OCTAL BUFFERS AND LINE DRIVERS
SN54HC240, SN74HC240
SCLS128G – DECEMBER 1982 – REVISED APRIL 2022
SNx4HC240 Octal Buffers and Line Drivers With 3-State...
Description
SN54HC240, SN74HC240
SCLS128G – DECEMBER 1982 – REVISED APRIL 2022
SNx4HC240 Octal Buffers and Line Drivers With 3-State Outputs
1 Features
Wide Operating Voltage Range of 2 V to 6 V High-Current Outputs Drive Up To 15
LSTTL Loads Low Power Consumption, 80-µA Max ICC Typical tpd = 9 ns ±6-mA Output Drive at 5 V Low Input Current of 1 µA Max 3-State Outputs Drive Bus Lines or Buffer Memory
Address Registers
2 Description
These octal buffers and line drivers are designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. The ’HC240 devices are organized as two 4-bit buffers/drivers with separate output-enable (OE) inputs. When OE is low, the device passes inverted data from the A inputs to the Y outputs. When OE is high, the outputs are in the high-impedance state.
PART NUMBER SN74HC240DW SN74HC240DBR SN74HC240N SN74HC240NSR SN74HC240PW SN74HC240J SNJ54HC240FK SNJ54HC240W
Device Information
PACKAGE(1) BODY SIZE (NOM)
SOIC (20)
12.8 mm × 7.50 mm
SSOP (20)
7.2 mm × 5.30 mm
PDIP (20)
25.40 mm × 6.35 mm
SO (20)
15.00 mm × 5.30 mm
TSSOP (20) 6.50 mm × 4.40 mm
CDIP (20)
26.92 mm × 6.92 mm
LCCC (20)
8.89 mm × 8.45 mm
CFP (20)
13.72 mm × 6.92 mm
(1) For all available packages, see the orderable addendum at the end of the data sheet.
Functional Block Diagram
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, us...
Similar Datasheet