Document
Discrete direct acting 2 port solenoid valve for compressed air, manifold (special purpose valve)
FAB Series
NC (normally closed) type, NO (normally open) type Port size: M5, Rc1/8 to Rc1/2
Refer to Ending 17 for more details.
JIS symbol
NC (normally closed) type OUT
IN NO (normally open) type
OUT
IN
Common specifications
Descriptions
FAB
Working fluid
Compressed air
Working pressure
0 to 1.4
differential range MPa (Refer to the maximum working pressure differential on the individual specifications)
Withstanding pressure (water pressure) MPa
2.1 (1.5 for FAB11/21)
Fluid temperature
AC: -10 to 60, DC: -10 to 40 (no freezing)
Ambient temperature
AC: -20 to 60, DC: -20 to 40
Heat proof class
B
Atmosphere
No corrosive gas and flammable
Valve structure Valve seat leakage cm3/min. (ANR)
Direct acting poppet structure 0.2 or less
Installation attitude
Free
Protective structure
IP65 or equivalent (Note 1)
Note 1: The T-type terminal box type is IP61 or equivalent, and the FAB11 compact terminal box type is IP40 or equivalent.
Individual specifications
Descriptions Model no.
Port size
Orifice (mm)
NC (normally closed) type
FAB11- M5 -Z -1
M5
FAB21- 6 -1
Rc 1/8
-2
FAB31-
6 8
-2
-3
-6
FAB41-
8 10
-3
-5
-7
Rc 1/8 Rc 1/4
Rc 1/4 Rc 3/8
FAB51- 10 -5
-6
FAB51-
10 15
-7
-8
Rc 3/8
Rc 3/8 Rc 1/2
NO (normally open) type
FAB32-
6 8
-2
-3
-6
FAB42-
8 10
-3
-5
Rc 1/8 Rc 1/4
-7
FAB52-
8 10
-5
-6
Rc 1/4 Rc 3/8
-7
1 1.5 1.5 2 2 3 5 3 4 7 4 5 7 10
2 3 5 3 4 7 4 5 7
Flow
characteristics
Max. working pressure differential
Max.
working
MPa pressure
C[dm3/(s bar)] b AC DC MPa
Rated voltage
Rated electric power (VA) Power consumption (W)
At holding At starting AC 50Hz 60Hz 50Hz 60Hz 50/60Hz
Weight DC (kg)
0.12 0.64 0.7 0.7 0.28 0.52 0.3 0.3 0.28 0.52 1.0 1.0 0.55 0.59 0.6 0.6 0.55 0.56 1.4 1.4 1.2 0.56 1.0 0.6
3.4 2.6 5 4.6 2.3/1.6 3 0.07
1.0 100 VAC
50/60Hz 5.3 3.7 10 9
2.7/2
4 0.12
110 VAC 60Hz 7.5 5.5 20 17
4/3.4 6.5 0.21
3.1 0.50 0.3 0.15 1.2 0.56 1.4 1.4
200 VAC 50/60Hz
2.1 0.54 1.0 0.9 1.4 220 VAC 15 11 40 35 7.5/6.5 8 0.37
5.7 0.48 0.25 0.15
AC60Hz
2.1 0.54 1.2 1.2
3.1 0.50 0.7 0.8 5.7 0.48 0.3 0.3
24 VDC 12 VDC 20 16 55 45 11/9.5 11.5 0.60
5.5 0.41 0.15 0.15
0.57 1.2
0.53 1.1 1.1 0.57 0.55 0.55
100 VAC 50/60Hz 11.5 8 25 22 4.6/3.2
6 0.31
3.0 0.48 0.2 0.2 1.2 0.50 0.9 0.9
110 VAC 60Hz
*3
2.1
0.54 0.55 0.55
1.4
200 VAC 50/60Hz
18
14
45
40
7.5/6.5
8 0.54
5.2 0.41 0.15 0.15
220 VAC
2.1 0.54 0.8 0.8
60Hz
3.0 0.52 0.5 0.5 5.2 0.41 0.25 0.25
24 VDC 25 20 60 50 12 VDC
11/10 11.5 0.71
*1: Use the allowable voltage fluctuation range within 10% of the rated voltage.
*2: The leakage current must be less than values given at right. *3: 8.6 (W) for 12 VDC. *4: Effective sectional area S and sonic conductance C are converted
as S 5.0 x C.
Leakage current
Voltage Model no. FAB1 FAB2 FAB3/4/5
100 VAC 200 VAC 24 VDC 12 VDC
2mA or less 1 mA or less 3mA or less 1.5.