PLL-Split VIF/SIF
M52334FP
PLL-Split VIF/SIF IC
REJ03F0164-0201 Rev.2.01
Jan 25, 2008
Description
The M52334FP is IF signal-processing ...
Description
M52334FP
PLL-Split VIF/SIF IC
REJ03F0164-0201 Rev.2.01
Jan 25, 2008
Description
The M52334FP is IF signal-processing IC for VCRs and TVs. It enables the PLL detection system despite size as small as that of conventional quasi-synchronous VIF/SIF detector, IF/RF AGC, SIF limiter and FM detector.
Features
Video detection output is 2 VP-P. It has built-in EQ AMP. The package is a 20-pin flat package, suitable for space saving. The video detector uses PLL for full synchronous detection circuit. It produces excellent characteristics of DG, DP,
920 kHz beat, and cross color. Dynamic AGC realizes high-speed response with only single filter. Video IF and sound IF signal processing are separated from each other. VCO output is used to obtain intercarrier. As AFT output voltage uses the APC output voltage, VCO coil is not used. Audio FM demodulation uses PLL system, so it has wide frequency range with no external parts and no adjustment. This IC corresponds to only inter of NTSC system.
Application
TV sets, VCR tuners
Recommended Operating Condition
In case of VCC and Vreg. OUT short Supply voltage range: 4.75 to 5.25 V Recommended supply voltage: 5.0 V
Incase of Vreg. OUT open Supply voltage range: 8.5 to 12.5 V
REJ03F0164-0201 Rev.2.01 Jan 25, 2008 Page 1 of 18
M52334FP
Block Diagram
RF AGC EQ F/B AFT OUT DELAY
20 19 18
VIF IN 17
VIF IN 16
GND 15
RF AGC IF AGC OUT FILTER
14 13
NFB 12
AUDIO OUT
11
VIF AMP
RF AGC
IF AGC
AF AMP
EQ AMP
AFT
VI...
Similar Datasheet