SN74HC02-Q1 GATE Datasheet

SN74HC02-Q1 Datasheet, PDF, Equivalent


Part Number

SN74HC02-Q1

Description

QUADRUPLE 2-INPUT POSITIVE-NOR GATE

Manufacture

etcTI

Total Page 13 Pages
Datasheet
Download SN74HC02-Q1 Datasheet


SN74HC02-Q1
SN74HC02-Q1
QUADRUPLE 2-INPUT POSITIVE-NOR GATE
D Qualified for Automotive Applications
D ESD Protection Exceeds 1500 V Per
MIL-STD-883, Method 3015; Exceeds 200 V
Using Machine Model (C = 200 pF, R = 0)
D Wide Operating Voltage Range of 2 V to 6 V
D Outputs Can Drive Up To 10 LSTTL Loads
D Low Power Consumption, 20-µA Max ICC
description/ordering information
The ’HC02 device contains four independent 2-input
NOR gates. They perform the Boolean function
Y = A + B or Y = A B in positive logic.
SCLS530A − AUGUST 2003 − REVISED 2008
D Typical tpd = 8 ns
D ±4-mA Output Drive at 5 V
D Low Input Current of 1 µA Max
D OR PW PACKAGE
(TOP VIEW)
1Y
1A
1B
2Y
2A
2B
GND
1
2
3
4
5
6
7
14 VCC
13 4Y
12 4B
11 4A
10 3Y
9 3B
8 3A
ORDERING INFORMATION{
TA
PACKAGE
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
SOIC − D
−40°C to 125°C
TSSOP − PW
Tape and reel
Tape and reel
SN74HC02QDRQ1
SN74HC02QPWRQ1
HC02QQ1
HC02QQ1
For the most current package and ordering information, see the Package Option Addendum at the end of this
document, or see the TI web site at http://www.ti.com.
Package drawings, thermal data, and symbolization are available at http://www.ti.com/packaging.
FUNCTION TABLE
(each gate)
INPUTS
AB
OUTPUT
Y
HX
L
XH
L
LL
H
logic diagram (positive logic)
A
B
Y
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright 2008, Texas Instruments Incorporated
1

SN74HC02-Q1
SN74HC02-Q1
QUADRUPLE 2-INPUT POSITIVE-NOR GATE
SCLS530A − AUGUST 2003 − REVISED 2008
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 7 V
Input clamp current, IIK (VI < 0 or VI > VCC) (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA
Output clamp current, IOK (VO < 0 or VO > VCC) (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA
Continuous output current, IO (VO = 0 to VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±25 mA
Continuous current through VCC or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA
Package thermal impedance, θJA (see Note 2): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86°C/W
PW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113°C/W
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
2. The package thermal impedance is calculated in accordance with JESD 51-7.
recommended operating conditions (see Note 3)
MIN NOM MAX UNIT
VCC Supply voltage
2 5 6V
VCC = 2 V
1.5
VIH High-level input voltage
VCC = 4.5 V
3.15
V
VCC = 6 V
4.2
VCC = 2 V
0.5
VIL Low-level input voltage
VCC = 4.5 V
1.35 V
VCC = 6 V
1.8
VI Input voltage
0
VCC
V
VO Output voltage
0
VCC
V
VCC = 2 V
1000
t/v Input transition rise/fall time
VCC = 4.5 V
500 ns
VCC = 6 V
400
TA Operating free-air temperature
−40 125 °C
NOTE 3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
2 POST OFFICE BOX 655303 DALLAS, TEXAS 75265


Features SN74HC02-Q1 QUADRUPLE 2-INPUT POSITIVE-N OR GATE D Qualified for Automotive App lications D ESD Protection Exceeds 1500 V Per MIL-STD-883, Method 3015; Exceed s 200 V Using Machine Model (C = 200 pF , R = 0) D Wide Operating Voltage Range of 2 V to 6 V D Outputs Can Drive Up T o 10 LSTTL Loads D Low Power Consumptio n, 20-µA Max ICC description/ordering information The ’HC02 device contains four independent 2-input NOR gates. Th ey perform the Boolean function Y = A + B or Y = A • B in positive logic. S CLS530A − AUGUST 2003 − REVISED 200 8 D Typical tpd = 8 ns D ±4-mA Output Drive at 5 V D Low Input Current of 1 A Max D OR PW PACKAGE (TOP VIEW) 1Y 1 A 1B 2Y 2A 2B GND 1 2 3 4 5 6 7 14 VC C 13 4Y 12 4B 11 4A 10 3Y 9 3B 8 3A OR DERING INFORMATION{ TA PACKAGE‡ OR DERABLE PART NUMBER TOP-SIDE MARKING SOIC − D −40°C to 125°C TSSOP − PW Tape and reel Tape and reel SN74H C02QDRQ1 SN74HC02QPWRQ1 HC02QQ1 HC02QQ 1 † For the most current package and ordering information, see the Package Option A.
Keywords SN74HC02-Q1, datasheet, pdf, etcTI, QUADRUPLE, 2-INPUT, POSITIVE-NOR, GATE, N74HC02-Q1, 74HC02-Q1, 4HC02-Q1, SN74HC02-Q, SN74HC02-, SN74HC02, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)