www.vishay.com
RCL e3
Vishay Draloric
Long Side Termination Thick Film Chip Resistors
RCL e3 resistors series are the perfect choice for most fields of power measurement electronics where reliability, stability, power dissipation, and robust design is of major concern.
Typical applications include power electronics in automotive and industrial appliances.
FEATURES • Enhanced power rating • Long side terminations • Enhanced thermal cycling performance • Pure tin solder contacts on Ni barrier layer,
provides compatibility with lead (Pb)free and lead containing soldering processes • AEC-Q200 qualified • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
APPLICATIONS • Automotive • Industrial • Commercial
TECHNICAL SPECIFICATIONS
DESCRIPTION
RCL0406 e3
RCL0612 e3
RCL1020 e3
RCL1218 e3
Imperial size
0406
0612
1020
1218
Metric size code
RR1016M
RR1632M
RR2550M
RR3246M
Resistance range
1 Ω to 1 MΩ; jumper (0 Ω)
1 Ω to 2.2 MΩ; jumper (0 Ω)
Resistance tolerance
± 5 %; ± 1 %
Temperature coefficient
± 200 ppm/K; ± 100 ppm/K
Rated dissipation, P70 (1) Operating voltage, Umax. ACRMS/DC Permissible film temperature, ϑF max. (1) Operating temperature range
0.25 W 50 V
0.75 W 75 V
1.0 W 200 V 155 °C -55 °C to +155 °C
1.0 W 200 V
Max. resistance change at P70 for resistance range, |ΔR/R| after:
1000 h
≤ 1.0 %
8000 h
≤ 2.0 %
Permissible voltage against ambient (insulation):
1 min, Uins
100 V
100 V
300 V
300 V
Notes
(1) Please refer to APPLICATION INFORMATION below (2) Specified power rating requires dedicated mounting conditions to achieve the required thermal resistance
RCL1225 e3 1225
RR3263M 1 Ω to 1 MΩ; jumper (0 Ω)
2.0 W (2) 200 V
300 V
APPLICATION INFORMATION
When the resistor dissipates power, a temperature rise above the ambient temperature occurs, dependent on the thermal resistance of the assembled resistor together with the printed circuit board. The rated dissipation applies only if the permitted film temperature is not exceeded.
These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime.
Revision: 12-Jul-17
1 Document Number: 20046
For technical questions, contact:
[email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
www.vishay.com
RCL e3
Vishay Draloric
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE
TYPE / SIZE
TCR
TOLERANCE
± 200 ppm/K
±5%
RCL0406 e3
± 100 ppm/K Jumper, Imax. = 4 A
± 200 ppm/K
±1% ≤ 10 mΩ
±5%
RCL0612 e3
± 100 ppm/K Jumper, Imax. = 6 A
± 200 ppm/K
±1% ≤ 10 mΩ
±5%
RCL1020 e3
± 100 ppm/K Jumper, Imax. = 10 A
± 200 ppm/K
±1% ≤ 10 mΩ
±5%
RCL1218 e3
± 100 ppm/K Jumper, Imax. = 7 A
± 200 ppm/K
±1% ≤ 20 mΩ
±5%
RCL1225 e3
± 100 ppm/K Jumper, Imax. = 12 A
±1% ≤ 10 mΩ
Note
• The temperature coefficient of resistance (TCR) is not specified for 0 Ω jumpers
RESISTANCE 1 Ω to 1 MΩ 1 Ω to 1 MΩ
0Ω 1 Ω to 1 MΩ 1 Ω to 1 MΩ
0Ω 1 Ω to 1 MΩ 1 Ω to 1 MΩ
0Ω 1 Ω to 2.2 MΩ 1 Ω to 2.2 MΩ
0Ω 1 Ω to 1 MΩ 1 Ω to 1 MΩ
0Ω
E-SERIES E24
E24; E96 -
E24 E24; E96
E24 E24; E96
E24 E24; E96
E24 E24; E96
-
PACKAGING
TYPE / SIZE
RCL0406 e3
RCL0612 e3 RCL1020 e3 RCL1218 e3 RCL1225 e3
CODE
EA = ET1 EB = ET5 EC = ET6 EA = ET1 EB = ET5 EC = ET6 EF = E02 EK = ET9 EG = E67 EH = E82
QUANTITY
5000 10 000 20 000 5000 10 000 20 000 4000 4000 2000 4000
PACKAGING STYLE
Paper tape acc. to IEC 60286-3, Type 1a
Blister tape acc. to IEC 60286-3, Type 2a
WIDTH 8 mm 12 mm
PITCH
4 mm
4 mm
4 mm 8 mm 4 mm
PACKAGING DIMENSIONS Ø 180 mm/7" Ø 285 mm/11.25" Ø 330 mm/13" Ø 180 mm/7" Ø 285 mm/11.25" Ø 330 mm/13"
Ø 180 mm/7"
PART NUMBER AND PRODUCT DESCRIPTION
Part Number: RCL061210K0FKEA Part Number: RCL06120000Z0EA
RCL 0 6 1 2 1 0K0 FKEA
MODEL
RCL0406 RCL0612 RCL1020 RCL1218 RCL1225
RESISTANCE
R = decimal K = thousand
M = million 0000 = jumper
TOLERANCE
F=±1% J=±5% Z = jumper
TCR
K = ± 100 ppm/K N = ± 200 ppm/K
0 = jumper
Product Description: RCL0612 100 10K 1 % ET1 e3 Product Description: RCL0612 0R0 ET1 e3
RCL0612
100
10K
MODEL
RCL0406 RCL0612 RCL1020 RCL1218 RCL1225
TCR
± 100 ppm/K ± 200 ppm/K
RESISTANCE
10R = 10 Ω 1K = 1 kΩ 10K = 10 kΩ 1M0 = 1 MΩ 0R0 = jumper
1%
TOLERANCE ±1% ±5%
ET1
PACKAGING
ET1 ET5 ET6 ET9 E02 E67 E82
PACKAGING EA EB EC EF EG EH EK
e3
LEAD (Pb)-FREE e3 = pure tin termination finish
Revision: 12-Jul-17
2 Document Number: 20046
For technical questions, contact:
[email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET F.