BQ77910A Protector Datasheet

BQ77910A Datasheet, PDF, Equivalent


Part Number

BQ77910A

Description

Multi-Cell Lithium-Ion/Polymer Precision Protector

Manufacture

etcTI

Total Page 30 Pages
Datasheet
Download BQ77910A Datasheet


BQ77910A
Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
bq77910A
SLUSAV6A – FEBRUARY 2012 – REVISED OCTOBER 2014
bq77910A Multi-Cell Lithium-Ion/Polymer Precision Protector
Not Recommended for New Designs
1 Features
• 4-, 5-, 6-, 7-, 8-, 9-, or 10-Series Cell Protection
• Individual Cell-Voltage Monitoring
• Low-Side NMOS FET Drive for Charge and
Discharge Control
• Compatible With 1-mΩ Current-Sense Resistor
• Supply-Voltage Range From 5.6 V to 50 V
• Integrated 3.3-V Micro-Power LDO Regulator
• Low Supply Current
– Normal Mode: 50 µA, Typical
– Shutdown Mode, LDO OFF: 3 µA, Typical
1
• 38-Pin TSSOP Package
• Internal 50-mA Automatic Cell Balancing
2 Applications
• Cordless Power Tools
• Cordless Lawn Equipment
• Electric Bikes
• UPS
• Light Electric Vehicles (LEV)
3 Description
The bq77910A is a battery protection and cell balancing device intended for Li-Ion and Li-Polymer battery packs.
The bq77910A monitors 4- to 10-series individual cell voltages and provides fast-acting outputs that may be used
to drive N-channel MOSFETs to interrupt the power path. Activation delays and recovery methods for safety
conditions are fully programmable in non-volatile memory.
Automatic cell balancing is provided using internal 50-mA cell circuits. A robust balancing algorithm ensures
optimum performance by maintaining all cell voltages in balance. Balancing may be configured to operate at all
times, only during charge, or can be disabled completely.
PART NUMBER
bq77910A
Device Information(1)
PACKAGE
TSSOP (38)
(1) For all available packages, see the orderable addendum at the end of the data sheet.
BODY SIZE (NOM)
9.70 mm × 4.40 mm
WARNING
The bq77910A-series integrated circuit helps system designers greatly enhance
the safety of their Li-Ion and Li-Polymer battery packs when integrated
effectively and in accordance with the instructions detailed in this document by
technically qualified personnel familiar with battery pack application safety. This
data sheet must be read in its entirety before working with the bq77910A.
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.

BQ77910A
bq77910A
Not Recommended for New Designs
SLUSAV6A – FEBRUARY 2012 – REVISED OCTOBER 2014
www.ti.com
Table of Contents
1 Features .................................................................. 1
2 Applications ........................................................... 1
3 Description ............................................................. 1
4 Revision History..................................................... 2
5 Description (continued)......................................... 3
6 Pin Configuration and Functions ......................... 4
7 Specifications......................................................... 5
7.1 Absolute Maximum Ratings ...................................... 5
7.2 Handling Ratings....................................................... 6
7.3 Recommended Operating Conditions....................... 6
7.4 Thermal Information .................................................. 7
7.5 Electrical Characteristics........................................... 8
7.6 Serial Communication Interface (for Configuration
Only)......................................................................... 10
8 Detailed Description ............................................ 11
8.1 Overview ................................................................. 11
8.2 Functional Block Diagram ....................................... 11
8.3 Feature Description................................................. 11
8.4 Device Functional Modes........................................ 25
8.5 Programming and Register Maps ........................... 26
9 Application and Implementation ........................ 37
9.1 Application Information............................................ 37
10 Device and Documentation Support ................. 52
10.1 Documentation Support ........................................ 52
10.2 Trademarks ........................................................... 52
10.3 Electrostatic Discharge Caution ............................ 52
10.4 Glossary ................................................................ 52
11 Mechanical, Packaging, and Orderable
Information ........................................................... 52
4 Revision History
Changes from Original (February 2012) to Revision A
Page
• Deleted the reference to medical equipment in the Applications section............................................................................... 1
• Changed the minimum values for discharge and charge short circuit ................................................................................ 12
• Added two table notes to Table 2......................................................................................................................................... 12
• Added further detail to the DPCKN description .................................................................................................................... 13
• Deleted an incorrect cross-reference label .......................................................................................................................... 15
• Added a default to Discharge Overcurrent Detection Delay Settings ................................................................................. 31
• Added new table notes ........................................................................................................................................................ 31
• Added a new WARNING ..................................................................................................................................................... 31
• Added a default to SCD Delay Settings .............................................................................................................................. 32
• Changed the delay for 0000 in Charge Short-Circuit Delay-Time Settings.......................................................................... 33
• Added a new table note ....................................................................................................................................................... 33
• Changed the Cell-Balance Enable Control table ................................................................................................................. 34
• Added application disclaimer note to the Application and Implementation section.............................................................. 37
2 Submit Documentation Feedback
Product Folder Links: bq77910A
Copyright © 2012–2014, Texas Instruments Incorporated


Features Product Folder Sample & Buy Technical Documents Tools & Software Support & Community bq77910A SLUSAV6A – FEBRU ARY 2012 – REVISED OCTOBER 2014 bq779 10A Multi-Cell Lithium-Ion/Polymer Prec ision Protector Not Recommended for New Designs 1 Features • 4-, 5-, 6-, 7- , 8-, 9-, or 10-Series Cell Protection • Individual Cell-Voltage Monitoring • Low-Side NMOS FET Drive for Charge and Discharge Control • Compatible Wi th 1-mΩ Current-Sense Resistor • Sup ply-Voltage Range From 5.6 V to 50 V Integrated 3.3-V Micro-Power LDO Regu lator • Low Supply Current – Normal Mode: 50 µA, Typical – Shutdown Mod e, LDO OFF: 3 µA, Typical 1 • 38-Pi n TSSOP Package • Internal 50-mA Auto matic Cell Balancing 2 Applications • Cordless Power Tools • Cordless Lawn Equipment • Electric Bikes • UPS Light Electric Vehicles (LEV) 3 Des cription The bq77910A is a battery prot ection and cell balancing device intend ed for Li-Ion and Li-Polymer battery packs. The bq77910A monitors 4- to 10-series individual cell volt.
Keywords BQ77910A, datasheet, pdf, etcTI, Multi-Cell, Lithium-Ion/Polymer, Precision, Protector, Q77910A, 77910A, 7910A, BQ77910, BQ7791, BQ779, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)