High Side Gate Driver
FAN7085-GF085 High Side Gate Driver with Recharge FET
FAN7085-GF085
High Side Gate Driver with Recharge FET
Features
•...
Description
FAN7085-GF085 High Side Gate Driver with Recharge FET
FAN7085-GF085
High Side Gate Driver with Recharge FET
Features
Qualified to AEC Q100 Floating channel designed for bootstrap operation fully oper-
ational up to 300V. Tolerance to negative transient voltage on VS pin dv/dt immune. Gate drive supply range from 4.5V to 20V Under-voltage lockout CMOS Schmitt-triggered inputs with pull-down and pull-up High side output out of phase with input (Inverted input) Reset input Internal recharge FET for bootstrap refresh
Typical Applications
Diesel and gasoline injectors/valves MOSFET-and IGBT high side driver applications
Description
The FAN7085-GF085 is a high-side gate drive IC with reset input and built-in recharge FET. It is designed for high voltage and high speed driving of MOSFET or IGBT, which operates up to 300V. ON Semiconductor's high-voltage process and common-mode noise cancellation technique provide stable operation in the high side driver under high-dV/dt noise circumstances. Logic input is compatible with standard CMOS outputs. The UVLO cir-cuits prevent from malfunction when VCC and VBS are lower than the specified threshold voltage. It is available with space saving SOIC-8 Package. Minimum source and sink current capability of output driver is 250mA and 250mA. Built-in recharge FET to refresh bootstrap circuit is very useful for circuit topology requiring switches on low and high side of load.
SOIC-8
Ordering Information
Device
Pack...
Similar Datasheet