PIC18LF26K42 Microcontrollers Datasheet

PIC18LF26K42 Datasheet, PDF, Equivalent


Part Number

PIC18LF26K42

Description

High-Performance Microcontrollers

Manufacture

Microchip

Total Page 30 Pages
Datasheet
Download PIC18LF26K42 Datasheet


PIC18LF26K42
PIC18(L)F24/25K42
28-Pin, Low-Power, High-Performance Microcontrollers
with XLP Technology
Description
The PIC18(L)F24/25K42 microcontroller family is available in 28-pin devices. This family features a 12-bit ADC with
Computation (ADC2) automating Capacitive Voltage Divider (CVD) techniques for advanced touch sensing, averaging,
filtering, oversampling and threshold comparison, Temperature Sensor, Vectored Interrupt Controller with fixed latency
for handling interrupts, System Bus Arbiter, Direct Memory Access capabilities, UART with support for Asynchronous,
DMX, DALI and LIN transmissions, SPI, I2C, memory features like Memory Access Partition (MAP) to support
customers in data protection and bootloader applications, and Device Information Area (DIA) which stores factory
calibration values to help improve temperature sensor accuracy.
Core Features
• C Compiler Optimized RISC Architecture
• Operating Speed:
- Up to 64 MHz clock input
- 62.5 ns minimum instruction cycle
• Two Direct Memory Access (DMA) Controllers
- Data transfers to SFR/GPR spaces from
either Program Flash Memory, Data
EEPROM or SFR/GPR spaces
- User-programmable source and destination
sizes
- Hardware and software-triggered data
transfers
• System Bus Arbiter with User-Configurable
Priorities for Scanner and DMA1/DMA2 with
respect to the main line and interrupt execution
• Vectored Interrupt Capability
- Selectable high/low priority
- Fixed interrupt latency
- Programmable vector table base address
• Device Information Area (DIA) stores:
- Temp sensor factory-calibrated data
- Fixed Voltage Reference calibration data
- Device ID
• 31-Level Deep Hardware Stack
• Low-Current Power-on Reset (POR)
• Configurable Power-up Timer (PWRT)
• Brown-Out Reset (BOR)
• Low-Power BOR (LPBOR) Option
• Windowed Watchdog Timer (WWDT)
- Variable prescaler selection
- Variable window size selection
- Configurable in hardware or software
Memory
• Up to 128 KB Flash Program Memory
• Up to 8 KB Data SRAM Memory
• Up to 1 KB Data EEPROM
• Memory Access Partition (MAP)
- Configurable boot and app region sizes with
individual write-protections
• Programmable Code Protection
- Configurable Boot and App region sizes
• Device Information Area (DIA) stores:
- Temp Sensor factory-calibrated data
- Fixed Voltage Reference
- Device ID
Operating Characteristics
• Operating Voltage Range:
- 1.8V to 3.6V (PIC18LF2X/4X/5XK42)
- 2.3V to 5.5V (PIC18F2X/4X/5XK42)
• Temperature Range:
- Industrial: -40°C to 85°C
- Extended: -40°C to 125°C
Power-Saving Functionality
• DOZE mode: Ability to run CPU core slower than
the system clock
• IDLE mode: Ability to halt CPU core while internal
peripherals continue operating
• SLEEP mode: Lowest power consumption
• Peripheral Module Disable (PMD):
- Ability to disable hardware module to minimize
power consumption of unused peripherals
2016-2017 Microchip Technology Inc.
Preliminary
DS40001869B-page 1

PIC18LF26K42
eXtreme Low-Power (XLP) Features
• Sleep mode: 60 nA @ 1.8V, typical
• Watchdog Timer: 720 nA @ 1.8V, typical
• Secondary Oscillator: 580 nA @ 32 kHz
• Operating Current:
- 4 uA @ 32 kHz, 1.8V, typical
- 45 uA/MHz @ 1.8V, typical
Digital Peripherals
• Three 8-Bit Timers (TMR2/4/6) with Hardware
Limit Timer (HLT)
• Four 16-Bit Timers (TMR0/1/3/5)
• Four Configurable Logic Cell (CLC):
- Integrated combinational and sequential logic
• Three Complementary Waveform Generators
(CWGs):
- Rising and falling edge dead-band control
- Full-bridge, half-bridge, 1-channel drive
- Multiple signal sources
- Programmable dead band
- Fault-shutdown input
• Four Capture/Compare/PWM (CCP) modules
• Four 10-bit Pulse Width Modulators (PWMs)
• Numerically Controlled Oscillator (NCO):
- Generates true linear frequency control and
increased frequency resolution
- Input Clock: 0 Hz < fNCO < 32 MHz
- Resolution: fNCO/220
• DSM: Data Signal Modulator
- Multiplex two carrier clocks, with glitch pre-
vention feature
- Multiple sources for each carrier
• Programmable CRC with Memory Scan:
- Reliable data/program memory monitoring for
fail-safe operation (e.g., Class B)
- Calculate CRC over any portion of program
memory
• Two UART Modules:
- Modules are Asynchronous, RS-232, RS-485
compatibility.
- One of the UART modules supports LIN Mas-
ter and Slave, DMX mode, DALI Gear and
Device protocols
- Automatic and user-timed BREAK period
generation
- DMA Compatible
- Automatic checksums
- Programmable 1, 1.5, and 2 stop bits
- Wake-up on BREAK reception
- Automatic and user-timed BREAK period
generation
PIC18(L)F24/25K42
• One SPI module:
- Configurable length bytes
- Arbitrary length data packets
- Receive-without-transmit option
- Transmit-without-receive option
- Transfer byte counter
- Separate Transmit and Receive Buffers with
2-byte FIFO and DMA capabilities
• Two I2C modules, SMBus, PMBus™ compatible:
- Dedicated Address, Transmit and Receive
buffers
- Bus Collision Detection with arbitration
- Bus time-out detection and handling
- Multi-Master mode
- Separate Transmit and Receive Buffers with
2-byte FIFO and DMA capabilities
- I2C, SMBus, 2.0 and SMBus 3.0, and 1.8V
input level selections
• Device I/O Port Features:
- 25 I/O pins (PIC18(L)F24/25/26/27K42)
- 36 I/O pins (PIC18(L)F45/46/47K42)
- 44 I/O pins (PIC18(L)F55/56/57K42)
- One input only pin
- Individually programmable I/O direction,
open-drain, slew rate, weak pull-up control
- High-current source/sink for direct LED drive
- Interrupt-on-change
- Three External Interrupt Pins
• Peripheral Pin Select (PPS):
- Enables pin mapping of digital I/O
• Hardware Limit Timer (HLT):
- Hardware monitoring and Fault detection
• Signal Measurement Timer (SMT):
- 24-bit timer/counter with prescaler
2016-2017 Microchip Technology Inc.
Preliminary
DS40001869B-page 2


Features PIC18(L)F24/25K42 28-Pin, Low-Power, Hig h-Performance Microcontrollers with XLP Technology Description The PIC18(L)F2 4/25K42 microcontroller family is avail able in 28-pin devices. This family fea tures a 12-bit ADC with Computation (AD C2) automating Capacitive Voltage Divid er (CVD) techniques for advanced touch sensing, averaging, filtering, oversamp ling and threshold comparison, Temperat ure Sensor, Vectored Interrupt Controll er with fixed latency for handling inte rrupts, System Bus Arbiter, Direct Memo ry Access capabilities, UART with suppo rt for Asynchronous, DMX, DALI and LIN transmissions, SPI, I2C, memory feature s like Memory Access Partition (MAP) to support customers in data protection a nd bootloader applications, and Device Information Area (DIA) which stores fac tory calibration values to help improve temperature sensor accuracy. Core Fea tures • C Compiler Optimized RISC Arc hitecture • Operating Speed: - Up to 64 MHz clock input - 62.5 ns minimum instruction cycle • Two Direct.
Keywords PIC18LF26K42, datasheet, pdf, Microchip, High-Performance, Microcontrollers, IC18LF26K42, C18LF26K42, 18LF26K42, PIC18LF26K4, PIC18LF26K, PIC18LF26, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)