ACG1F Controller Datasheet

ACG1F Datasheet, PDF, Equivalent


Part Number

ACG1F

Description

USB Type-C Port Controller

Manufacture

Cypress

Total Page 30 Pages
Datasheet
Download ACG1F Datasheet


ACG1F
ACG1F Datasheet
USB Type-C Port Controller
ACG1F Datasheet, USB Type-C Port Controller
General Description
ACG1F (Type-A to Type-C Generation - 1 FET) is a single-port USB Type-C controller that complies with the latest USB Type-C
specifications. ACG1F provides a complete USB Type-C control solution for notebooks and desktops. It can also be used in devices
required to convert legacy Type-A data port to Type-C data port. ACG1F uses Cypress' proprietary M0S8 technology with a 32-bit
Arm® Cortex®-M0 processor with 16-KB flash and integrates a Type-C controller (no Power Delivery) and a VBUS load switch
(5 V/3A).
Features
USB Type-C Support
Integrated Type-C controller supporting Type-C v1.3
Integrated 2x VCONN FET with OCP to power EMCA cable
Integrated VBUS Load Switch Controller
Integrated VBUS load switch supports
5 V/3A VBUS NFET
RDSon of load switch: 45-m(typ) for 40-QFN,15-m(typ)
for 24-QFN
Slew rate control turn-ON on the provider VBUS switch
Configurable hardware-controlled VBUS overvoltage
protection (OVP), overcurrent protection (OCP), and reverse
current protection (RCP)
VBUS high-side current sense amplifier across external
precision series resistance (Rsense) of 5 m.
Over temperature thermal shutdown
VBUS to CC short circuit protection up to 20 V
2x I2C
Supports USB Type-C Connector System Software Interface
(UCSI) over I2C interface
Controls external high-speed redriver/retimer mux interface
over I2C
Legacy Charging
Integrated Charge Detect: BC v1.2
32-bit MCU Subsystem
16-MHz Arm Cortex-M0 CPU
16-KB Flash
4-KB SRAM
32-KB SROM
Packages
40-QFN, 0.5-mm pitch
24-QFN, 0.5-mm pitch
Supports industrial temperature range (–40 °C to +85 °C)
Cypress Semiconductor Corporation • 198 Champion Court
Document Number: 002-26356 Rev. *D
• San Jose, CA 95134-1709 • 408-943-2600
Revised October 30, 2019

ACG1F
ACG1F Datasheet
Logic Block Diagram
ACG1F: Single- Chip Type - C Controller
MCU Subsystem
Integrated Digital Blocks
arm®
Cortex® -M0
16 MHz
Flash
(16KB)
SRAM
(4KB)
1x TCPWM
2x SCB
(I2C)
USB-C Subsystem x1
Type- C PHY
I/O Subsystem
CC
VCONN
8 GPIOs
(40- QFN)
5 GPIOs
(24- QFN)
VBUS Discharge
ROM
(32KB)
Sys tem
Resources
8-bit SAR ADC
VCONN OCP
Protection
VBUS to CC Short
Protection
2x VCONN FETs
Load Switch Controller for Provider Path
(UVP/OVP /SCP/ RCP /OCP /
Thermal Shutdown)
USB Charge
Detect (BC v1.2)
Integrated VBUS Load Switch
Document Number: 002-26356 Rev. *D
Page 2 of 34


Features  ACG1F Datasheet USB Type-C Port Cont roller ACG1F Datasheet, USB Type-C Por t Controller General Description ACG1F (Type-A to Type-C Generation - 1 FET) is a single-port USB Type-C controller that complies with the latest USB Type- C specifications. ACG1F provides a comp lete USB Type-C control solution for no tebooks and desktops. It can also be us ed in devices required to convert legac y Type-A data port to Type-C data port. ACG1F uses Cypress' proprietary M0S8 t echnology with a 32-bit Arm® Cortex®- M0 processor with 16-KB flash and integ rates a Type-C controller (no Power Del ivery) and a VBUS load switch (5 V/3A). Features USB Type-C Support ■ Inte grated Type-C controller supporting Typ e-C v1.3 ■ Integrated 2x VCONN FET wi th OCP to power EMCA cable Integrated V BUS Load Switch Controller ■ Integrat ed VBUS load switch supports ❐ 5 V/3A VBUS NFET ❐ RDSon of load switch: 45 -m (typ) for 40-QFN,15-m (typ) fo r 24-QFN ■ Slew rate control turn-ON on the provider VBUS switch ■ Configurable h.
Keywords ACG1F, datasheet, pdf, Cypress, USB, Type-C, Port, Controller, CG1F, G1F, 1F, ACG1, ACG, AC, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)