Document
LMD02 thru LMD10
Glass Passivated Bridge Rectifiers Reverse Voltage 200 to 1000V Forward Current 0.5A
Features
• Glass passivated standard bridge rectifiers • Ideal for automated placement • Low forward voltage drop • Low leakage current • Moisture sensitivity: level 1, per J-STD-020 • Solder dip 260°C, 10 seconds
Applications
For use of general purpose AC-DC bridge rectifications in power supplies, chargers, office
appliances,home appliances and telecom devices.
LPMB
Maximum Ratings (TA = 25°C unless otherwise noted)
Parameter
Symbol
LMD02
LMD04
LMD06
LMD08
LMD10
Unit
Maximum Repetitive Peak Reverse Voltage
VRRM
200
400
600
800
1000
V
Maximum RMS Voltage
VRMS
140
280
420
560
700 V
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
Peak Forward Surge Current (8.3 ms single half sine-wave superimposed on rated load)
VDC IF(AV) IFSM
200
400 600
0.5 (1) 0.8 (2)
30
Rating for Fusing (t<8.3ms)
I2t
3.7
Operating Junction and Storage Temperature Range
TJ, TSTG
- 55 to + 150
Electrical Characteristics (TA = 25°C unless otherwise noted)
Parameter
Test Conditions
Symbol
LMD02
LMD04
Maximum Instantaneous Forward Voltage
Maximum DC Reverse Current at Rated DC Blocking Voltage
0.4 A TA=25°C TA=125°C
VF IR
Typical Junction Capacitance 4.0 V, 1 MHz
CJ
LMD06
1 5 100 15
Thermal Characteristics
Parameter
Symbol
LMD02
LMD04
Parameter
RθJA RθJA RθJL
Notes: 1. On glass epoxy PCB, mounted on 1.3*1.3mm solder pads 2. On 20*20mm aluminum substrate PCB with 1.3*1.3mm solderr pads
LMD06
85 (1) 70 (2) 20 (1)
1/3
800 LMD08 LMD08
1000
V A A A2sec °C
LMD10
Unit V µA pF
LMD10
Unit
°C/W
LMD02 thru LMD10
Glass Passivated Bridge Rectifiers Reverse Voltage 200 to 1000V Forward Current 0.5A
Ratings and Characteristics Curves
(TA = 25°C unless otherwise noted)
Figure 3. Typical Forward Characteristics
Figure 4. Typical Reverse Characteristics
2/3
Package Outline Dimensions
LMD02 thru LMD10
Glass Passivated Bridge Rectifiers Reverse Voltage 200 to 1000V Forward Current 0.5A
LPMB
DIM Unit: mm
Unit: inch
MIN MAX MIN MAX
A 1.2 1.35 0.047 0.053
A1 0 0.1 0.000 0.004
B 0.5 0.75 0.020 0.030
C 0.1 0.25 0.004 0.010
D 2.54 typ.
0.10 typ.
E1 4.7 4.9 0.185 0.193
E2 4.7 4.9 0.185 0.193
L 0.4 0.7 0.016 0.028 HE 6.65 6.95 0.262 0.274
Mounting pad layout
in mm(inch)
Packing Information
Packing quantities: 3000 pcs/Reel, 14 Reels/Box; 12mm Tape, 13" Reel Marking: LD02-LD10
Tape & Reel Specification
www.goodarksemi.com
3/3 Doc.USLMD02-LMD10xSD3.0
.