Optocoupler
WWW.LUNAINC.COM
Optocoupler NSL-32H-100 Series
Precision – Control – Results
6.4 (0.250)
9.8 (0.385)
Max
-
Color Do...
Description
WWW.LUNAINC.COM
Optocoupler NSL-32H-100 Series
Precision – Control – Results
6.4 (0.250)
9.8 (0.385)
Max
-
Color Dot
3.81 (0.150) +
2.54 (0.100)
Tolerance 0.13 (+/- 0.005)
11.2 (0.440)
5.08 (0.200)
LED
Photocell
LED
+
Photocell
0.040
3.8 (0.148)
Circuit Schematic
-
Dimensions in mm (inches)
DESCRIPTION
This series of optocoupler consists of an LED input optically coupled to a photocell. The photocell resistance is high when the LED current is “off” and low when the LED current is “on”. These optocouplers are mounted on a lead spacer platform that facilitates mounting on a PCB. The different “on” resistance ranges are shown in table below.
FEATURES
Compact, moisture resistant package Low LED current Passive resistance output
RELIABILITY
CdS/CdSe photo resistors are temperature sensitive, it should be noted that operation of the photocell above +75˚C does not usually lead to catastrophic failure but the photoconductive surface may be damaged leading to irreversible changes in sensitivity
APPLICATIONS Industrial sensing
Contact Luna for recommendations on specific test conditions and procedures.
ABSOLUTE MAXIMUM RATINGS
SYMBOL
MIN
MAX
UNITS
Isolation Voltage Operating Temperature Storage Temperature Soldering Temperature
- - 2000 -40 to +75 -40 to +75
- to +260
V Ta = 23°C UNLESS OTHERWISE NOTED °C non condensing °C °C >0.05” from case for <5 sec.
Information in this technical datasheet is believed to be correct and reliable. However, no respo...
Similar Datasheet