OCTAL BUFFERS AND LINE DRIVERS
SN54HC241, SN74HC241
SCLS300E – JANUARY 1996 – REVISED MAY 2022
SNx4HC241 Octal Buffers and Line Drivers With 3-State Ou...
Description
SN54HC241, SN74HC241
SCLS300E – JANUARY 1996 – REVISED MAY 2022
SNx4HC241 Octal Buffers and Line Drivers With 3-State Outputs
1 Features
Wide operating voltage range of 2 V to 6 V High-current outputs drive up to 15 LSTTL loads Low power consumption, 80-μA max ICC Typical tpd =11 ns ±6-mA output drive at 5 V Low input current of 1 μA max 3-state outputs drive bus lines or buffer memory
address registers
2 Description
These octal buffers and line drivers are designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. The ’HC241 devices are organized as two 4-bit buffers/drivers with separate output-enable (1OE and 2OE) inputs. When 1OE is low or 2OE is high, the device passes noninverted data from the A inputs to the Y outputs. When 1OE is high or 2OE is low, the outputs for the respective buffers/drivers are in the high-impedance state.
PART NUMBER SN74HC241DW SN74HC241N SN74HC241NSR SN74HC241PW SN54HC241J SNJ54HC241FK
Device Information
PACKAGE(1) BODY SIZE (NOM)
SOIC (20)
12.80 mm × 7.50 mm
PDIP (20)
25.40 mm × 6.35 mm
SO (20)
15.00 mm × 5.30 mm
TSSOP (20) 6.50 mm × 4.40 mm
CDIP (20)
26.92 mm × 6.92 mm
LCCC (20)
8.89 mm × 8.45 mm
(1) For all available packages, see the orderable addendum at the end of the data sheet.
Functional Block Diagram
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in saf...
Similar Datasheet