RC4580-Q1 Amplifier Datasheet

RC4580-Q1 Datasheet, PDF, Equivalent


Part Number

RC4580-Q1

Description

Dual Audio Operational Amplifier

Manufacture

etcTI

Total Page 18 Pages
Datasheet
Download RC4580-Q1 Datasheet


RC4580-Q1
RC4580-Q1
www.ti.com
SLOS707A – DECEMBER 2010 – REVISED JULY 2012
DUAL AUDIO OPERATIONAL AMPLIFIER
Check for Samples: RC4580-Q1
FEATURES
1
• Qualified for Automotive Applications
• AEC-Q100 Qualified With the Following
Results:
– Device Temperature Grade 1: –40°C to
125°C Ambient Operating Temperature
Range
– Device HBM ESD Classification Level H2
– Device CDM ESD Classification Level C3B
• Operating Voltage . . . ±2 V to ±18 V
• Low Noise Voltage . . . 0.8 μVrms (TYP)
• Wide GBW . . . 12 MHz (TYP)
• Low THD . . . 0.0005% (TYP)
• Slew Rate . . . 5 V/μs (TYP)
• Suitable for Automotive Applications Such As
Audio Preamplifier, Active Filter, Headphone
Amplifier, Industrial Measurement Equipment
• Drop-In Replacement for NJM4580
• Pin and Function Compatible With LM833,
NE5532, NJM4558/9, and NJM4560/2/5
D PACKAGE
SOIC – 8
(TOP VIEW)
PW PACKAGE
TSSOP – 8
(TOP VIEW)
DESCRIPTION
The RC4580-Q1 device is a dual operational amplifier that is designed optimally for audio applications, such as
improving tone control. It offers low noise, high gain bandwidth, low harmonic distortion, and high output current.
All of these features make the device ideally suited for audio electronics, such as audio preamplifiers and active
filters, as well as industrial measurement equipment. When high output current is required, the RC4580-Q1
device can be used as a headphone amplifier. Due to its wide operating supply voltage, the RC4580-Q1 device
can also be used in low-voltage applications.
TA
–40°C to 125°C
–40°C to 125°C
ORDERING INFORMATION(1)
PACKAGE (2)
ORDERABLE PART NUMBER
SOIC – D
Reel of 2000
RC4580QDRQ1
TSSOP - PW
Reel of 2000
RC4580QPWRQ1
TOP-SIDE MARKING
R4580Q
R4580Q
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
(2) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2010–2012, Texas Instruments Incorporated

RC4580-Q1
RC4580-Q1
SLOS707A – DECEMBER 2010 – REVISED JULY 2012
www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
Figure 1. EQUIVALENT SCHEMATIC
ABSOLUTE MAXIMUM RATINGS(1)
over operating free-air temperature range (unless otherwise noted)
VCC Supply voltage
Input voltage (any input)
VID Differential input voltage
Output current
TA
Tstg
Electrostatic
Discharge
(ESD) Ratings
Ambient temperature range
Storage temperature range
Human-body model (HBM) AEC-Q100 Classification Level H2
Charged-device model (CDM) AEC-Q100 Classification Level C3B
MIN MAX UNIT
±18 V
±15 V
±30 V
±50 mA
–40 125 °C
–60 125 °C
2 kV
750 V
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating
Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
2 Copyright © 2010–2012, Texas Instruments Incorporated


Features RC4580-Q1 www.ti.com SLOS707A – DECE MBER 2010 – REVISED JULY 2012 DUAL A UDIO OPERATIONAL AMPLIFIER Check for Sa mples: RC4580-Q1 FEATURES 1 • Qualif ied for Automotive Applications • AEC -Q100 Qualified With the Following Resu lts: – Device Temperature Grade 1: 40°C to 125°C Ambient Operating Temp erature Range – Device HBM ESD Classi fication Level H2 – Device CDM ESD Cl assification Level C3B • Operating Vo ltage . . . ±2 V to ±18 V • Low Noi se Voltage . . . 0.8 μVrms (TYP) • W ide GBW . . . 12 MHz (TYP) • Low THD . . . 0.0005% (TYP) • Slew Rate . . . 5 V/μs (TYP) • Suitable for Automot ive Applications Such As Audio Preampli fier, Active Filter, Headphone Amplifie r, Industrial Measurement Equipment • Drop-In Replacement for NJM4580 • Pi n and Function Compatible With LM833, N E5532, NJM4558/9, and NJM4560/2/5 D PA CKAGE SOIC – 8 (TOP VIEW) – – – PW PACKAGE TSSOP – 8 (TOP VIEW) – – – DESCRIPTION The RC4580-Q1 device is a dual operational amplifier that is designed optimally for audio applic.
Keywords RC4580-Q1, datasheet, pdf, etcTI, Dual, Audio, Operational, Amplifier, C4580-Q1, 4580-Q1, 580-Q1, RC4580-Q, RC4580-, RC4580, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)