LM211-Q1

D Qualified for Automotive Applications D Fast Response Times D Strobe Capability D Maximum Input Bias Current . . . 150 nA D Maximum Input Offset Current . . . 20 nA D Can Operate From Single 5-V Supply LM211ĆQ1 DIFFERENTIAL COMPARATOR WITH STROBES SLCS143A − APRIL 2004 − REVISED APRIL 2008 D PACKAGE (TOP VIEW) EMIT OUT IN+ IN− VCC− 1 2 3 4 8 VCC+ 7 COL OUT 6 BAL/STRB 5 BALANCE description/ordering information The LM211 is a single high-speed voltage comparator. This device is designed to operate from a wide range of power-supply voltages, including ±15-V supplies for operational amplifiers and 5-V supplies for logic systems. The output levels are compatible with most TTL and MOS circuits. This comparator is capable of driving lamps or relays and switching voltages up to 50 V at 50 mA. All inputs and outputs can be isolated from system ground. The outputs can drive loads referenced to ground, VCC+, or VCC−. Offset balancing and strobe capabilities are available, and the outputs can be wire-OR connected. If the strobe is low, the output is in the off state, regardless of the differential input. ORDERING INFORMATION{ TA VIO max AT 25°C PACKAGE† ORDERABLE PART NUMBER TOP-SIDE MARKING −40°C to 125°C 3 mV SOIC (D) Reel of 2500 LM211QDRQ1 LM211Q1 † For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI web site at http://www.ti.com. ‡ Package drawings, thermal data, and symbolization ar...