Host-Controlled Multi-Chemistry Battery Charger
Not Recommended For New Designs
bq24751B
www.ti.com ......................................................................
Description
Not Recommended For New Designs
bq24751B
www.ti.com .......................................................................................................................................................... SLUS835A – JULY 2008 – REVISED MARCH 2009
Host-Controlled Multi-Chemistry Battery Charger with Low Iq and System Power Selector
FEATURES
1
2 NMOS-NMOS Synchronous Buck Converter with 300 kHz Frequency and >95% Efficiency
30-ns Minimum Driver Dead-time and 99.5% Maximum Effective Duty Cycle
High-Accuracy Voltage and Current Regulation – ±0.5% Charge Voltage Accuracy
– ±3% Charge Current Accuracy
– ±3% Adapter Current Accuracy
– ±2% Input Current Sense Amp Accuracy Integration
– Automatic System Power Selection From AC/DC Adapter or Battery
– Internal Loop Compensation
– Internal Soft Start Safety
– Programmable Input Overvoltage Protection (OVP)
– Dynamic Power Management (DPM) with Status Indicator
– Programmable Inrush Adapter Power (ACOP) and Overcurrent (ACOC) Limits
– Reverse-Conduction Protection Input FET Supports Two, Three, or Four Li+ Cells 5 – 24 V AC/DC-Adapter Operating Range Analog Inputs with Ratiometric Programming
via Resistors or DAC/GPIO Host Control
– Charge Voltage (4-4.512 V/cell) – Charge Current (up to 10 A, with 10-mΩ
Sense Resistor)
– Adapter Current Limit (DPM) Status and Monitoring Outputs
– AC/DC Adapter Present with Programmable Voltage Threshold
– Current Drawn from Input Source Battery Learn Cycle Control Supports Any B...
Similar Datasheet