an internal 67-mΩ power switch and is intended for protecting the ...