SL3S1213 G2iL Datasheet

SL3S1213 Datasheet, PDF, Equivalent


Part Number

SL3S1213

Description

UCODE G2iL

Manufacture

NXP

Total Page 30 Pages
Datasheet
Download SL3S1213 Datasheet


SL3S1213
SL3S1203_1213
UCODE G2iL and G2iL+
Rev. 4.5 — 12 February 2019
178845
Product data sheet
COMPANY PUBLIC
1 General description
NXP’s UCODE G2iL series transponder ICs offer leading-edge read range and support
industry-first features such as a Tag Tamper Alarm, Data Transfer, Digital Switch, and
advanced privacy-protection modes.
Very high chip sensitivity (-18 dBm) enables longer read ranges with simple, single-port
antenna designs. When connected to a power supply, the READ as well as the WRITE
range can be boosted to a sensitivity of -27 dBm. In fashion and retail the UCODE G2iL
series improve read rates and provide for theft deterrence. For consumer electronics
the UCODE G2iL series is suited for device configuration, activation, production control,
and PCB tagging. In authentication applications the transponders can be used to protect
brands and guard against counterfeiting. They can also be used to tag containers,
electronic vehicles, airline baggage, and more.
In addition to the EPC specifications the G2iL offers an integrated Product Status Flag
(PSF) feature and read protection of the memory content.
On top of the G2iL features the G2iL+ offers an integrated tag tamper alarm, RF field
detection, digital switch, external supply mode, read range reduction and data transfer
mode.

SL3S1213
NXP Semiconductors
2 Features and benefits
SL3S1203_1213
UCODE G2iL and G2iL+
2.1 Key features
UHF RFID Gen2 tag chip according EPCglobal v1.2.0 with 128 bit EPC memory
Memory read protection
Integrated Product Status Flag (PSF)
Tag tamper alarm
RF field detection
Digital switch
Data transfer mode
Real Read Range Reduction (Privacy Mode)
External supply mode where both the READ & WRITE range are boosted to -27dBm
2.1.1 Memory
128-bit of EPC memory
64-bit Tag IDentifier (TID) including 32-bit factory locked unique serial number
32-bit kill password to permanently disable the tag
32-bit access password to allow a transition into the secured state
Data retention: 20 years
Broad international operating frequency: from 840 MHz to 960 MHz
Long read/write ranges due to extremely low power design
Reliable operation of multiple tags due to advanced anti-collision
READ protection
WRITE Lock
Wide specified temperature range: -40 °C up to +85 °C
2.2 Key benefits
2.2.1 End user benefit
Prevention of unauthorized memory access through read protection
Indication of tag tampering attempt by use of the tag tamper alarm feature
Electronic device configuration and / or activation by the use of the digital switch / data
transfer mode
Theft deterrence supported by the PSF feature (PSF alarm or EPC code)
Small label sizes, long read ranges due to high chip sensitivity
Product identification through unalterable extended TID range, including a 32-bit serial
number
Reliable operation in dense reader and noisy environments through high interference
suppression
2.2.2 Antenna design benefits
High sensitivity enables small and cost efficient antenna designs
Low Q-Value eases broad band antenna design for global usage
SL3S1203_1213
Product data sheet
COMPANY PUBLIC
All information provided in this document is subject to legal disclaimers.
Rev. 4.5 — 12 February 2019
178845
© NXP B.V. 2019. All rights reserved.
2 / 42


Features SL3S1203_1213 UCODE G2iL and G2iL+ Rev. 4.5 — 12 February 2019 178845 Produc t data sheet COMPANY PUBLIC 1 General description NXP’s UCODE G2iL series t ransponder ICs offer leading-edge read range and support industry-first featur es such as a Tag Tamper Alarm, Data Tra nsfer, Digital Switch, and advanced pri vacy-protection modes. Very high chip s ensitivity (-18 dBm) enables longer rea d ranges with simple, single-port anten na designs. When connected to a power s upply, the READ as well as the WRITE ra nge can be boosted to a sensitivity of -27 dBm. In fashion and retail the UCOD E G2iL series improve read rates and pr ovide for theft deterrence. For consume r electronics the UCODE G2iL series is suited for device configuration, activa tion, production control, and PCB taggi ng. In authentication applications the transponders can be used to protect bra nds and guard against counterfeiting. T hey can also be used to tag containers, electronic vehicles, airline baggage, and more. In addition to the.
Keywords SL3S1213, datasheet, pdf, NXP, UCODE, G2iL, L3S1213, 3S1213, S1213, SL3S121, SL3S12, SL3S1, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)