DatasheetsPDF.com

MCP96L01 Dataheets PDF



Part Number MCP96L01
Manufacturers Microchip
Logo Microchip
Description Thermocouple EMF to Temperature Converter
Datasheet MCP96L01 DatasheetMCP96L01 Datasheet (PDF)

MCP960X/L0X/RL0X Thermocouple EMF to Temperature Converter, ±1.5°C Maximum Accuracy Features • Thermocouple Electromotive Force (EMF) to °C Converter: - Integrated cold-junction compensation - Integrated thermocouple open-circuit and short-circuit detection • Supported Types (designated by NIST ITS-90): - Type K, J, T, N, S, E, B and R • Sensor Accuracy for Thermocouple Hot-Junction: - MCP9600/01 ±0.5°C/±1.5°C (typ./max.) - MCP96L00/L01 ±2.0°C/±4.0°C (typ./max.) - MCP96RL00/RL01 ±4.0°C/±8.0°C .

  MCP96L01   MCP96L01



Document
MCP960X/L0X/RL0X Thermocouple EMF to Temperature Converter, ±1.5°C Maximum Accuracy Features • Thermocouple Electromotive Force (EMF) to °C Converter: - Integrated cold-junction compensation - Integrated thermocouple open-circuit and short-circuit detection • Supported Types (designated by NIST ITS-90): - Type K, J, T, N, S, E, B and R • Sensor Accuracy for Thermocouple Hot-Junction: - MCP9600/01 ±0.5°C/±1.5°C (typ./max.) - MCP96L00/L01 ±2.0°C/±4.0°C (typ./max.) - MCP96RL00/RL01 ±4.0°C/±8.0°C (typ./max.) • Measurement Resolution: - Hot and cold-junctions: +0.0625°C (typical) • Four Programmable Temperature Alert Outputs: - Monitor hot or cold-junction temperatures - Detect rising or falling temperatures - Up to 255°C of programmable hysteresis • Programmable Digital Filter for Temperature • Low Power: - Shutdown mode - Burst mode: 1 to 128 temperature samples • 2-Wire Interface: I2C Compatible, 100 kHz: - Supports eight devices per I2C Bus • Operating Voltage Range: 2.7V to 5.5V • Operating Current: 300 µA (typical) • Shutdown Current: 2 µA (typical) • Package: 20-Lead MQFN Typical Applications • Petrochemical Thermal Management • Hand-Held Measurement Equipment • Industrial Equipment Thermal Management • Commercial and Industrial Ovens • Industrial Engine Thermal Monitor • Temperature Detection Racks Description The Microchip Technology Inc. MCP960X/L0X/RL0X converts thermocouple EMF to degree Celsius with integrated cold-junction compensation. The temperature correction coefficients are derived from the National Institute of Standards and Technology (NIST) ITS-90 Thermocouple Database. The MCP9600/01 corrects the thermocouple nonlinear error characteristics of eight thermocouple types and outputs ±0.5°C/±1.5°C (Typ./Max.). The MCP960X/L0X/RL0X digital temperature sensor comes with user-programmable registers which provide design flexibility for various temperature sensing applications. The registers allow user-selectable settings, such as Low-Power modes for battery powered applications, adjustable digital filter for fast transient temperatures and four individually programmable temperature alert outputs which can be used to detect multiple temperature zones. In addition, the MCP9601/L01/RL01 family provides integrated Thermocouple open-circuit and short-circuit detection features. An alert signal is asserted when the thermocouple wire is broken or disconnected. Similarly, alert signal is asserted when the Thermocouple is shorted to ground or power. The temperature alert limits have multiple user-programmable configurations, such as alert polarity as either an active-low or active-high push-pull output, and output function as a Comparator mode (useful for thermostat-type operation) or Interrupt mode for microprocessor-based systems. In addition, the alerts can detect either a rising or a falling temperature with up to +255°C hysteresis. This sensor uses an industry standard 2-wire, I2C compatible serial interface and supports up to eight dev.


MCP9601 MCP96L01 MCP96RL01


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)